Model # HD0418SB

Internet #202334279

Fortress Screw Jack with Baseplate (4-Pack)
0856989002241

Fortress

Screw Jack with Baseplate (4-Pack)

  • Rugged, galvanized steel construction
  • Adjusts scaffold to desired height
  • Provides stability on uneven ground
$79.99 /package

Frequently Bought Together

Product Overview

This Fortress Screw Jack with Baseplate (4-Pack) is designed to aid in the setup of a scaffold on uneven surfaces, allowing you to easily adjust your unit to the desired height. With a 1-3/8 in. diameter, the screw jack is crafted from durable galvanized steel for lasting use. This set also exceeds ANSI and OSHA requirements to help ensure safety on your jobsite.

  • Used to stabilize scaffolding on uneven ground
  • Lets you adjust the height of your scaffolding tower with ease
  • Made of tough, galvanized steel for durability
  • Exceeds OSHA and ANSI scaffolding regulations for safety
  • Strong threaded shaft is 1-3/8 in. in diameter
  • Includes four screw jacks with baseplates
  • Not compatible with item # 202334302 (6 ft. Rolling Drywall Scaffold) or 202334301 (12 ft. Rolling Drywall Scaffold)

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions4 Answers

Customer Questions & Answers

Screw Jack with Baseplate (4-Pack)
Screw Jack with Baseplate (4-Pack)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

What are the specifications of the scaffle screw jacks with baseplates

This question is from Screw Jack with Baseplate (4-Pack)
Asked by
Denver CO
Read all my Q&A
July 7, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
October 23, 2016
Answer: 
I bought a set of these for a Baker Scaffold (1.5" outside square legs). They fit inside the legs without a problem. You do need to use a 1 3/8 inch (I.D.) washer between the spinner and the leg for use with square legs. The actual size of the screws are:
24 inch tall (note: indent at 6 inch from top to insure at least 6 inches remains in scaffle leg),
Screw outer dia. ~1.34 inch in dia.,
base
Read More
I bought a set of these for a Baker Scaffold (1.5" outside square legs). They fit inside the legs without a problem. You do need to use a 1 3/8 inch (I.D.) washer between the spinner and the leg for use with square legs. The actual size of the screws are:
24 inch tall (note: indent at 6 inch from top to insure at least 6 inches remains in scaffle leg),
Screw outer dia. ~1.34 inch in dia.,
base plate ~ 0.22 inch thick, ~5 3/8 inch square.
Spinner overall length ~ 9 inches
Depth of Spinner hub ~1 3/16 inches
Outer dia. of Spinner hub at point of contact with scaffold ~2.2 inches
Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

July 16, 2015
Answer: 
This product is 8 inches wide, 5 inches deep and 24 inches tall.
-6points
0out of 6found this answer helpful.
Was this helpful?helpful0unhelpful6
 
1 answer

Will these work with concrete tubes?

This question is from Screw Jack with Baseplate (4-Pack)
Asked by
Talkeetna
Read all my Q&A
December 11, 2015
I'm building a cabin on 8 ft pilings and want to know if these screw jacks are sturdy enough to be used if set in concrete on top of a piling. (Using 10" or 12" tubes for concrete)

I want to be able to make adjustments in case there is settling. I would have at least 16 pilings to support a 20' X20' cabin. If this is feasible, can I purchase separate face plates for each screw jack to attach bottom section with concrete screws or plant into cement?

If this is NOT a good use for a screw jack, what do you suggest.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
June 30, 2016
Answer: 
I think you need to check out actual house jacks. Tiger posts for example. Not that a scaffolding jack might not work but.... it also depends on the size of the cabin, the spans, a whole bunch of structural stuff. I understand your desire, mine matches yours but... everything I read about proper construction indicates to build the structure correctly first with the correct materials for the size of Read More
I think you need to check out actual house jacks. Tiger posts for example. Not that a scaffolding jack might not work but.... it also depends on the size of the cabin, the spans, a whole bunch of structural stuff. I understand your desire, mine matches yours but... everything I read about proper construction indicates to build the structure correctly first with the correct materials for the size of technology structure, to place proper fittings, etc, squared up , I.e. do it all right from the beginning. If the structure moves later due to shifting ground, you can make minor adjustments other ways. I seriously doubt it's a good idea to start with the idea of adjusting to begin with, although I also have wondered the same thing. I've NEVER read of serious builds with jacks built-in except in modular builds (do a YouTube search for the "QB 2" house by Mike Page for example or Nomad cube house for example) and THOW' s (Tiny House on Wheels, I.e. trailer). It's still an interesting idea but not sure if it's advisable for 20x20. Check out www.countryplans.com, join their blogs and ask the question again. Their moderators are professionals. See what they say. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

How much does each screw jack with baseplate weigh?

This question is from Screw Jack with Baseplate (4-Pack)
Asked by
Pa
Read all my Q&A
April 15, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Baker, NV
Read all my Q&A
May 16, 2016
Answer: 
About 10 to 12 pounds a piece. I believe the weight was around 44 to 46 pounds for all 4 of them
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
0 answers

Are these solid metal or hollow ?

This question is from Screw Jack with Baseplate (4-Pack)
Asked by
Read all my Q&A
September 2, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T23:52:19.723-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202334279, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 201ms
  • QUESTIONS, PRODUCT

Customer Reviews

Screw Jack with Baseplate (4-Pack) is rated 4.9 out of 5 by 18.
Rated 5 out of 5 by from Good quality screw jack These are good quality screw jacks. Threaded shaft is solid and overall finish was good. Fit my Vanguard staging well.
Date published: 2016-07-19
Rated 5 out of 5 by from Stronger than expected Easy to install and worked well, even with heavy loads.
Date published: 2016-08-16
Rated 5 out of 5 by from Perfect product for my application, highly recommend. Perfect product for my application, highly recommend.
Date published: 2016-11-01
Rated 4 out of 5 by from Good accessory for scaffold I bought these to go with my scaffold, I work on an uneven ground. These made the scaffold level and stable. They did however require some finesse to fit in the scaffold. 2 of them slid right in and the other 2 required a hammer to go in the bottom. Minor problem. If you work on an uneven area, I highly recommend these. They are stout and with a wider foot, it kept the scaffold steady.
Date published: 2016-05-16
Rated 5 out of 5 by from Best purchase made to accompany scaffolds Very good quality and extremely strudy, makes the toughest most uneven jobs a breeze and safe, any time a turned my back my carpenters and foremen were trying to slip some blocks or wood pieces for bracing under the scaffolds, pretty unsafe in most circumstances.
Date published: 2015-12-30
Rated 5 out of 5 by from Screw Jacks sturdy equipment, works and fits well, delivery on time
Date published: 2015-12-23
Rated 5 out of 5 by from A must have for uneven surfaces Installed in scaffolding, spun handle to proper height and leveled the setup. Couldn't be easier. They don't pin into the scaffold because then you couldn't adjust them so they will fall out if you lift the scaffold too high to move it, but when you disassemble you just lift and they are out. Good value and front door delivery.
Date published: 2014-04-16
Rated 5 out of 5 by from Quick and easy. Not a big fan of Home Depot in general but occasionally they have something I can't find from other sources. The free shipping to the house is great too.
Date published: 2015-05-26
  • y_2016, m_12, d_10, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_18
  • loc_, sid_202334279, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 73ms
  • REVIEWS, PRODUCT