Model # FIX128

Internet #204777604

Fix-A-Floor 1 Gal. Repair Adhesive


1 Gal. Repair Adhesive

$5497 /each

Frequently Bought Together

Product Overview

Fix-A-Floor is an extra strength repair adhesive customized for the specific use of re-bonding loose and hollow tile, marble, stone and wood flooring without removing or replacing. It’s fast, easy and affordable. DIY - just drill and fill.

  • Elastomeric properties allow for the adhesive to never crack and loose its bond
  • Gallon jug requires a re-fillable caulk gun to apply
  • Great for large problem areas or even the entire floor
  • Dries clear within 24 hours
  • Easy clean up with sponge and water, dries clear
  • Guaranteed for the life of your floor
  • Mostly used by professionals
  • Non-toxic, non-flammable and eco-friendly
  • Fix-A-Floor repair adhesive has super bond strength of 130-135 psi
  • Fix-A-Floor is very fluid: 1800-2700 mPa.s 25°C/77°F
  • Keep from freezing before use
  • Please call 1-800-774-5982 if you require assistance

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

can i use it with a grout bag?

Asked by: johnT
Answered by: Jerry
Date published: 2017-05-08

The glue is much too thick to use with the syringe. Can the glue be thinned? The grout lines are too narrow to use the caulking tubes.

Asked by: Lapalme
The Fix-A-Floor adhesive should work very well with the syringe. Please contact us directly at Fix-A-Floor Worldwide so we can arrange for a replacement jug for you. 800-774-5982 Thank you.
Answered by: Fix-A-Floor Expert
Date published: 2016-02-01

Can I inject Fix A Floor adhesive with a syringe rather than using a caulk gun to minimize size of holes in floor?

Asked by: JLW71
Yes, Absolutely! We have customers that use Fix-A-Floor in a syringe to fill very small drilled holes when they are fixing marble or any kind of flooring with very narrow or even no grout lines at all. Works beautifully on wood floors as well.
Answered by: Fix-A-Floor Expert
Date published: 2015-09-20
  • y_2017, m_5, d_22, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_204777604, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 87ms

Customer Reviews

1 Gal. Repair Adhesive is rated 4.8 out of 5 by 4.
Rated 5 out of 5 by from In our house we have solid hickory flooring that is 3/4" thick. A few of the boards would squeak... In our house we have solid hickory flooring that is 3/4" thick. A few of the boards would squeak when stepped on. We bought a couple tubes of Fix-A-Floor and squirted the adhesive into small holes we drilled in the lose boards. The injected adhesive migrates around under the lose board and fills voids under it. It worked great. No more squeak and was very easy to complete the task.
Date published: 2017-05-08
Rated 5 out of 5 by from Terrific product - did what it's supposed to do. We had many tiles in our family room that were crunchy and sounded like they were going to break. We had had a leak in the ceiling and the water seeped under the tiles and destroyed the stuff that keeps the tiles stuck to the floor. We drilled small holes on the grout near the corners and pushed this white thick liquid inside and it dried and the tiles are now firm and make no noise, nor do they move. It is a really great product that is so much less expensive than replacing the tiles. We had almost 50 tiles that rocked or crunched in varying degrees. To replace those tiles it would have cost us almost $4,500 never mind trying to match the tiles we already had. The house was built in 1978 so matching the tiles may have been impossible. Now the cost to re-glue the tiles with Fix-a-Floor was less than $300. A great saving and really not that hard a job to do. Replacing the tiles would have been a great deal more work and much, much more expensive. Cannot say enough about this stuff, IT WORKS and works very well.
Date published: 2014-07-15
Rated 4 out of 5 by from Good Product Very strong liquid adhesive, when used as directed, if floor was completely hollow it might flow under and exit adjacent hole, but in real world, you will get enough under floor to stiffen it up.
Date published: 2014-01-24
Rated 5 out of 5 by from Worked like a million dollars.. This product was great, I never knew about this item until I went on line at Home Depot. Once I drilled the holes and used a syringe to fill it worked great I had over 10 tiles to fill and I still have a little left over..
Date published: 2015-10-27
  • y_2017, m_5, d_23, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_204777604, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 103ms