Model # 202

Internet #202366687

Store SKU #645295

Express Products Quick Door Hanger 10 Door Value Pack
0857844002024

Express Products

Quick Door Hanger 10 Door Value Pack

$42.00 /each

Frequently Bought Together

Product Overview

This 10 door value pack contains a unique patented bracket system used for the easy and hassle-free installation of pre-hung interior doors. Using this quick, fail-proof system, doors can be installed accurately in as little as 5 minutes without the hard work of shimming. For beginners to pros. No Shimming and Zero Nailing Through the door jamb.

  • Each pack contains 60 brackets, which is enough for 10 complete interior prehung door installations, all screws included
  • No shims required, up to 75% faster than traditional methods using shims
  • Easy to use with solid-core or hollow-core interior doors
  • Install doors plumb with a perfect reveal
  • Saves time and money for beginners to pros
  • Patented design allows for door casing/trim to be installed directly over top of brackets, completely concealing them, resulting in a very strong, and sturdy, professional door installation
  • (60) steel brackets with plumb alignment notches used to install ten single pre-hung doors
  • (60) #6 x 1-5/8 in. stud screws
  • (180) #7 x 1/2 in. bracket jamb screws

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

can these be used to install solid core 8' doors?

can these be used to install solid core 8' doors?
Asked by: jenica
yes, but can only be used with a flat jam, not a pre hung with trim
Answered by: Tim
Date published: 2016-12-06

Is there any need to support the other side of the jamb when installing solid core doors?

Example: I have looked at the manual and can't figure out what I did wrong.
Asked by: TByrd
If you mean during the installation process, then not necessarily, if you can keep the frame inside the rough opening. If you mean as a finished product, then yes. Solid core doors are heavy, so the more support the better.
Answered by: MVPathome
Date published: 2016-09-02

Exterior doors?

The description states these are for pre-hung interior doors, what should I use for pre-hung exterior doors? These look like they're a wonderful product, but I've got two exterior doors to install as well as the interior doors.
Asked by: Nona
I use them on all doors. Heavier doors I also shim and nail as you would traditionally. But the clips allow for more wiggle room and a better overall fit in the end.
Answered by: BrianDC
Date published: 2016-11-09

hiw do i hang if foundation problems cause not to be square

Asked by: jewels
Same as you would normally. I find out which way the floor slopes first and lift the low side of the door up. Plumb that side first, then I usually go by the reveal around the door as a guide rather than use the clip hashmarks. Sometimes being slightly out of plumb looks better to the eye and the door functions better. I assume it's because the door/door jambs are probably not all cut perfectly.
Answered by: BrianDC
Date published: 2016-11-09
  • y_2017, m_2, d_23, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_, sid_202366687, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 43ms
  • QUESTIONS, PRODUCT

Customer Reviews

Quick Door Hanger 10 Door Value Pack is rated 4.7 out of 5 by 127.
Rated 5 out of 5 by from Helps hanging framed door easy. We are replacing all the doors in the house so I bought this as it saves money then buying the separate individual packs. I am also using 12 on each door instead of the 6 that come in a single pack. I am putting them on both sides of the door as mentioned in some install videos online and also shown on the installation guide by the mfg of the door. I start on the hinge side make sure that side is plumb and the corner is square. Make sure the top is level and then work the other side. I have had to adjust the door when I realized the carpet was uneven and unneeded to raise the door. These were easy to adjust. I still used some shim but not to hang the door. The door frame was not straight and there are some areas that needed to be moved but were not where the hangers were.
Date published: 2016-12-09
Rated 5 out of 5 by from TIME SAVER! I have been in the construction field for over 10 years and have hung quit a few pre-hung doors during that time. I have seen these clips around for a while but i never pulled the trigger. I decided to try them out on this renovation Im working on now since I had 22 doors to hang. This product made it super easy. I was able to hang all the doors by myself in one day while my guys tiled and it was an absolute pleasure. Not only did they work as advertised but adjusting the doors was super easy just back off the screws move the door jamb and re-tighten. I used maybe 3 shims on the whole job. Not to mention that I didn't have to whip out the air compressor and trip over the air hose all day long. Just an impact driver a tool belt and a 6' level. I would say that if you have even one door to hang these things are worth it. If you have a bunch to hang then its a no brainer.
Date published: 2016-07-20
Rated 5 out of 5 by from These things are even more than they suggest. I hate hanging doors. I really hate hanging doubl... These things are even more than they suggest. I hate hanging doors. I really hate hanging double closet doors. These little gizzmos make it a breeze for absolute rookies if you follow the directions and you watch the video. I still shimmed after the doors were hung just because I think that offers a bit more support for the jamb. But these are worth every penny.
Date published: 2016-12-06
Rated 4 out of 5 by from Good for hanging the door in the frame They are made of a light gauge metal, bend easily which I suppose is helpful for countersinking the screws in the sheetrock so they don't get in the way of the trim. Still a very good idea to shim the doorframe also, as these are too flexible to be relied upon themselves. Still very handy on the install, made hanging doors a one-man job
Date published: 2016-09-06
Rated 5 out of 5 by from General contractor Been hanging doors for over 40 years. Great product. Watched on YouTube and the guy was using 12 on a door, 6 on each side. You only need 6 on one because once you install the trim the door becomes tighter. Again great product.
Date published: 2016-11-29
Rated 5 out of 5 by from Outstanding These make it so simple for a person who is not a trim carpenter to hang the doors quickly and correctly, especially if your doing it by yourself. Great product
Date published: 2017-01-04
Rated 5 out of 5 by from This was our first experience with hanging doors. These made the process SO much easier. Would ... This was our first experience with hanging doors. These made the process SO much easier. Would definitely recommend these.
Date published: 2017-02-14
Rated 5 out of 5 by from Works great Works great, I put them on both side of my heavy doors but for the inexperienced carpenter that I am, it was very easy
Date published: 2017-01-03
  • y_2017, m_2, d_23, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_127
  • loc_, sid_202366687, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 40ms
  • REVIEWS, PRODUCT