Model # UDS36

Internet #100566670

Store SKU #416252

Store SO SKU #1000668119

Frost King E/O 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors
0077578052434

Frost King

E/O 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors

  • Replacement for Stanley steel door bottoms/Rigid brown PVC
  • Remove the door from its hinges to replace the door bottom
  • Snaps into place easily once the old seal is removed/4 fin design
$8.54 /each

Frequently Bought Together

Product Overview

This 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors snaps into place easily once the old seal is removed. The door bottom features a 4-fin design.

  • Replacement for stanley steel door bottoms
  • Helps save energy
  • Remove the door from its hinges to replace the door bottom
  • Snaps into place easily once the old seal is removed
  • Rigid brown PVC construction for a long life and a tight seal
  • 4 fin design

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

20 Questions45 Answers

Customer Questions & Answers

E/O 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors
E/O 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

can you cut the 36 inch pvc weather strip down to 33 inches or do you need the flat space on each end?

This question is from E/O 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors
Asked by
Read all my Q&A
March 2, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Iowa
Read all my Q&A
October 23, 2016
Answer: 
It's to wide the length is ok!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Boston
Read all my Q&A
November 26, 2015
Answer: 
Yes you can trim it. I cut mine down a couple of inches
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Norwood, MA
Read all my Q&A
Home Improvement Profile: DIYer
September 5, 2014
Answer: 
It can be cut down to 33 inches or whatever length you need. It requires a flat area on each end and you will then need to cut about 1 /12 inches of the 'barbs' that slip into the slots on the bottom of the door from the end where you cut the sweep to size. You'll need a sharp utility knife to cut them off flush to the sweep.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
New Jersey
Read all my Q&A
March 3, 2014
Answer: 
It can be cut to shorten if necessary, however, it is possible that if this is being used for a more narrow door (33") it could bind against the threshold at either end.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
4 answers

What is the length of the fins? I have bought a similar product in stores but there is still a minute gap...old worn out bottom didn't have a gap...

This question is from E/O 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors
Asked by
Cameron
Twin Falls, ID
January 9, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Norwood, MA
Read all my Q&A
Home Improvement Profile: DIYer
September 5, 2014
Answer: 
The fins are approximately 7/16 of an inch long.
-1point
1out of 3found this answer helpful.
Was this helpful?helpful1unhelpful2

Asked by
Austin, TX
Read all my Q&A
February 22, 2014
Answer: 
I assume you have a 36" door, since the product is a nominal 36" long. I didn't measure the door length precisely since my doors are 32". You, of course, can't make it any longer than it was manufactured. I cut mine to exactly door width to minimize any gaps; you don't want it any longer than the door is wide...having it longer than door width is likely to cause interference with the side seals, and it Read More
I assume you have a 36" door, since the product is a nominal 36" long. I didn't measure the door length precisely since my doors are 32". You, of course, can't make it any longer than it was manufactured. I cut mine to exactly door width to minimize any gaps; you don't want it any longer than the door is wide...having it longer than door width is likely to cause interference with the side seals, and it should compress against the side seals anyway I would not be happy with ANY gap...too many insects outside wanting to get inside. Read Less
-3points
3out of 9found this answer helpful.
Was this helpful?helpful3unhelpful6

Asked by
NJ
Read all my Q&A
January 10, 2013
Answer: 
Fins are 3/8".
+1point
3out of 5found this answer helpful.
Was this helpful?helpful3unhelpful2

January 10, 2013
Answer: 
the fins will cover up to a 1/2" gap under the door.
0points
2out of 4found this answer helpful.
Was this helpful?helpful2unhelpful2
 
3 answers

Is the white foam rod supposed to be removed from the square tube portion of the weather seal?

This question is from E/O 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors
Asked by
Jamestown, NY
Read all my Q&A
July 28, 2016
The house is new to me so when I removed the door and the old seal I found that the square tube part of the seal was half gone and there was no white foam rod in the remaining portion. Because the door closes so hard when compressing the replacement seal on the threshold, I wondered if the white foam rod in the new seal is supposed to be removed. The other possibility as to why the door closes so hard may be that there is a dark brown 1/8" x 1 3/8" x 36" metal strip screwed to the brass threshold. Did that strip come with the pre-hung door or was it added when the weather strip started to fail? Should that strip be removed from the brass threshold or the white foam rod removed from the new weatherseal?
User submitted photo
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Iowa
Read all my Q&A
October 23, 2016
Answer: 
foam can stay in!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Iowa
Read all my Q&A
October 23, 2016
Answer: 
no
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 1, 2016
Answer: 
No, do not take anything off of the door bottom. There is no part of the door bottom meant to be removed. I cannot answer the question about the metal strip, you would need to contact the door manufacturer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
3 answers

which side goes inside, the round or the flange

This question is from E/O 1-3/4 in. x 36 in. Brown PVC Door Bottom Replacement for Stanley Steel Doors
Asked by
lorton, va
Read all my Q&A
September 14, 2015
on a uds 36 which side goes outside, the round seal or the flange?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Iowa
Read all my Q&A
October 23, 2016
Answer: 
inside
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Michigan
Read all my Q&A
December 11, 2015
Answer: 
flange faces on outside and round is inside the house.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1

September 15, 2015
Answer: 
The round seal goes outside.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-30 T22:51:08.245-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100566670, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 109ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.8 out of 5 by 49 reviewers.
Rated 1.0 out of 5.0 by Stanley door stop replacement not able to install. Why are we the only one? All the reviews said how easy it was to snap in. Watched youtube and others. We struggled for over an hour. We have a Stanley metal door from the late 80's and it should have fit but the fins that pop in were slightly too far apart and would not go in. Broke it trying to hammer it in. Put the old one back on the door. Will have to get a real one from a door store. Disappointing as it is now raining and we could not complete the job. October 15, 2016
Rated 1.0 out of 5.0 by Did not last I installed three of these to replace the OEM bottoms that were failing after 13 years of use. Two of three failed after about 1 year where the fins started to tear off. The one that did not fail is on an interior door protected from the elements. I decided to track down the OEM bottoms and install these to replace the failing Frost Kings. I believe the key difference is that the OEM did not manufacture these out of cheap PVC. Save yourself the time and trouble and find quality bottoms elsewhere. May 29, 2016
Rated 5.0 out of 5.0 by Bugs no more I purchased an older home and had the usual inspection. A few days after moving in the bugs moved in with us. Everything that could crawl came in. I called a home pest service. They were all too willing to have me sign an expensive pest control contract. I looked around and the door had torn stripping on the bottom. Looking online, I found the stripping in the right size for the door and it was in stock. I went to the store and within an hour the door and bug problem were over. Very easy to install. January 19, 2016
Rated 2.0 out of 5.0 by Did not last! This replacement bottom did not last very long, in my opinion. I have a 32 inch pre-hung Stanley steel door purchased from Home Depot in 2002. The original lasted about 8 years. I replaced it with after-market universal fits several times. Found this one at HD and gave it a try. I had to trim to size, which wasn't at all difficult with a sharp utility knife. It seemed to fit good with no drag or binding. In other words, it just "touched" the threshold as it should. It only lasted 2 months until one thin sweep came off, followed by another the next week. Then about three weeks later the rounded "outside piece" peeled off. Gotta due it again with el Nino on the way toward my west facing door! January 4, 2016
Rated 1.0 out of 5.0 by Didn't attach at all This was for a home depot door bought without the bottom. The top tabs didn't fit into the grooves and several types of glue wouldn't hold it in place. August 4, 2016
Rated 5.0 out of 5.0 by Door Sweep Replacement Great product, perfect fit for my 1.75" X 36" wide entry door. Although it is listed as a replacement for a Stanley steel door, it worked perfectly with my 6-panel, non-metal "no-name" door. The original sweep that came with my door had deteriorated from the Florida sun. I ordered this one because it had the "bulb" or "tube" construction that fits up against the door stop, like my original sweep, and works well to keep out the critters.The instructions were simple to follow, and the product installed in a matter of minutes. I'm happy! May 31, 2016
Rated 5.0 out of 5.0 by Stanley door bottom gasket (weatherstrip) Perfect replacement. Instructions say to take the door off the hinges but it isn't necessary. All you need is a screw driver to pry the old strip off. May 31, 2016
Rated 3.0 out of 5.0 by Door sweep This was a Stanley replacement part for my door. Fit and mounted properly on the door, but is now difficult to open or close due to Different design of seal. As time goes on it is seating and getting better, but not like original seal was when I bought door. May 10, 2016
  • 2016-10-30 T21:00:43.050-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_49, tr_49
  • loc_en_US, sid_100566670, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms
  • REVIEWS, PRODUCT