Rated 4.0 out of 5 by 292
Rated 4.0 out of 5.0 by Bill product stopped the leak.
I've rewriten this review. I first gave it 1 star because it leaked from the tank to the bowl after installation. When putting the tank top back on after photographing it, I discovered that the chain was catching under the rubber attachment loop on the flapper. I had checked that it couldn't reach under the flapper itself and hold it open, but it was long enough to catch under the loop. This is shown in the attached photo. After remedying that, it works fine.
April 2, 2013
Rated 3.0 out of 5.0 by cornbinder Was a good kit until they removed some parts.
It was a perfect kit to rebuild Mansfield toilet tanks until they removed a screw set. Mansfield has 3 screws and now I have to buy an additional screw set to get enough parts. Also most people have replaced their fill valve in those toilets and Home Depot stopped carrying the flush valve assembly by itself so I have to buy the whole kit and have trouble separating out the cost when I only use the flush valve assembly in the kit. I like HD but they keep changing what they got right.
October 8, 2014
Rated 5.0 out of 5.0 by Jason Worked fine for me..but a critical step was not in the instructions.
I purchased this kit to rework the insides of an old Mansfield toilet. All of the parts were included and instructions were fairly detailed. One step that should be included in the instructions, but was not. The overflow tube (the one that the fill hose attaches to) that is part of the flush valve is fairly long, and may need to be trimmed down on some tanks. If it is not trimmed to the proper height (just above the waterline), you could have a flood if they fill valve were to leak or stick open. The reason for this is due to the water reaching the hole in the side of the tank for the handle before it reaches the height of the overflow tube. Trimming it to a height between that of the handle hole and the full water line allows any excess water to safely drain through the toilet.
October 13, 2014
Rated 5.0 out of 5.0 by sheila great product!!
The instructions were great - user friendly - saved me a ton of money hiring a professional AND continues to save money in water use.
December 26, 2013
Rated 5.0 out of 5.0 by TimF Best value and great replacement product
I used this for a complete tank repair and replaced all the tank parts. This took a non-working toilet and it is now the best one of three in my home! I should have bought this kit earlier instead of just a fill valve replacement for my other toilet that I used with a different stopper. I would buy this kit again in the future to make repairs or update/replace non-working parts.
July 28, 2015
Rated 5.0 out of 5.0 by Jim A complete system
I put four stars for installation because to install the entire kit you need to remove and reinstall the tank. You do not need to do this to appreciate the kit, however. This truly is a complete kit and a great buy. the adjustable height and completeness of the kit made it worth purchasing.
September 29, 2015
Rated 5.0 out of 5.0 by AZrob Highly recommend Fluidmaster products. Checkout your actual needs against their different offerings before buying
We had a hybrid flushing device that came on our builder-installed, Mansfield toilets. After 3 years of constantly replacing flush/stopper gaskets, it was time to end the water loss on our 3 toilets. Removal of the toilet tank was necessary since the Mansfield units didn't have the "normal stopper mechanism". Leaks have now stopped & it flushes more easily. Our son also has Mansfield toilets & is plagued with the same issue.
July 21, 2015
Rated 5.0 out of 5.0 by Itsme Installs in minutes
Simple and easy. Just remember to buy a new valve and steel braided water line because most likely they will break during install. For only a few extra bucks you can save a couple of trips and a headache. Great product!!!
September 29, 2015