Model # B48-17

Internet #100521674

Store SO SKU #1000418783

Fasade Vinyl Peel and Stick Bermuda Bronze Outlet Cover (2-Pack)

Discontinued Fasade

Vinyl Peel and Stick Bermuda Bronze Outlet Cover (2-Pack)

store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Create a unified, integrated appearance with your backsplash with the Fasade matching finish outlet cover applique. These easy to use outlet cover appliques can be applied to your existing switch and outlet covers and are available in the same finishes as the Fasade backsplash panels. No special tools required.

  • Laminate sheets can be easily cut with a scissors
  • Outlet cover has a peel and stick adhesive backing
  • 1-envelope contains two 6 in. x 12 in. laminate sheets covering up to 6-single outlets or 4-double outlets
  • Laminate sheets can be cleaned with warm soapy water
  • Bermuda bronze outlet cover matches the bermuda bronze Fasade backsplash panels
  • ACP has been an industry leader for 20 years and prides itself on its products

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.



Approximate Tile Size
Product Depth (in.)
Product Height (in.)
Product Width (in.)


Adhesive backing
Bermuda Bronze
Color Family
Decor Product Type
Decorative Accessory
Pack Size

More Products With These Features


Customer Questions & Answers

Will this product ever be available in Bermuda Bronze? that is what i purchased for my back splash.

Will this product ever be available in Bermuda Bronze? that is what i purchased for my back splash.
Asked by: JEL
Hello Jel, Thank you for your recent inquiry with The Home Depot. We do not carry this item in Bermuda Bronze. At this time we are not able to determine if we will carry it in that color. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot.
Answered by: THDSupport
Date published: 2017-06-23

Does a magnetic stick to it ?

Asked by: ArtisticExpert
Hello and thank you for your interest in our product. No, a magnet will not stick to this product. The product itself is a self adhesive film that is used to cover preexisting outlet covers, the Galvanized steel signifies the color of the product. Please feel free to contact our customer care team at 800.434.3750 for any further questions or needed assistance. Thank you!
Answered by: YourFasadeTeam
Date published: 2016-04-19

what is the measurement for the polished copper outlet covers?

Asked by: Anonymous
Hello Laura! Thank you for your question! This is a peel and stick decorative laminate to be applied to your existing switch and outlet covers. One package contains 2 sheets that are 6" x 12" in the finish of your choice. Please feel free to contact customer care for additional troubleshooting (800.434.3750).
Answered by: YourFasadeTeam
Date published: 2015-09-20

Is this product safe to use behind stove?

Asked by: Anonymous
Hello! Thank you for your question! Even though the backsplash panels are fire-retardant, they can be deformed by excessive heat (over 140 degrees Fahrenheit). The panels can be installed above or behind most stoves. Be sure to keep direct heat sources – toaster ovens, cooking burners, etc., a minimum of 6 inches away from the backsplash panel’s surface.
Answered by: YourFasadeTeam
Date published: 2017-04-25
  • y_2017, m_8, d_14, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_100521674, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 127ms

Customer Reviews

Vinyl Peel and Stick Bermuda Bronze Outlet Cover (2-Pack) is rated 3.4 out of 5 by 41.
Rated 3 out of 5 by from Looks Pretty Good, Difficult to Work With The final product looks pretty good, but you must take your time and follow the directions and use a sharp exacto knife or razor. Leave a little more on the sides than the directions say to make sure the wrap folds around the back nicely. My biggest complaint is that the product doesn't adhere well to the back side of the outlet cover. Even after folding tightly and pressing for several minutes the product doesn't want to stick to the back properly. I think Fasade should offer covers that match panels instead of this product. All in all it matches the decorative panels and looks pretty good. We'll see how long it holds up.
Date published: 2013-07-30
Rated 5 out of 5 by from Fasade The online installation video says that you can do a kitchen in 2 hrs. Maybe so if you install this product all the time and you did not and a lot of trimming to do (receptacles, plugs etc). That being said, the product is great and was easy to install. Just be careful and take your time and double check your measurements before cutting. I suggest using the adhesive (tube) rather than the adhesive tape.
Date published: 2011-02-20
Rated 1 out of 5 by from Returned I just spray painted my outlet covers. It was much easier and looked much better than this product.
Date published: 2011-06-25
Rated 4 out of 5 by from Great Idea, but... I believe the intent of the product is an easy cover to make your outlet cover blend in. Which they would earn a 5~Star. The part where you bend the "Stiff" material over to cover the sides is a 50-50 proposition. Because the material is a bit thick I needed to add a touch of glue to hold the edges down.
Date published: 2014-09-30
Rated 1 out of 5 by from Didn't care for it. I tried attempted to attach this product to the outlet covers. It stuck to the front, but I couldn't get it to adhere to the back of the outlets, even with E6000 glue. I ended up saving my time and frustration and bought some really pretty metal outlets with a touch of the copper in them. It saved me a ton of time and I don't have to worry about accidently scratching the surface of the covers. I haven't regretted buying the metal outlet covers at all.
Date published: 2015-01-01
Rated 5 out of 5 by from Easy to work with and it cuts with a scissor! This was the perfect finish to our project. I was afraid it would look like cheap contact paper, but that was far from true.
Date published: 2013-07-19
Rated 4 out of 5 by from Tips for a nice contrasting. installation, that will last. If yee buy them a shade or two lighter OR darker they will stand out as they are supposed to and give contrast. Do not wrap over edges or you'll have fold over at the plates corners. It will make the cover stand off the wall and look ill installed. Use metal unpainted cover plates cleaned with a solvent "alchohol". Before installing for better adhesion. Take your time!
Date published: 2013-11-24
Rated 1 out of 5 by from Outlet/Switch Plate Cover Sticker Does NOT Adhere! JUNK I am an avid Upcycling Crafter; I make awesome stuff out of other people's junk. So when I say this stuff is an epic failure, know... This stuff is 100% WORTHLESS. It didn't adhere to any of the backs of our typical, plastic, Cover Plates no matter how long (>1/2") or short (1/4") we 'over cut' it. Funny that I had cleaned each cover plate w/Dawn dishwashing soap and then with white vinegar to ensure all were free of any oils, dirt, etc. before attempting to my husband insisted it was totally unnecessary and I was wasting time. I set them to 'dry out' for 15 mins, and NOT a single sticker stuck to the back of the cover plate once folded over. Broke out the ModPodge, Locktite Super Glue, Gorilla and a few credit cards. And with both of us pressing firmly down on the credit cards over large area of sticker for a good 1.5mins once glue was applied, still EVERY single sticker cover popped off backside of every cover plate after less than 1 min., no matter which additional adhesive we used. Wasted 4 sheets of this @ $$38 and ended up throwing it all in the trash. I am writing the company directly next. RIDICULOUS, PATHETIC, JUNK!
Date published: 2016-09-16
  • y_2017, m_8, d_14, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_41
  • loc_, sid_100521674, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 116ms