Model # 12IM72

Internet #203763956

Fluidmaster 72 in. Braided Stainless Icemaker Connector
0039961120724

Fluidmaster

72 in. Braided Stainless Icemaker Connector

$1086 /each

Choose Your Options

Product Length (in.)
72

Frequently Bought Together

Product Overview

Fluidmaster icemaker water supply connectors are built to last. Made of a tough polymer core covered with braided stainless steel wire, these connectors exceed every code requirement in the book for durability. Fluidmaster offers a wide variety of types and sizes, perfect for your home improvement efforts.

  • Exceptional flexibility for fast, easy installation
  • Won’t kink or crease, even in the tightest of spaces
  • Heavy-duty brass hex nuts are easy to grip and nickel plated for durability
  • Exceeds all code requirements for flexible water connectors

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Does this have 3/8" or 1/4" connectors?

Asked by: jeffb80
Both. They are actually a revolutionary type of fitting. The fittings are called FlexFit. They can adapt to either 1/4" or 3/8", as simply as threading it on. Good luck!
Answered by: MasterDebater
Date published: 2016-04-16

what size fittings are on this

Fluidmaster 60 in. Braided Stainless Icemaker Connector Model # 12IM60Internet # 203763955
Asked by: Anonymous
I'm not behind my refrigerator now but I believe it's 1/4" compression on both ends. Very typical for icemaker installation.
Answered by: lowiq
Date published: 2015-09-20

What is the I.D. of the internal tube? You say it is larger than normal, but what is it? I require a large hose vs a typical 1/4".

Asked by: mulder
1/4 " compression fittings for your ice maker. That's big enough.
Answered by: ern72
Date published: 2015-11-06

Is the inside of this line stainless steel?

Asked by: Anonymous
A form of rubber
Answered by: ern72
Date published: 2016-04-20
  • y_2017, m_5, d_23, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_, sid_203763956, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 12ms
  • QUESTIONS, PRODUCT

Customer Reviews

72 in. Braided Stainless Icemaker Connector is rated 4.9 out of 5 by 24.
Rated 5 out of 5 by from Perfect fit Used this to replace copper tubing which had corroded over time. Took me 5 minutes to change it out. No leaks.
Date published: 2017-02-21
Rated 5 out of 5 by from Works Great on Samsung Fridge. 1/4" Connectors, Strong Steel Braiding I had to install a new fridge with icemaker/water dispenser in a home that never had one before, where the water line was downstairs and quite a ways from where the fridge would be, this 120" connector line worked perfectly. It's full braided stainless steel line with 1/4" female connectors on each end. These 1/4" ends will fit almost all the icemakers/water lines built into fridges out there. I hooked one end up to the fridge and it screwed on tightly. The other end was screwed onto the shut-off valve and it also went on well with no issues or leaks. Adjust with the proper sized wrench so you don't strip the connector. This is a far better product than cheap vinyl lines and their loose fittings. You can depend on this lines for years to come. There was no odd taste after the line was flushed with around three gallons of water to clean the lines as you should always do after an install of new lines. I will be buying this for any other refrigerator icemaker/water dispenser installs and replacements from now on.
Date published: 2015-05-10
Rated 5 out of 5 by from Perfect in everyway No brain installation. The hose has been installed for around a month now with no leaks, no taste, no problems. Well constructed and the 60" is more than enough for a floor level water output/input application.
Date published: 2013-09-05
Rated 5 out of 5 by from Product real easy to install Had to connect two pieces together since I needed 20 feet of line. Real simple to hook up to fridge and water line under sink. No soldering or having to wonder if the compression connection is correct like in copper lines.
Date published: 2013-05-27
Rated 5 out of 5 by from Not too long, not too short Works fine for icemaker. Most braided SS lines for me were too short or way too long. This one is just perfect.
Date published: 2014-02-04
Rated 5 out of 5 by from Just What We Needed Many reviews from this kind of hose complained about the taste of the ice cubes. I dumped the first bucket and I can't taste the difference between bagged store- bought ice and this. As a matter of fact ,this ice tastes better. Hooked up in less than ten minutes. I'm very satisfied with this product.
Date published: 2014-08-26
Rated 5 out of 5 by from Perfect Length The length was perfect fit for what I needed. There is no after taste from the connector. Should last for many years. Like it a lot better than the copper tubing I had been using for years.
Date published: 2014-08-05
Rated 5 out of 5 by from So long copper tubing!! Easy to use quick connect no leaks, what more can i say?
Date published: 2015-10-20
  • y_2017, m_5, d_23, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_24
  • loc_, sid_203763956, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • REVIEWS, PRODUCT