Rated 4.3 out of 5 by 401
Rated 5.0 out of 5.0 by 10Ring Best Bang for the Buck Toilet Valve
Good instructions, just make sure to read them all. Easy install.
Just make sure you clean any gunk or grit from any surface that needs to be water tight where a rubber gasket will lie.
You might have to keep tightening the nut on the bottom until it stops leaking. The two I've done needed to be tighter than I expected. Don't forget to reuse any other gaskets from the water line.
Also keep in mind you can pop off the top of these and clean/flush them if they're leaky. Sometimes grit gets stuck in the guts and causes a very small slow leak.
July 2, 2014
Rated 5.0 out of 5.0 by Xtrareach Flushometer
Easily install with limit tool and minimal skills. Great product for the money.
February 11, 2015
Rated 4.0 out of 5.0 by uluzul Common item Purchase
This product is easy to install, with well documented instructions. The reliability of this fluid master is good when you compare it with the price of other fluid masters. I buy this item very often.
March 2, 2015
Rated 5.0 out of 5.0 by Renter Universal fill valve...very good, compact design!
Like many, I had the older fill valve with the float ball. The rocker part on top of the fill valve cracked, and was letting the water run. This new style, compact fill valve is very easy to install. There are lots of vids on YouTube if you are not sure about something, but really it's not hard to change the old unit for the new. The only pointer I would give is the make sure the line on the fill valve is 1" above the top of the water tube. If it's too low, you will here the water trying to refill the tank. It's all in the directions though!
February 6, 2015
Rated 5.0 out of 5.0 by gooner A four year old child could install this.
Quick run out and find me a four year old child! Ok, I could not resist the Groucho Marx joke. This is an easy to install, simple, well manufactured product that is a universal fit. Money well spent.
October 10, 2013
Rated 4.0 out of 5.0 by WallyGator Easy install, but very noisy
The fill valve was real easy to adjust and install , but very noisy on filling the tank. I returned the 1st one and the second one was slightly quieter, but our little bathroom still sounds like an airport.
Saying that, I would buy another one based on price, easy install and store location. I'm hoping our hard water will quiet it down over time.
July 5, 2014
Rated 5.0 out of 5.0 by eddieb1032 Nice Design and It Works
So easy, even a caveman do it. I know - that line has been used once before.
You can do this installment with little or no special tools. Instructions are
clearly included in the package. I'm 63 years old and the hardest part was
removing the old rusted fill valve. But with a pair of large vice grips, the old
lock ring came loose and I installed the new fill valve in minutes. I just finger
tightened the lock ring. You don't want to crack the valve or the bowl tank.
I had no leaks and a "new" toilet. Of course, the wife never noticed it.
Maybe that's a good thing.
April 21, 2015
Rated 5.0 out of 5.0 by HANDYMAN QUICKEST TO INSTALL
IF YOU ARE IN A HURRY AND ARE REPLACING THE EXACT ONE, JUST TURN OFF THE WATER AND PULL THE UPPER PART OF THE OLD UNIT OFF. THE NEW ONE WILL SLIDE BACK ON THE OLD LOWER UNIT. YOU CAN REPLACE ONE IN LESS THAN 1 MINUTE. (I WOULDN'T DO THIS FOR A CUSTOMER JOB.)
April 30, 2014