Model # PFN64

Internet #202072454

Freeman Pneumatic 16-Gauge Strip Straight Nailer
0855629002078

Freeman

Pneumatic 16-Gauge Strip Straight Nailer

  • Ideal for all finish work projects including trim, molding & more
  • Uses 1" to 2-1/2" nails for maximum versatility
  • Backed by the Freeman 7 Year Manufacturers Warranty
$6710 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

  • Ideal for all finish work projects including trim, molding & more
  • Uses 1" to 2-1/2" nails for maximum versatility
  • Backed by the Freeman 7 Year Manufacturers Warranty
This Freeman Pneumatic 16-Gauge Strip Straight Finish Nailer is excellent for fastening 1 in. x 2-1/2 in. nails in carpentry work such as molding, chair rails, door casing and cabinetry and furniture construction. The convenient design allows you to clear jams change the depth drive and adjust the 360° air exhaust without needing any tools. A no-mar tip leaves only a small trace on the work surface to save you time during finishing applications.
  • Anodized aluminum magazine with strip loading
  • Quick-release nose
  • 70 - 110 psi operating pressure
  • No-mar tip protects work surface to reduce finishing time
  • Tool-free jam clearing and depth adjustment
  • 360-degree adjustable exhaust
  • Reversible belt hook
  • Teflon O-rings for less friction
  • 1-piece hardened steel drive blade
  • Lightweight, Die-cast aluminum construction
  • Anodized aluminum cylinder is long lasting
  • For applications such as base molding, chair rails, crown moldings, door casing, cabinetry, furniture construction
  • Compatible with 1 - 2-1/2 in. nails
  • Anti-dust cap and internal air filter for clean operation
  • Need help? CLICK HERE to view our Nail Gun Buying Guide

Product Overview

This Freeman Pneumatic 16-Gauge Strip Straight Finish Nailer is excellent for fastening 1 in. x 2-1/2 in. nails in carpentry work such as molding, chair rails, door casing and cabinetry and furniture construction. The convenient design allows you to clear jams change the depth drive and adjust the 360° air exhaust without needing any tools. A no-mar tip leaves only a small trace on the work surface to save you time during finishing applications.

  • Anodized aluminum magazine with strip loading
  • Quick-release nose
  • 70 - 110 psi operating pressure
  • No-mar tip protects work surface to reduce finishing time
  • Tool-free jam clearing and depth adjustment
  • 360-degree adjustable exhaust
  • Reversible belt hook
  • Teflon O-rings for less friction
  • 1-piece hardened steel drive blade
  • Lightweight, Die-cast aluminum construction
  • Anodized aluminum cylinder is long lasting
  • For applications such as base molding, chair rails, crown moldings, door casing, cabinetry, furniture construction
  • Compatible with 1 - 2-1/2 in. nails
  • Anti-dust cap and internal air filter for clean operation
  • Need help? CLICK HERE to view our Nail Gun Buying Guide

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
3.5
Product Height (in.)
14.5
Product Width (in.)
12.5

Details

Air Tool Type
Air Nailer
Compressor/Air Tool Features
Adjustable Exhaust Port,Fastener Depth Control
Energy Type
Air
Included
No additional components or accessories are included
Loading type
Strip
Maximum Fastener Size
2-1/2 in
Minimum Fastener Size
1 in
Minimum Recommended Air Delivery SCFM @ 90PSI
2.0
Minimum Recommended Operating Pressure (psi)
70
Nail Gauge
16
Nailgun Angle
0
Reconditioned
No
Returnable
30-Day
Tools Product Type
Air Tool

Specifications

Dimensions

Product Depth (in.)
3.5
Product Height (in.)
14.5
Product Width (in.)
12.5

Details

Air Tool Type
Air Nailer
Compressor/Air Tool Features
Adjustable Exhaust Port,Fastener Depth Control
Energy Type
Air
Included
No additional components or accessories are included
Loading type
Strip
Maximum Fastener Size
2-1/2 in
Minimum Fastener Size
1 in
Minimum Recommended Air Delivery SCFM @ 90PSI
2.0
Minimum Recommended Operating Pressure (psi)
70
Nail Gauge
16
Nailgun Angle
0
Reconditioned
No
Returnable
30-Day
Tools Product Type
Air Tool

More Products With These Features

Search

Questions & Answers

Carrying case

Does it come with a carrying case?
Asked by: Canman
No.
Answered by: HandymanJD
Date published: 2017-09-07

Compressor/Air needed?

What type of compressor do I purchase?
Asked by: Lynn
It depends on where and how you intend to use the nail gun. If you need to transport and use the nail gun in different locations, you'll probably want to get a small pancake compressor that is portable. If you are using it in the same place, like a workshop, you may want a larger compressor that can be used for other tasks. I have both, but always use the portable pancake compressor since it cycles on at 70psi and off at 100psi, the pressure range required for the nail gun. My large shop compressor runs up to 135psi which exceeds the rating for the gun, and I haven't seen fit to spend money on a pressure regulator.
Answered by: HandymanJD
Date published: 2017-09-07

Instructions say depth of nail set accomplished two ways: by altering air pressure or using mecha...

Instructions say depth of nail set accomplished two ways: by altering air pressure or using mechanical adjustment on gun. Which is better?
Asked by: Dean
In my opinion, using the mechanical adjustment is the best option since it is based on a positive, mechanical stop. Even with a pressure regulator, you run the risk of having lower than the regulated pressure if you "over-run" the supply capacity of your air compressor and you might not get the depth of nail set you intended on all shots.
Answered by: HandymanJD
Date published: 2017-09-07
  • y_2017, m_9, d_21, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_202072454, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 98ms
  • QUESTIONS, PRODUCT

Customer Reviews

Pneumatic 16-Gauge Strip Straight Nailer is rated 4.5 out of 5 by 12.
Rated 5 out of 5 by from Although I have not used this nail gun extensively, my first use on a project was securing a piec... Although I have not used this nail gun extensively, my first use on a project was securing a piece of 1x2 red oak to some poplar. It drove 2" nails through the 3/4" red oak and into the edge of the poplar with no problem. There were no jams or mis-shot nails. I am very satisfied with this nail gun so far.
Date published: 2017-09-07
Rated 5 out of 5 by from Nice nailer, can't beat the price This was my first nailer and being a novice, I found it was extremely easy to set up and use. Light weight, no jams, and the depth dial made it very easy to set the depth of the nails. Very impressed. I would definitely recommend. Looking to buy a framing nailer now and I would buy another Freeman.
Date published: 2017-05-02
Rated 5 out of 5 by from Worked welll for installing woodwork. Easy to load. Easy to fire. Worked welll for installing woodwork. Easy to load. Easy to fire.
Date published: 2017-06-21
Rated 4 out of 5 by from Great nail gun for the price Had a freeman 16 ga nAiler for two years and was very happy. Few jams and easy to clear them out. 16 ga is stronger than many others. I use 2 in and 1 1/4 regularly. Very happy with it.
Date published: 2017-01-10
Rated 5 out of 5 by from Good tool. Great price. Purchased as a gift. Great warranty, too! Good tool. Great price. Purchased as a gift. Great warranty, too!
Date published: 2016-12-21
Rated 5 out of 5 by from Great first nailer Works as advertised, 7 yr warranty, includes oil, and they even included safety glasses. For the price paid this is a really great finish nailer. i've only had one jam in hundreds of pulls, and i'm sure it was something i did wrong.
Date published: 2012-04-24
Rated 4 out of 5 by from Worth the price Purchased for $69.99 + tax online. Used nailer with SS 2-1/2" nails on cement fiber 3/4" trim boards. Satisfied with results. Would buy again for this purpose. Easy to hold up and use all day long. On short test run seemed to work better putting nails into wood. Will definitely use for crown moulding work. Not sure about standing up to heavy duty usage. Overall good value for the price.
Date published: 2011-09-24
Rated 4 out of 5 by from Pretty good product but buy a nail set for nailing the tongue of hardwood floors. The item worked great on whatever I used it for. It would face nail trim and hardwood floor and set the nail great. The only problem was nailing the tongue of 3/4" oak hardwood. Nearly every nail needed to be set with a nail set.
Date published: 2013-10-01
  • y_2017, m_9, d_21, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_, sid_202072454, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 104ms
  • REVIEWS, PRODUCT