Model # B48-27

Internet #202852545

Store SO SKU #874528

Fasade Vinyl Peel and Stick Smoked Pewter Outlet Cover (2-Pack)

Discontinued Fasade

Vinyl Peel and Stick Smoked Pewter Outlet Cover (2-Pack)

Frequently Bought Together

Product Overview

Create a unified, integrated appearance with your backsplash with the Fasade matching finish outlet cover applique. These easy to use outlet cover appliques can be applied to your existing switch and outlet covers and are available in the same finishes as the Fasade backsplash panels. No special tools required.

  • 1-envelope contains two 6 in. x 12 in. laminate sheets covering up to 6 single outlets or 4 double outlets
  • Available finishes match the Fasade backsplash finishes
  • Outlet cover has a peel and stick adhesive backing
  • Laminate sheets can be easily cut with a scissors
  • Can be cleaned with warm soapy water

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




More Products With These Features


Customer Questions & Answers

Does a magnetic stick to it ?

Asked by: ArtisticExpert
Hello and thank you for your interest in our product. No, a magnet will not stick to this product. The product itself is a self adhesive film that is used to cover preexisting outlet covers, the Galvanized steel signifies the color of the product. Please feel free to contact our customer care team at 800.434.3750 for any further questions or needed assistance. Thank you!
Answered by: YourFasadeTeam
Date published: 2016-04-19

what is the measurement for the polished copper outlet covers?

Asked by: Anonymous
Hello Laura! Thank you for your question! This is a peel and stick decorative laminate to be applied to your existing switch and outlet covers. One package contains 2 sheets that are 6" x 12" in the finish of your choice. Please feel free to contact customer care for additional troubleshooting (800.434.3750).
Answered by: YourFasadeTeam
Date published: 2015-09-20

What is the material used?

In the specs it just gives material as "other." Is it a combination of metals, paper, plastic?
Asked by: Deb
The material is vinyl.
Answered by: CommunityAnswer
Date published: 2016-10-23

Will this product adhere to painted wood?

Asked by: jag
Hello and thank you for your interest in our product. The outlet covers are designed to be adhered to a non porous substrate to allow for the best adhesion. Please feel free to contact our customer care team at 800.434.3750 for further troubleshooting issues. Thank you!
Answered by: YourFasadeTeam
Date published: 2016-07-08
  • y_2017, m_2, d_26, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_, sid_202852545, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms

Customer Reviews

Vinyl Peel and Stick Smoked Pewter Outlet Cover (2-Pack) is rated 3.4 out of 5 by 41.
Rated 1 out of 5 by from Outlet/Switch Plate Cover Sticker Does NOT Adhere! JUNK I am an avid Upcycling Crafter; I make awesome stuff out of other people's junk. So when I say this stuff is an epic failure, know... This stuff is 100% WORTHLESS. It didn't adhere to any of the backs of our typical, plastic, Cover Plates no matter how long (>1/2") or short (1/4") we 'over cut' it. Funny that I had cleaned each cover plate w/Dawn dishwashing soap and then with white vinegar to ensure all were free of any oils, dirt, etc. before attempting to my husband insisted it was totally unnecessary and I was wasting time. I set them to 'dry out' for 15 mins, and NOT a single sticker stuck to the back of the cover plate once folded over. Broke out the ModPodge, Locktite Super Glue, Gorilla and a few credit cards. And with both of us pressing firmly down on the credit cards over large area of sticker for a good 1.5mins once glue was applied, still EVERY single sticker cover popped off backside of every cover plate after less than 1 min., no matter which additional adhesive we used. Wasted 4 sheets of this @ $$38 and ended up throwing it all in the trash. I am writing the company directly next. RIDICULOUS, PATHETIC, JUNK!
Date published: 2016-09-16
Rated 5 out of 5 by from Super Easy to use We used Fasade Vinyl in our kitchen the pattern matches our tile perfectly
Date published: 2016-10-25
Rated 3 out of 5 by from Looks Pretty Good, Difficult to Work With The final product looks pretty good, but you must take your time and follow the directions and use a sharp exacto knife or razor. Leave a little more on the sides than the directions say to make sure the wrap folds around the back nicely. My biggest complaint is that the product doesn't adhere well to the back side of the outlet cover. Even after folding tightly and pressing for several minutes the product doesn't want to stick to the back properly. I think Fasade should offer covers that match panels instead of this product. All in all it matches the decorative panels and looks pretty good. We'll see how long it holds up.
Date published: 2013-07-30
Rated 4 out of 5 by from Great Idea, but... I believe the intent of the product is an easy cover to make your outlet cover blend in. Which they would earn a 5~Star. The part where you bend the "Stiff" material over to cover the sides is a 50-50 proposition. Because the material is a bit thick I needed to add a touch of glue to hold the edges down.
Date published: 2014-09-30
Rated 5 out of 5 by from Fasade The online installation video says that you can do a kitchen in 2 hrs. Maybe so if you install this product all the time and you did not and a lot of trimming to do (receptacles, plugs etc). That being said, the product is great and was easy to install. Just be careful and take your time and double check your measurements before cutting. I suggest using the adhesive (tube) rather than the adhesive tape.
Date published: 2011-02-20
Rated 1 out of 5 by from Returned I just spray painted my outlet covers. It was much easier and looked much better than this product.
Date published: 2011-06-25
Rated 1 out of 5 by from Didn't care for it. I tried attempted to attach this product to the outlet covers. It stuck to the front, but I couldn't get it to adhere to the back of the outlets, even with E6000 glue. I ended up saving my time and frustration and bought some really pretty metal outlets with a touch of the copper in them. It saved me a ton of time and I don't have to worry about accidently scratching the surface of the covers. I haven't regretted buying the metal outlet covers at all.
Date published: 2015-01-01
Rated 5 out of 5 by from Easy to work with and it cuts with a scissor! This was the perfect finish to our project. I was afraid it would look like cheap contact paper, but that was far from true.
Date published: 2013-07-19
  • y_2017, m_2, d_27, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_41
  • loc_, sid_202852545, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms