Free Shipping and BOPIS

Franklin Brass

Model # 600R

Internet # 100084364

Recessed Wall Clamp

This item has been discontinued.
The Home Depot no longer carries this specific product.

$4.70 /each




Model # 600R

Internet # 100084364

Store SO SKU # 1000724047

Make installation of your recessed commercial products easier and faster with the recessed wall clamp. Screws and instruction sheet are included for easy installation.

  • Constructed of steel material
  • Use when backing/framing is not available
  • Use for chrome and stainless steel recessed items
  • For conventional type installations

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Product Depth (in.) 
Product Height (in.) 
Product Width (in.) 
Product Weight (lb.) 
0.42 lb 
Warranty / Certifications
Certifications and Listings 
No Certifications or Listings 
Manufacturer Warranty 
Limited Lifetime 


Rated 4.6 out of 5 by 30 reviewers.
Rated 2.0 out of 5.0 by Incorrect Parts The bracket I received was tapped at the factory for Metric M4x50 flat head Phillips machine screws. If you use the woods screws which was supplied with the bracket, you will strip the screws. No local Home Depot had these proper screws in the 50mm length, so I had to go to a specialty fastener shop 24 miles from my home. The screws were only 20 cents each, & they had a $1 minimum order, so I got 5 screws. These screws fit perfectly. I spent $7 for gas, round trip 48 miles. Home Depot sent me a $10 gift card for my effort. Good job Home Depot, they did right by me. June 5, 2015
Rated 5.0 out of 5.0 by Excellent product and works as intended I used this clamp with the Franklin Brass Recessed Paper Holder (9097SN). Because Home Depot's website is not very clear on this subject, you MUST have this clamp in order to perform a standard drywall installation of a recessed paper holder. The clamp is placed on the backside of the hole you will cut in the drywall, and is drawn back against the drywall as the screws in the holder are tightened. This makes for an extremely rigid and sturdy installation of the paper holder. May 2, 2011
Rated 5.0 out of 5.0 by quickneasy Attaches easily with the screws supplied by the actual recessed tissue holder. I agree with those reviewers who said this SHOULD be a part of the recessed tissue holder package. One should not have to order this seperately. Once I ordered it, despite there being no instrucitons, I found that it easily fits the hole cut for the tissue holder. (PS, measure the back of the tissue holder as the instructions give a measurement that is too large and may weaken the ability of this clamp to hold) You can attach it to the tissue holder with the screws BEFORE you insert this back piece into the wall and then tighten down the screws. A simple but critical piece that works very well. No cusswords needed. December 11, 2010
Rated 5.0 out of 5.0 by Easy - Peasy The easiest thing I've ever used. Follow the instructions and cut the hole as directed and slide it in on an angle. Then just tighten the screws on your recessed unit. May 26, 2015
Rated 5.0 out of 5.0 by Glad I read the reviews/complaints & ordered it. I was glad I read the complaints in the reviews for the Franklin Brass Double Post Toilet Paper Holder in Bright Stainless Steel, as it wasn't clear to me that you also needed this part. I had contractors do the work, but I think it was easy enough for them to install. The paper holder fits in the wall securely & works fine, so I assume this part is working as advertised. You can just barely see the holder on the wall to the right under the window. July 18, 2013
Rated 5.0 out of 5.0 by Necessary Evil This part is a necessary evil as it wasn't included with the paper holder I purchased and it was for a new installation. I'm thankful to have learned it wasn't included before I purchased the paper holder. I am also thankful to have learned the part number so I could find it in the first place. March 26, 2015
Rated 3.0 out of 5.0 by Works but wrong screws The product is tapped for metric mounting screws, but is supplied with 3 pairs of sheet metal screws. (Stainless, white, and brass...) The screws must be at least 2" long (50mm) but Home Depot only carries 25 mm long screws so I had to go elsewhere. The consumer is forced to chase around for screws... They charged enough for this simple bracket to have the correct screws. How Depot should force the manufacture to provide the correct fasteners in the kit. June 4, 2013
Rated 3.0 out of 5.0 by Instructions incorrect Instructions specify using machine screws. No machine screws in package. After several email and phone calls to Franklin Brass someone contacted engineering and told me that the instructions were incorrect.. The part I received was used and incorrectly repackaged. This part should be used with 9097SN July 31, 2012
  • 2015-11-23 T11:09:48.441-06:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_30, tr_30
  • loc_en_US, sid_100084364, prod, sort_default
2 >>