Model # 22948

Internet #205167050

FLO-n-STOP Total Household Remote Controlled Wireless Water Shut Off System with Up to 16 Different Wireless Signals to Choose
0674016229481

FLO-n-STOP

Total Household Remote Controlled Wireless Water Shut Off System with Up to 16 Different Wireless Signals to Choose

$29795 /each

Product Overview

The Basic FLO n STOP Wireless Water Shut Off System is designed for single, multifamily and condominium residential dwellings. Convenience and security is assured with the knowledge that your dwelling is protected against accidental water damage from broken water pipes, faulty water appliances, earth tremors, and frozen, then thawed water lines by easily turning off the water supply to the entire home with a touch of the wireless button pad transmitter. The System provides Proactive Wireless Remote Controlled Shut OFF of all household potable water to prevent a water event from occurring.
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The Basic FLO n STOP Wireless Water Shut Off System is designed for single, multifamily and condominium residential dwellings. Convenience and security is assured with the knowledge that your dwelling is protected against accidental water damage from broken water pipes, faulty water appliances, earth tremors, and frozen, then thawed water lines by easily turning off the water supply to the entire home with a touch of the wireless button pad transmitter. The System provides Proactive Wireless Remote Controlled Shut OFF of all household potable water to prevent a water event from occurring.
  • All household water to your home is turned on or off with a touch of a button on the transmitter button pad from a convenient location, transmitter button pad takes 4 AA batteries (not included)
  • Wireless operation, easy to install, no hard wires to run
  • Up to 16 individual user codes available for condominium installations
  • Built in manual override to provide water if the power is lost; valve shuts water off to dwelling in the event of a power outage
  • Works with optional 24/7 water sentinel wireless water floor sensors (Models 22700 and 22701, 22703)
  • Lead free brass solenoid valve is certified to NSF 61 annex G, UL 429 and CSA C22.2 no. 139, conforms to VT 193 and CA AB 1953 for potable, (drinking), water
  • Meets US and Canadian plumbing code standards
  • Lead free solenoid valve is full flow with 1 in. FIP ports in and out, (easily bushes down to 3/4 in. as needed)
  • Solenoid valve operates on a 110-120VAC system
  • U.S. patents 5,881,755 and 8,201,572-B2
  • Suitable for interior or exterior installation and may be situated in any plane (vertical or horizontal)
  • Diaphragm operation slows closing; no water hammer, surge or noise
  • Click here for more information on Electronic Recycling Programs

Product Overview

The Basic FLO n STOP Wireless Water Shut Off System is designed for single, multifamily and condominium residential dwellings. Convenience and security is assured with the knowledge that your dwelling is protected against accidental water damage from broken water pipes, faulty water appliances, earth tremors, and frozen, then thawed water lines by easily turning off the water supply to the entire home with a touch of the wireless button pad transmitter. The System provides Proactive Wireless Remote Controlled Shut OFF of all household potable water to prevent a water event from occurring.

  • All household water to your home is turned on or off with a touch of a button on the transmitter button pad from a convenient location, transmitter button pad takes 4 AA batteries (not included)
  • Wireless operation, easy to install, no hard wires to run
  • Up to 16 individual user codes available for condominium installations
  • Built in manual override to provide water if the power is lost; valve shuts water off to dwelling in the event of a power outage
  • Works with optional 24/7 water sentinel wireless water floor sensors (Models 22700 and 22701, 22703)
  • Lead free brass solenoid valve is certified to NSF 61 annex G, UL 429 and CSA C22.2 no. 139, conforms to VT 193 and CA AB 1953 for potable, (drinking), water
  • Meets US and Canadian plumbing code standards
  • Lead free solenoid valve is full flow with 1 in. FIP ports in and out, (easily bushes down to 3/4 in. as needed)
  • Solenoid valve operates on a 110-120VAC system
  • U.S. patents 5,881,755 and 8,201,572-B2
  • Suitable for interior or exterior installation and may be situated in any plane (vertical or horizontal)
  • Diaphragm operation slows closing; no water hammer, surge or noise
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Inlet Size
1 In.
Product Depth (in.)
2.5
Product Height (in.)
4.75
Product Length (in.)
5
Product Width (in.)
2.5
Valve Inlet Diameter (in.)
1
Valve Outlet Diameter (in.)
1

Details

Application
Water Supply
Color/Finish
Brass
Compatible Pipe Material
Copper
Compatible Product
Other
Connection
FIP x FIP
Features
Lead Free
Indoor/Outdoor
Indoor,Outdoor
Inlet Fitting End Type
FIP
Material
Brass
Maximum Pressure (psi)
232
Maximum Working Temperature (F)
180
Outlet Fitting End Type
FIP
Outlet Size
1 In.
Product Weight (lb.)
2.75lb
Returnable
90-Day
Stop Valve Type
Straight
Valve Configuration
Straight
Valve Connection
Pipe Thread
Valve Type
Supply Stop

Warranty / Certifications

Manufacturer Warranty
One year limited warranty against manufacturer's defect.

Specifications

Dimensions

Inlet Size
1 In.
Product Depth (in.)
2.5
Product Height (in.)
4.75
Product Length (in.)
5
Product Width (in.)
2.5
Valve Inlet Diameter (in.)
1
Valve Outlet Diameter (in.)
1

Details

Application
Water Supply
Color/Finish
Brass
Compatible Pipe Material
Copper
Compatible Product
Other
Connection
FIP x FIP
Features
Lead Free
Indoor/Outdoor
Indoor,Outdoor
Inlet Fitting End Type
FIP
Material
Brass
Maximum Pressure (psi)
232
Maximum Working Temperature (F)
180
Outlet Fitting End Type
FIP
Outlet Size
1 In.
Product Weight (lb.)
2.75lb
Returnable
90-Day
Stop Valve Type
Straight
Valve Configuration
Straight
Valve Connection
Pipe Thread
Valve Type
Supply Stop

Warranty / Certifications

Manufacturer Warranty
One year limited warranty against manufacturer's defect.

More Products With These Features

Search

Questions & Answers

Can it be used with 3/4 pipe?

Could a reducer be used on both ends of the valve to make it work for a 3/4 inch line? Not every home system uses 1 inch. I have 1 inch coming into my meter, but post meter it drops to 3/4. I would not install this pre-meter.
Asked by: Paul
Yes, that is what I did in my house. I just bought the reducer, sweated it in, and everything is fine...
Answered by: Pat
Date published: 2016-11-15

What is the range for the valve from the remote

Will 100 yards be to much of a distance to operate the valve on and off with the remote control?
Asked by: Andy
The receiver and remote look suspiciously like like re-branded X-10 modules. Specifically the HR12A Remote and TM751 Transceiver. The HR12A has a stated range of 100ft, well under your requested 100 yards. However, *IF* they are just re-branded X-10, that works in your favor. There is an entire ecosystem of interchangeable X-10 gear out there, including signal extenders, wired controllers and even PC automation.
Answered by: Ryan
Date published: 2016-12-31

Will you email me an exploded view identifying all the parts of the valve? The literature accomp...

Will you email me an exploded view identifying all the parts of the valve? The literature accompanying the valve is atrocious....hard to follow, in too small print, and at points making no sense (e.g., it refers to "figure 2" when no figures are titled?). Why would I need 16 signals for one home valve? Which buttons should I use to operate the valve remotely?
Asked by: Bill

how many AMPs does the FLO-n-STOP use in operation

I am about to install a FLO-n-STOP mod. 22948 I need to know how many amps the device uses so I can make sure it doesn't over load the circuit its placed in
Asked by: Dennis
  • y_2017, m_9, d_23, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_, sid_205167050, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms
  • QUESTIONS, PRODUCT

Customer Reviews

Total Household Remote Controlled Wireless Water Shut Off System with Up to 16 Different Wireless Signals to Choose is rated 4.7 out of 5 by 9.
Rated 5 out of 5 by from works as advertised... works as advertised
Date published: 2017-05-24
Rated 5 out of 5 by from Installed over the December 2016 holidays. Great product, well worth the price. Plumber needed a... Installed over the December 2016 holidays. Great product, well worth the price. Plumber needed around two hours to fit, including adjusting to the size of the water mains vs. the size of the valve. Worked very well with the wireless sensors, each of which I tested and scattered around the home at vulnerable spots. An important feature when compared to some of the competition is the mechanical auto shut off if electric power is lost, such as during a storm, which would make any plugged in component useless. Have recommended it a few people I know.
Date published: 2017-01-04
Rated 5 out of 5 by from The shut off system was easy to install. The only problem was that the wireless module (the one ... The shut off system was easy to install. The only problem was that the wireless module (the one with the antenna) did not work properly. The problem was that the ON/OFF button did not function at all. I emailed the company, and they are sending a new unit. So hopefully, everything will be fine. Overall, I am happy with this system, I probably should have installed this years ago....
Date published: 2016-11-15
Rated 4 out of 5 by from Does what it says it will do I installed this because of a pipe breaking when I wasn't home. I've had this in my house for two weeks and the valve coil is starting to get loud. I can hear it "humm" in the whole house. I have a call into the manufacturer but haven't heard back yet. Other than that I like the system. It gives great piece of mind knowing my house won't flood again when I'm not home.
Date published: 2015-05-05
Rated 4 out of 5 by from FLO-n-STOP The valve works exactly as I wanted. The company should offer a remote with a single control for those installations that do not require multiple options.
Date published: 2016-07-06
Rated 4 out of 5 by from Flo n stop Valve works the way I want. I wish they supplied a single button remote not the eight way.
Date published: 2016-06-21
Rated 5 out of 5 by from Home Automation Essential A simple addition to my home automation system using an appliance controller adds water security. And the power fail shutoff feature is hard to find in other solutions.
Date published: 2015-01-20
Rated 5 out of 5 by from Fast and Easy Very easy to install!!! I did it myself in less than 1 hour! It is really fantastic the system and valve look very strong and well made!
Date published: 2015-01-19
  • y_2017, m_9, d_22, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_, sid_205167050, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 106ms
  • REVIEWS, PRODUCT