Model # 5050080

Internet #203279048

Store SO SKU #1000471022

FAMOWOOD 1 qt. Glaze Coat Clear Epoxy Kit (4-Pack)


1 qt. Glaze Coat Clear Epoxy Kit (4-Pack)

$107.96 /each

Frequently Bought Together

Product Overview

This ultra-clear, high-gloss finishing epoxy is ideal for home improvement and craft projects. FAMOWOOD Glaze Coat is a pour-on epoxy coating that can be used on most surfaces - rough or smooth, stained or painted. It's great for coating tables or bar tops, preserving photographs or imbedding decorative items. Just one coat equals 70 coats of varnish.

  • Self-leveling-minimal spreading required
  • Easy 1:1 mixing ratio
  • Versatile enough to use on most surfaces-smooth or rough, stained or painted
  • Resists temperatures up to 120° F / 48° C
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Anyone please... I thinking in using the epoxy on top of my kitchen counter.. now... My counter h...

Anyone please... I thinking in using the epoxy on top of my kitchen counter.. now... My counter has about 4"in back splach that still part of the whole counter.. it's made of laminate wood bucher block type finish. HOW to keep apply the epoxy on the 4"in area?? Will the heavy glaze start to slide down and form a ripple or wave ? Use a sponge brush?? on this specific area and even it out... ?? Thank you.. Nates555
Asked by: Nates555
You can "paint" thin layers of epoxy over the vertical surfaces. The keyword is THIN. The formula in this stuff is designed for horizontal surfaces where it can level off. If you "paint" the epoxy on thin enough, it will stay and harden. Then repeat until the coating is how you like it. Then work on the horizontal surface.
Answered by: Tarie
Date published: 2017-02-18

Is this product UV approved my project will be out doors

Asked by: ROGER
Answered by: Tarie
Date published: 2017-02-18

Is this food-safe? Can it be used for a kitchen table/food prep surface?

Asked by: Slumom
People use this for countertops, bath sinks, etc... ALL THE TIME
Answered by: Tarie
Date published: 2017-02-18


Based on what poured level thickness 1/8" etc, What is the coverage of a 1gal kit? 3 sq ft? 10sf?
Asked by: Hawaiian
1 US gallon is roughly 231 cubic inches of liquid so a 1/8th inch thick layer would give you a coverage of about 43 inches by 43 inches or just shy of 4 square feet.
Answered by: Art
Date published: 2017-03-24
  • y_2017, m_3, d_27, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_32
  • loc_, sid_203279048, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms

Customer Reviews

1 qt. Glaze Coat Clear Epoxy Kit (4-Pack) is rated 4.0 out of 5 by 9.
Rated 5 out of 5 by from Very easy to mix, did discover it gets best results if you mix extra and flood the surface and av... Very easy to mix, did discover it gets best results if you mix extra and flood the surface and avoid any working of the product, let level and run over. This is wasteful but gets the mirror glossy finish.
Date published: 2016-12-20
Rated 5 out of 5 by from Easy to Use Bought this to seal a bottle cap tabletop (picture attached). The resin was very easy to mix (6 minutes in one bucket, then 6 minutes in a second bucket), and spread evenly and easily over the caps. Wish it were more affordable, however, it is a great product. The only difficulty I had in using the product was not necessarily a product issue, but serves more of a word of advice for anyone who is attempting to encase bottle caps in resin. I had glued the caps to the table before pouring the resin, then fully submerged the caps with resin. There were air pockets between the bottom of the caps and the surface, which led to bubbles coming to the surface. I used a heat gun to pop most of them as the resin was hardening, but they kept coming and a few hardened at the surface (you can see them between the red caps in the photo). If anyone else is attempting a similar project, I would recommend doing a thin layer over everything, but not to the top of the caps, letting it set for a few days, then doing another layer. This would ensure that any bubbles that do occur at least do not effect the flatness of your surface.
Date published: 2015-12-09
Rated 4 out of 5 by from Right spreading tools Overall this is a good product, HOWEVER, get a squeegee or dust pan with a flexible edge if you are going to do large surfaces. Yes to an extent this does self level, especially if you pour huge amounts, but it also sets extremely fast. I was doing a large shuffleboard table top 16ft long. 1 qt should have been adequate. Followed directive to a T. Small brushed on coast first mixing times etc. The main coat set so fast it left trowel marks. Another gallon later I finally figured out a good heavy coast and a squeegee,left things smooth like it should be. Expensive lesson for me to learn. Also as far as directions are concerned, pouring from one bucket to another is important but you only need about 4 minutes of mixing in each bucket instead of the 6 the directions say. Granted my garage was about 85 degrees so that could be part of that issue as well.
Date published: 2015-09-04
Rated 4 out of 5 by from Very good product I applied this product to a Southern Yellow Pine butcher block counter top in my work shop. The result is very good. The product is easy to mix and self levels very well. NOTE: When I mixed the two parts, they did not get hot the way the instructions state. When they did not get hot, or even warm, I thought the product had failed. This was not the case. To get rid of small bubbles the torch worked great; all the bubbles (tiny, small, and medium) disappeared almost instantly. Problem; On my counter top the horizontal pressure of the epoxy made my edging fail. For that reason I lost a lot of product down the sides. I had even nailed the edging into place for containment purposes. For a counter top, use a solid and substantial containment system. That alone would have made a huge difference in my result.
Date published: 2014-04-25
Rated 5 out of 5 by from A great product for my table and bar top The product puts down such a nice, thick clear coat in one application that I am trying to figure out other applications I can use this on around my house. Make sure you read the directions and follow them and the stuff works great.
Date published: 2013-11-22
Rated 4 out of 5 by from Excellent Product I decided to follow the instructions this time, maybe that's why it worked so well, Propane torch to remove tiny air bubbles was very important.
Date published: 2016-08-20
Rated 4 out of 5 by from good product over priced Product is good took about 1 day to harden. Looks great, leveled perfect, did the job.
Date published: 2014-04-02
Rated 4 out of 5 by from good purchess The glaze coat clear epoxy was just the right product I was looking for. It did a great job, and looks beautiful.
Date published: 2014-07-30
  • y_2017, m_3, d_27, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_203279048, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms