Model # 5712

Internet #100072237

Franklin Brass 1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel
0079171571251

Franklin Brass

1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel

$11.61 /each

Frequently Bought Together

Product Overview

Consider your safety in the bathroom, where most home accidents occur. Safety meets sophistication with concealed mount grab bars. Safety First heavy-duty grab bars exceed ADA and ASTM standards while providing extra security in the bath. For persons up to 500 lbs.

  • 1-1/4 in. x 12 in.
  • 1-1/2 in. Wall clearance
  • Concealed mounting with satin stainless steel finish
  • 500 lb. maximum

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions13 Answers

Customer Questions & Answers

1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel
1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
6 answers

Franklin Brass 1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel Installation

This question is from 1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel
Asked by
Sandie
Lakeland FL
October 9, 2012
Why didn't you post the installation information with the answer online?

Can this item be used to assist someone entering their mobile home to get up the last step that is above the railing?
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (6)

Asked by
Plano, TX, USA
Read all my Q&A
April 22, 2014
Answer: 
Should be able to if there is adequate support for mounting behind the skin. Otherwise you might have to bolt all the way through the wall with backing inside.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Ridgecrest, CA
Read all my Q&A
August 22, 2013
Answer: 
Yes, as long as there is sufficient framework to bolt the handle to. A full-size 2x4 framework beneath the surface is quite adequate to support the handle mount.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Las Vegas, NV, USA
Read all my Q&A
August 6, 2013
Answer: 
A FEW SCREWS AND YOUR DONE.
YES IT WOULD BE GREAT FOR A MOBILE HOME
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Youngstown, OH, USA
Read all my Q&A
May 1, 2013
Answer: 
Absolutely, measure the area to better determine the length of grab bar that you can fit. Depending upon your actual area, a vertical (Up & Down) installation would probably be best. Remember proper mounting screws / hardware to insure a solid, safe and secure mounting is essential for safety.
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

Asked by
Arnie
Cincinnati, OH
December 18, 2012
Answer: 
The installation instructions are provided with the grab bar when you purchase it. You select the place where you wish to install the bar. If ADA placement is desired this is available on the Internet. I used the glass bit to drill through the tile using a bit of oil to keep the bit cool. I used a wood drill bit to drill into the wood support.
Yes,If you have a way of mounting the grab bar it could be Read More
The installation instructions are provided with the grab bar when you purchase it. You select the place where you wish to install the bar. If ADA placement is desired this is available on the Internet. I used the glass bit to drill through the tile using a bit of oil to keep the bit cool. I used a wood drill bit to drill into the wood support.
Yes,If you have a way of mounting the grab bar it could be used to get up the last step above the railing. It might be easier to mount a piece of fence top rail as the flanges on the grab bar are fixed in place and probably not at the ideal angle to mount on the mobile home. The angle on the top rail connectors available at the Home Depot are at a better angle. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

October 11, 2012
Answer: 
While the bars are Stainlees Steel they are not tested in outside conditions and harsh weather could shorten the life of the Grab Bar.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
5 answers

How does the mounting to the wall work? What kind of wall anchors are provided?

This question is from 1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel
Asked by
paul
August 5, 2012
Can you provide mounting recommendations?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (5)

