0850265005162

Everlast

Model PowerPro 164

Internet #204629271

PowerPro 164 TIG / Stick / Plasma welder

$1,344.24 /box

Frequently Bought Together

Product Overview

The PowerPRO 164 has it all, in one convenient package. With it, you can TIG weld, stick weld, or even plasma cut. It’s ideal for applications where space and budget are limitations. It also is ideal for portable repair with the 120-Volt/240-Volt dual voltage design feature. You can even TIG weld aluminum, with the 160-amp AC/DC output. You’ll be able to easily cut up to 3/8 in. and sever up to 5/8 in. With stick you’ll be able to weld with any size electrode up to 1/8 in. in diameter. The compact size and relatively light weight is due to its advanced IGBT inverter design. All functions are easily accessible with a flip of the switch, and a changeover of the torches and gas supply. AC Frequency and AC balance control extends the capability of the AC TIG feature. It includes nearly everything you need to get started welding and cutting. You’ll need filler metal, Argon shielding gas for TIG, Stick welding electrodes for stick, and an air compressor capable of 4.5 CFM at 90 PSI for plasma cutting. Helmet and PPE are not included.

  • 5 year warranty makes it ideal for home hobbyists, portable repair, and lights all purpose use
  • An AC/DC TIG, DC stick, and plasma cutter, all in one unit
  • Cut up to 3/8 in. with 40-Amp of power
  • Weld up to a maximum of 3/16 in. in a single pass with 160 amp TIG or 130-amp stick capability (240-volt)
  • Dual voltage 120-volt/240-volt uses auto sensing technology so no rewiring is necessary
  • AC frequency and AC balance control for advanced AC TIG capability

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

7 Questions9 Answers

Customer Questions & Answers

PowerPro 164 TIG / Stick / Plasma welder
PowerPro 164 TIG / Stick / Plasma welder

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Plasma Cutting

This question is from PowerPro 164 TIG / Stick / Plasma welder
Asked by
Read all my Q&A
December 19, 2015
Does the plasma cutter operate on 110v, and if yes how thick of metal can you cut?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

December 21, 2015
Answer: 
yes, plasma cutter does work on 110v, but you lose about 1/2 cutting power, and can only go up to 20-25 amps. that means instead of 1/2", you will only cut 1/4".
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
California
Read all my Q&A
Home Improvement Profile: Other
December 21, 2015
Answer: 
Hi Benny this machine operates on 120 volts. You can cut up to 3/8th and sever 5/8th.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

How many amps does it draw on 110 volts?

This question is from PowerPro 164 TIG / Stick / Plasma welder
Asked by
Read all my Q&A
October 3, 2015
I'm wondering fi I could use this welder from my solar-powered battery bank and 2,000 watt inverter?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

October 7, 2015
Answer: 
well, the spec sheet says on 110V it draws 25 Amps regular / 31 Amps max... so, 2K watts may not be enough.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
San Jose, Ca
Read all my Q&A
Home Improvement Profile: Professional
October 5, 2015
Answer: 
John,
This may help, My Miller MaxStar 200 which I ran at 150 amp on 110V for 3 mins at a time. Should not pull 12-12.5 amps when welding TIG, had a meter Clamp on it
Now depending on how many amps your Voltage input to the Inverter from your solar setup. Need to do some Electrical math with PIE. These are basic Step Up Inverters just like your Solar unit.
The higher the Voltage the less Current draw, Read More
John,
This may help, My Miller MaxStar 200 which I ran at 150 amp on 110V for 3 mins at a time. Should not pull 12-12.5 amps when welding TIG, had a meter Clamp on it
Now depending on how many amps your Voltage input to the Inverter from your solar setup. Need to do some Electrical math with PIE. These are basic Step Up Inverters just like your Solar unit.
The higher the Voltage the less Current draw, hopefully you have a Hybrid inverter that does both 110 /220
Good Luck,
Mike Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

would a 10000 watt gen do the job to run both welder and air compesser

This question is from PowerPro 164 TIG / Stick / Plasma welder
Asked by
Read all my Q&A
May 23, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

May 25, 2016
Answer: 
well, the welder only needs ~4.5K-5K watts. so if your air compressor needs 5K watts or less, i don*t see why not.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

It's me I found you

This question is from PowerPro 164 TIG / Stick / Plasma welder
Asked by
Read all my Q&A
November 8, 2015
do I need to purchase a separate compressor to use the plasma cutter or is one built in also what all is includes . I've got 23 yrs welding experience. Thanks again
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 10, 2015
Answer: 
None of our welders have compressors built-in. They all have gas / air line input / output connections. As far as what*s included, pretty much all you need to start welding / cutting: *ground clamp, stick holder, argon reg, plasma air filter, gas hoses, TIG torch, TIG foot pedal, plasma torch, consumables starter kits, for both, TIG and plasma (no tungsten), and a pigtail adapter for 110/220V input*.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
2 »
  • 2016-08-27 T16:29:43.424-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204629271, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 44ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 88ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;