Model # SuperCut 50P

Internet #205350905

Everlast SuperCut 50P Plasma Cutter
0850265005193

Everlast

SuperCut 50P Plasma Cutter

$63631 /box
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The SuperCut 50P is designed as a basic, economical solution to metal cutting needs. With up to 50 amps of cutting power this lightweight MOSFET based inverter is built for the hobbyist that have occasional metal cutting tasks of up to 1/2 in. The unit is capable of cutting more when called upon, but delivers best cuts at 3/8 in. or less. It features a High Frequency start with a pilot arc to help in cutting rusty, painted, or expanded metal. It's compact; shoe-box size allows it to be neatly stored under work benches, and in tool cabinets. The dual voltage 120-Volt/240-Volt design allows it to be used almost anywhere there is power available (120-Volt restricts total amp output and cutting capacity). With a little practice, almost anyone, even a complete novice can become skilled at plasma cutting. If you are just looking to try your hand at plasma cutting before you make a huge financial commitment, this unit can certainly provide the basic training you need.
  • Simple, convenient to use and operate
  • Good learning curve
  • Compact, and easily stowed when not in use
  • Dual Voltage 120-volt/240-volt design allows it to be used anywhere single phase power is present, (larger breaker may be needed for 120-volt operation
  • Great "starter" unit
  • Low current draw

Product Overview

The SuperCut 50P is designed as a basic, economical solution to metal cutting needs. With up to 50 amps of cutting power this lightweight MOSFET based inverter is built for the hobbyist that have occasional metal cutting tasks of up to 1/2 in. The unit is capable of cutting more when called upon, but delivers best cuts at 3/8 in. or less. It features a High Frequency start with a pilot arc to help in cutting rusty, painted, or expanded metal. It's compact; shoe-box size allows it to be neatly stored under work benches, and in tool cabinets. The dual voltage 120-Volt/240-Volt design allows it to be used almost anywhere there is power available (120-Volt restricts total amp output and cutting capacity). With a little practice, almost anyone, even a complete novice can become skilled at plasma cutting. If you are just looking to try your hand at plasma cutting before you make a huge financial commitment, this unit can certainly provide the basic training you need.

  • Simple, convenient to use and operate
  • Good learning curve
  • Compact, and easily stowed when not in use
  • Dual Voltage 120-volt/240-volt design allows it to be used anywhere single phase power is present, (larger breaker may be needed for 120-volt operation
  • Great "starter" unit
  • Low current draw

Compare Similar

Price
$622.28 /each
$636.31 /box
$749.00 /box
$795.39 /box
Name 60 Amp Non-Touch Pilot Arc IGBT Inverter Plasma Cutter for Metal, 220V, 3/4 Inch Clean Cut SuperCut 50P Plasma Cutter SuperUltra 205 TIG / Stick / Plasma Welder PowerPlasma 50 Plasma Cutter
Brand Lotos Everlast Everlast Everlast
Ratings (2) (3) (4) (8)
Engine Power Electric (AC) Electric (AC) Electric (AC) Electric (AC)
Welder Type Plasma Cutter Plasma Cutter Arc,Multi-Process,Plasma Cutter,Stick,TIG Plasma Cutter
Voltage (volts) 120 120 120
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
15
Product Height (in.)
11
Product Width (in.)
7

Details

Engine Power
Electric (AC)
Input Power (Volts)
220
Maximum amperage output (amps)
50
Minimum amperage output (amps)
10
Returnable
90-Day
Tools Product Type
Power Tool
Torch included
Yes
Voltage (volts)
120
Votlage Input
220
Welder Type
Plasma Cutter

Warranty / Certifications

Manufacturer Warranty
3 years warranty

Specifications

Dimensions

Product Depth (in.)
15
Product Height (in.)
11
Product Width (in.)
7

Details

Engine Power
Electric (AC)
Input Power (Volts)
220
Maximum amperage output (amps)
50
Minimum amperage output (amps)
10
Returnable
90-Day
Tools Product Type
Power Tool
Torch included
Yes
Voltage (volts)
120
Votlage Input
220
Welder Type
Plasma Cutter

Warranty / Certifications

Manufacturer Warranty
3 years warranty

More Products With These Features

Search

Questions & Answers

What size air compressor is needed with this plasma cutter ?

What size air compressor is needed with this plasma cutter ?
Asked by: TRN
90 psi, 30-60 gallon tank with a 3.5-4 cfm flow rate
Answered by: John
Date published: 2017-07-03

what is included in this package?

hoses, tips ,clamps or anything to use for this product
Asked by: craig
Cutter (with air regulator and moisture trap), Torch, a small consumable set (6 tips and electrodes), 240 to 120v adapter, grounding clamp, a basic mask, wire brush and a small carrying bag. It can be ready to go in about 15 mins, right out of the box.
Answered by: John
Date published: 2017-07-03

Is this machine the supercut 51P?

Asked by: SeBen
No, this listing is for the Everlast SuperCut 50PPlasma Cutter.
Answered by: CommunityAnswer
Date published: 2017-07-22

Where would you buy your consumables

Asked by: Madgow
  • y_2017, m_9, d_21, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_205350905, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms
  • QUESTIONS, PRODUCT

Customer Reviews

SuperCut 50P Plasma Cutter is rated 4.0 out of 5 by 3.
Rated 5 out of 5 by from This cutter was easy to assemble except for the plug. It was set up for an electrical outlet like... This cutter was easy to assemble except for the plug. It was set up for an electrical outlet like ones used for washer/dryers. This is not the type of receptacle commonly is use in workshops. The plug was molded onto the cord and not removable. I had to cut it off and re-wire a different plug. Not that hard, but I would prefer no plug at all, rather than this solution. The cutter works very well and I especially like the tip guide. Size, weight and power are amongst the best at a bargain price. Very good value. However, despite repeated posts on Home Depot website/forum, I cannot find anyone who will sell me the expendables. This would prevent me from buying one again, all they have to do us respond. Overall, good product at a good price.
Date published: 2017-07-03
Rated 2 out of 5 by from Air pressure regulator bad out the box Everlast makes good products, I have Other everlast products and they work fine, I think I way have just gotten a bad apple, i could have called everlast and they would have shipped me another regulator or have me bring it to a shop to fix, that would have been fine if I had had it for some months but being that it was fresh out of the box I just returned the whole unit, who wants to work on something brand new, I do recommend their products but bad experience with this one
Date published: 2017-07-06
Rated 5 out of 5 by from supercut 50p cutter works pretty good I have cut a lot of steel with it already does great 3/8" or less. 7/16" wasn't to bad 1/2" is a bit much it will cut it but its not real pretty. consumables last me a long time as long as you hold the torch right and try to avoid blowback into the tip. Easy to setup and easy to use. it is a bit pricey for a Chinese cutter of its size but I like the warranty they offer and the company is in the states I already emailed there support and actually got a response almost instantly from a tech. One thing they messed up on mine is that its a mosfet machine and somehow it got labeled with the igbt decals. Torch is comfortable straight lines I clamp a straight edge to work 5/8' from my mark and run torch down on the flat side of the included standoff and I get cnc quality cuts I also made a adjustable circle cutter real easy ill post a pic. over all it seems to be a good machine and with the warranty you cant beat it.
Date published: 2015-04-28
  • y_2017, m_9, d_21, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_205350905, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 133ms
  • REVIEWS, PRODUCT