Asked by
Ridgecrest, CA
Read all my Q&A
August 22, 2013
Answer: 
A number of 2-1/2" wood screws are provided in the package. If you can find a stud in the desired location, you should be able to safely mount the grab bar in a vertical fashion with the provided screws. If the bar is to be mounted horizontally, however, I would recommend a 16" or 24" long grab bar to match the stud spacing on your wall. You can locate the studs with an inexpensive stud finder.
There Read More
A number of 2-1/2" wood screws are provided in the package. If you can find a stud in the desired location, you should be able to safely mount the grab bar in a vertical fashion with the provided screws. If the bar is to be mounted horizontally, however, I would recommend a 16" or 24" long grab bar to match the stud spacing on your wall. You can locate the studs with an inexpensive stud finder.
There are also toggle bolts provided for mounting the bar to a tiled surface but I'd recommend using screws into the underlying studs into as many opportunities as possible. Toggle bolts are as reliable as the tile or plaster work (a screw into a stud is the safest solution). Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Las Vegas, NV, USA
Read all my Q&A
August 6, 2013
Answer: 
THE SCREWS THAT COME WITH THIS ITEM ARE GOOD ENOUGH
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Youngstown, OH, USA
Read all my Q&A
May 1, 2013
Answer: 
To properly select the appropriate wall anchors for safety reasons, consideration to discuss your mounting area and wall construction, with your local Home Depot Representative, is strongly recommended.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Arnie
Cincinnati, OH
December 18, 2012
Answer: 
Stainless steel screws are provided along with a flange on both ends of the grab bar. Two of the screws on each end should be screwed into the wood stud for greatest strength. Generally the studs are placed 16" on center. I placed my 12" grab bar vertically on a stud. No wall anchors are provided and must be provided by the user if desired. The screws are of sufficient length to give great strength if Read More
Stainless steel screws are provided along with a flange on both ends of the grab bar. Two of the screws on each end should be screwed into the wood stud for greatest strength. Generally the studs are placed 16" on center. I placed my 12" grab bar vertically on a stud. No wall anchors are provided and must be provided by the user if desired. The screws are of sufficient length to give great strength if screwed into the wood stud. You won't be able to pull the bar out of the wall. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 7, 2012
Answer: 
I have attached installation instructions.
-3points
1out of 5found this answer helpful.
Was this helpful?helpful1unhelpful4
 
1 answer

Is this item available in shiny chrome?

This question is from 1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel
Asked by
South San Francisco, CA
Read all my Q&A
December 15, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

December 16, 2015
Answer: 
The closest will be the "SSB" ( Bright Stainless Steel) finish. That will be model # 5712BS.
Kind Regards, emccollum
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

is this product available in white near 94577?

This question is from 1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel
Asked by
Craig
94577
August 28, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
THD Customer Support
Kennesaw, Ga
September 1, 2013
Answer: 
Thank you for your recent inquiry with The Home Depot. This item is not available in the color choice that you are requesting. However, we do have alternative models available via our website. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-31 T01:14:35.034-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100072237, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 77ms
  • QUESTIONS, PRODUCT

Customer Reviews

1 1/4 in. x 12 in. Concealed Screw Grab Bar in Stainless Steel is rated 4.7 out of 5 by 23.
Rated 4 out of 5 by from Great product. However there are 2 "back tabs" sticking out from under the flange. Does not look ... Great product. However there are 2 "back tabs" sticking out from under the flange. Does not look very "classy". Otherwise a great product. We are very pleased with it.
Date published: 2016-12-14
Rated 5 out of 5 by from It is clean, sleek and strong. A good value. It is clean, sleek and strong. A good value.
Date published: 2016-11-03
Rated 4 out of 5 by from It was just as we expected. It was just as we expected.
Date published: 2017-01-10
Rated 5 out of 5 by from Quality at a reasonable price. More installation options than previous grab bars that I've installed. Also, all installation screws were provided in package.
Date published: 2013-08-22
Rated 5 out of 5 by from Satisfacción completa Excelent product higher recommend, easy clean, easy to use
Date published: 2016-06-29
Rated 5 out of 5 by from Sturdy construction, nice finish and professional appearance. Nice blended radii from flange to grab area. Easy to grab and comfortable to hold on to. Flange covers give the appearance of a nice finished look.
Date published: 2013-05-02
Rated 5 out of 5 by from Nice and smooth! I like the shorter ones, but most stores don't carry them, that's why I order them on line. They serve the purpose and don't take up as much room.
Date published: 2015-12-14
Rated 5 out of 5 by from Very satisfied. I am completely happy with this bar, which I had professionally installed. I am most happy about the fact that the screws do not show. This was not a DIY project for me, but I am sure someone with the least amount of expertise and appropriate tools could install this.
Date published: 2014-03-11
  • y_2017, m_1, d_24, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_23
  • loc_, sid_100072237, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 66ms
  • REVIEWS, PRODUCT