Flotec Add-A-Jon 1/2 HP Sewage Pump Kit-FP450C - The Home Depot
Discontinued

Flotec

Model # FP450C

Internet # 100665942

Store SKU # 397260

Add-A-Jon 1/2 HP Sewage Pump Kit


Flotec Add-A-Jon 1/2 HP Sewage Pump Kit
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$656.00 / each
Loading...

PRODUCT OVERVIEW

Model # FP450C

Internet # 100665942

Store SKU # 397260

Store SO SKU # 1000897432

Equip your toilet, vanity or non-sewage basin shower with the ability to pump waste water away using this Flotec Add-A-Jon 1/2 HP Sewage Pump Kit. The fully automatic switch activates the self-contained 1/2 HP sewage pump motor to provide easy flushing of your sewage system. The pump may be installed as a freestanding unit on top of almost any surface, making it easy to equip a basement, room addition, factory or warehouse with pump-action plumbing.

  • Pumps 5,400 GPH at 10 ft. lift, emptying a sewage pit quickly (9,000 GPH at 0 ft. lift)
  • 1/2 HP sewage pump is activated by a fully automatic switch to provide optimal output and reliability for draining waste water
  • Designed to empty waste water from a toilet, vanity or non-sewage basin shower; ideal for use in basements, room additions, factories and warehouses
  • Cast-iron housing material and thermoplastic impeller provide durability for long-lasting use
  • Includes 2 in. discharge and check valve assembly
  • Installs easily as a freestanding structure on top of almost any surface

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  22 in  Assembled Height (in.)  40 in 
Assembled Width (in.)  24 in  Product Depth (in.)  24 
Product Height (in.)  40.0 
Details
Amperage (amps)  13  Bottom/End Suction  Yes 
Cord Length (ft.)  10.0  Discharge Flow @ 0 ft. (gallons/hour)  9000 
Discharge Flow @ 10 ft. (gallons/hour)  5400.0  Hardware Required  No 
Horsepower (hp)  1/2 hp  Housing Material  Cast-Iron 
Maximum Working Temperature (F)  77.0  Minimum working temperature (F)  35.0 
Outlet Connection  Plain end  Power Type Required  AC 
Product Weight (lb.)  90 lb  Pump Switch Type  Vertical 
Returnable  90-Day  Self-Priming  Yes 
Solids Handling  Yes  Submersible  No 
Voltage (volts)  115 
Warranty / Certifications
Certifications and Listings  CSA Listed  Manufacturer Warranty  1 year 

CUSTOMER REVIEWS

Rated 2.8 out of 5 by 4 reviewers.
Rated 2 out of 5 by Wait until you need to service it It works well but the design is flawed. You have to raise the floor of you bathroom and you will have to raise the shower/tub in order to flow back into the tank. And wait until you have to service it. I had to replace the float twice! You have all those screws on the top lid and then you have to disconnect the drain pipe and the vent in order to remove the lid..... You can imagine what happens when it doesn't work and all the fluid start to leak from the toilet flange. January 7, 2012
Rated 3 out of 5 by It's ok have had it 2 years nothing to compare it to Have have had this for 2 years now. When you install this make sure you leave yourself as much access to pump as you can because you will be working on it. We had to open it up after a year b/c it wouldn't shut off. Shacking of the pump took care of the problem. Now almost 2 years in pump stopped working and water started coming out from toilet flange. It stunk! Shook pump and it kicked on . Now it works when it wants. I think the switch went bad. We are going to upgrade to the 3/4 hp pump. My father in law did this upgrade a a couple years back and has had no trouble. Although it has been a pain it gets job done when it works. January 5, 2013
Rated 5 out of 5 by works fine this was a first time up flush install i put a bathroom in my parents basement with a toilet shower and sink with a tile floor in three days this kit was a little tricky to put together but i figured it out with little troubles its just figuring out the directions and then just doing it wacth when you make your frame around the tank that is if you dont make the frame first cause i shot a nail in my tank and had to patch it my only real problem was with the seal between the toilet bowl and the plate on the tank there was a little gap so i had to buy a bigger toilet bowl ring so make sure you got one or theirs a store close and open when you are doing this cause it could make a day project in to a two day one if the store is closed the tank is holding up good tho and we have been useing it for a year this tank is made of tough plastic and the pump is good the seals work good just follow the instructions dont shoot nails in to the tank and youll be fine August 6, 2009
Rated 1 out of 5 by Do not buy this type of tank! I have had this toilet tank for over a year now in my basement, and since then there have been this bad sewer smell in the basement every time you flush the toilet down there, and i have tried everything but it seems that the waste does not leave the tank quickly and stays in it for some time. this is a really bad product, and now im even afraid to take it out because of whats in the tank( waste ). there are much better products out there, so dont go cheap on some thing like this March 6, 2012
1-4 of 4

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.