Model # FIX030

Internet #204775853

Fix-A-Floor 30 oz. Repair Adhesive


30 oz. Repair Adhesive

$22.97 /each

Frequently Bought Together

Product Overview

Fix-A-Floor is an extra strength repair adhesive customized for the specific use of re-bonding loose and hollow tile, marble, stone and wood flooring without removing or replacing. It’s fast, easy and affordable. This large 30 oz. contractor size tube has a wider tip and is best for areas with wider grout lines of 3/16 in. or larger.

  • Elastomeric properties allow for the adhesive to remain permanently flexible so it will never crack and loose its bond
  • Larger size tube is best for areas with wider grout lines of 3/16 in. or larger
  • Designed for use with a large contractor size caulk gun
  • Dries clear in 24 hours
  • Easy clean up with sponge and water, dries clear
  • Guaranteed for the life of your floor
  • Works great on small or large problem areas
  • Non-toxic, non-flammable and eco-friendly
  • Great DIY project, see how-to videos
  • Fix-A-Floor repair adhesive has a super bond strength ANSI tested of 130-135 psi
  • Fix-A-Floor is very fluid 1800-2700 mPa.s 25°C/77°F
  • Keep from freezing before use

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

How long before you can allow foot traffic after using fix a floor?

Asked by: Leb
Within 24 hours...
Answered by: Fix-A-Floor Expert
Date published: 2016-09-02

Does the remaining adhesive dries after opening?

If I cut the tip of the tube and only use it partly, can I tape the tip and keep it in storage for future use?
Asked by: JoeyV
Answered by: Fix-A-Floor Expert
Date published: 2016-06-14

Is this product suitable for re-glueing the laminate floor threshold strips that bridge between a wood laminate floor room and the adjacent slate hall

The adhesive the installers used has become dried up and I've had to remove the glue residue from the laminate threshold strips as well as the residue on the doorway floor sections. It has been suggested that I use "construction grade glue" to re-install the strips....rather than one of many Liquid Nail products.
Asked by: Tony
Yes, Fix-A-Floor will re bond the threshold, however I think any construction glue or liquid nails would also work as you are simply re gluing the threshold down onto the floor.
Answered by: Fix-A-Floor Expert
Date published: 2015-10-30


Asked by: MIKE
  • y_2017, m_3, d_28, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_204775853, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 26ms

Customer Reviews

30 oz. Repair Adhesive is rated 3.2 out of 5 by 19.
Rated 5 out of 5 by from Worker for me... I did break the tip by using too much force about 2/3 through the tube, but pour... Worker for me... I did break the tip by using too much force about 2/3 through the tube, but poured in to a bowl and used a large baster syringe to apply. I liked the syringe better. Am ordering two more large tubes for more outside slate fixes.
Date published: 2017-02-13
Rated 3 out of 5 by from Product works however -not easy to apply comes out as... Product works however -not easy to apply comes out as pure liquid can be very messy if you not VERY handy - you may have to drill many holes if the thin set does not allow you to fill all the hollow spots- the video is a joke because it does not represent the typical situation - hire an expert !!!
Date published: 2017-02-21
Rated 2 out of 5 by from Big bottle was a mess My husband used this for our tiles and the first thing he said was the bottle made a big mess. Second there are also oil looking stains on our tiles that I can see in certain lighting. It did help a little but the grout is still cracking in some spots
Date published: 2016-12-06
Rated 5 out of 5 by from Great value, work fine Tip, drill several holes on grout join to find a path to the tile cavity, on my second try worked just perfect, good luck!
Date published: 2016-07-20
Rated 1 out of 5 by from Didn't work for me I was really hoping this stuff would work but it didn't. I live in a slab house with a porcelain tile floor that I installed myself years ago. After watching the video I was a bit skeptical how easy this stuff went under the tiles. I thought it was going in very easy until I looked at the base of the tube where all the glue had accumulated. Customer service suggested I use a right angle hook to remove some tile mud away from the edge of the tile, but that's almost impossible to do as the tiles are close together. Before buying this stuff I recommend you drill a few small holes in your grout and use a squeeze bottle filled with water to see if the water goes under the tiles. Good luck
Date published: 2015-05-06
Rated 5 out of 5 by from Excellent - perfect fix for the problem. It worked as described. I used more than I expected as reported by many people. Because I ordered the larger tubes, I needed to buy a large 12" caulking gun ($10). I also went through three 3/16" masonry drill bits. I found using a children's medicine syringe worked best for filling the holes. It took longer, but it was less messy and less waste. I still have a few tiles with hollow sounds, but the loose tiles are firm. Much cheaper and easier than pulling up and replacing the tiles.
Date published: 2014-10-14
Rated 4 out of 5 by from Worked as stated but product needs some tweaking I had about 12 ceramic tiles that seemed to loosen and buckled overnight. After some research, Fix a Floor seemed to be the best option for me at the time. I am not very handy at all. It seems to have worked pretty well so far. The application was pretty messy and not as easy as the video. A lot of the adhesive gets wasted as the nozzle quickly bends and gets clogged. As the nozzle gets clogged, the pressure builds up in the tube and leaks out of the back. A better made tube and a stronger more substantial nozzle would have made a big difference. Make sure you don't use a cheap caulking gun. After the first tube I switched out to a better one and that helped. Other than application problems, I am happy with the results so far. I'm not sure how long this will last bu I figure I'm going to have to replace the floor soon but this was a good fix for now.
Date published: 2016-04-07
Rated 1 out of 5 by from I really wanted this to work It makes sense to me, but sadly it did not shoot under my hallow tiles. It just made a huge mess and ultimately the bottle busted from the back end sending glue all over my caulking gun. Hope this can work for other people like it does in their videos
Date published: 2016-09-20
  • y_2017, m_3, d_29, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_, sid_204775853, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 22ms