Rated 4.7 out of 5 by 34
Rated 4.0 out of 5.0 by Panda floor tile adhesive
I bought a floor tile adhesive that worked well and dried fast. I wish I had known a heavy weight was required during drying to keep the tiles from popping up but other than that I was very happy.
May 3, 2016
Rated 5.0 out of 5.0 by m7p Worked like a charm!
Very easy to use. I am now less worried that the tile may crack.
March 29, 2016
Rated 5.0 out of 5.0 by Sasm It works!
I had porcelain wood plank tiles (long and narrow - approx 2 1/2 ft by 51/2 inches) installed on a concrete slab post super storm Sandy flood when contractors were scarce and there was no choice but to use who was available. This “contractor” did a poor job and within 2 years numerous tiles were creaking and loosening. I decided to try Fix a Floor and it worked as stated. I am now on my second round of repairs (in different areas). The initial repairs a year ago were extremely successful.
Make sure your drill bit is masonry or it will break and that it is narrower than the grout line so you don’t chip the tile. Squeeze easy and steady so the product doesn’t come out the back end due to container breakage. Definitely release the gun pressure before taking the nozzle out of the hole or it will squirt everywhere. Once you get the hang of it, it is very easy to do. My husband drilled the holes and I did the rest.
Buy much more than you think you might need. There were areas where I thought this stuff was going into some bottomless abyss. I used three 10 0z tubes for two tiles and then finally it came up the other hole. If the product backs up from one hole without going elsewhere just go to another hole. This time I have done two areas so far, each about 3 feet by 3 feet and have used 6 1/2- 10oz tubes. I am sure the voids are huge. Also, I had a situation where the product put in one hole came up in another hole but not a third hole. So I put some in the third hole and it came up in the first hole. So it wouldn't flow one way but it flowed the other way. I always try each hole if it doesn't come out of all the holes in the hollow area. Again my tiles are long so I make lots of holes to make sure I get it all.
Once done you cannot ever tell that the tile had been creaky or loose. They are very solid and when I tap, there is no hollow sound. I did tiles which were over heating pipes and are in an area with extremely high traffic and it is still perfect and solid from a year ago.
April 4, 2016
Rated 4.0 out of 5.0 by Northeast Good/Fast solution to fixing hollow tiles...
I had several/loose tiles after tiling my basement floor with those ceramic 6"x24" ceramic wood tiles. At first I tried ripping up 1 or 2 of those tiles and chiseling out the mortar and then remortaring, I would highly recommend not doing this approach... it is very time consuming and very hard to get right. I should say that I also installed electric heat mats under the tile so I was very scared to cut that. With this glue I just took up the tile and then put a whole bunch of the glue down and then set the tile back down... worked great! Try to wipe up the excess glue before it dries though. This 12 pack is a better value than buying 1 separately.
What I learned; always back butter your tiles!
January 12, 2016
Rated 5.0 out of 5.0 by drm So Glad I Found This Product!
Just bought a house. Discovered that there many creaking and hollow floor tiles that were not properly installed on a concrete basement floor. There were too many to remove so tried Fix a Floor. Found it to be somewhat messy but has, so far, stopped the tiles from creaking and now have more of a solid sound when tapped. As others have stated, order a lot more that you think you will need. The stuff is like white runny glue and you can not help but have some waste.
Sure wish HD stocked this product so I can just go to the store and pick it up.
November 16, 2015
Rated 5.0 out of 5.0 by jorge worked as advertised!
great product and idea to repair your floor tiles!
December 16, 2015
Rated 5.0 out of 5.0 by HRec Used over 30 Tubes and Just Ordered More - Amazing, Money Saving Product
I first used this product when only the manufacturer out of FL sold it (2013). I was very skeptical and ordered just two tubes since I thought I was looking at a $10,000 tile replacement. The owner (Tracy Hilton) answered my emails quickly. The first tube went into the black hole of my loose tile never to come out of any other drilled holes. My first thought was, “This is going to be very expensive”! I used up the second tube, weighted down the area in question, and the next day the tiles were solid as a rock! My neighbors were impressed and I immediately ordered more. Since I needed it the next day, I emailed Tracy a shipping label and she drove it to FedEx and dropped it off for me. As a woman that owns my own business, I appreciate that she goes the extra mile like I have to do myself for customers. I ended up using about 30 tubes and the hardest part was matching up my old non-existent grout color, not the Fix-a-Floor application. Home Depot sells another product – a grout dye that solved that problem. I had to order my color on their website since it was not a stock color. The tile dept employee was great. He had to call the manufacturer, get the sku that was not in the HD system, then he phoned me back to let me know it was on order for me! The Home Depot dye product was easy clean up and after months of foot traffic you cannot tell that I dyed the grout lines. I HIGHLY RECOMMEND THIS PRODUCT. IF YOU ARE NOT SURE, BUY ONE OR TWO TUBES LIKE I DID FOR A TEST, THEN BUY THE CASE.
July 12, 2014
Rated 5.0 out of 5.0 by Jimbo Repairs to tile flooring
Using this product is saving a great deal of money and labor. my insurance denied relief on the repair or replacement of 500 sq ft. My options were to remove and replace the tile since it was no longer available, or find some means of repairing it. After searching for a method to repair it, I found Fix-A-Floor. I ordered a case of it and used that case. I found it necessary to order another case to complete the repairs. The damage was from an under counter filter that failed causing about 2 inches of water on the floor. one large section of the tile mortar had separated from the floor. The repairs have made the tile stick to the floor again. I am well satisfied with the product!
June 2, 2015