0077578020198

Frost King

Model DS7B/25

Internet #100017658

Store SKU #548581

Store SO SKU #1000631407

E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal

$4.25 /each
  • Fills gaps up to 1"/inc. PVC insert ,ext flange for easy install
  • Stays flexible in low temperatures for a tight seal
  • Soft-cell foam enclosed in a tear-resistant cover

Frequently Bought Together

Product Overview

The Thermwell 1 in. x 7 ft. Replacement Foam Kerf. Door Seal features soft-cell foam enclosed by a tear-resistant cover. The replacement seal conforms to irregularities in door fit and finish for a tight seal.

  • Fills gaps up to 1 in.
  • Stays flexible in low temperatures for a tight seal
  • Soft-cell foam enclosed in a tear-resistant cover
  • Includes PVC insert with extended flange for fast and easy kerf insertion

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

13 Questions19 Answers

Customer Questions & Answers

E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
 
3 answers

I also need a wider kerf for 2 sets of old double PEACHTREE doors (LATE 1980'S), is there anyhing available for that?

This question is from E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
Asked by
Richboro Pa
Read all my Q&A
November 4, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Augusta Maine
Read all my Q&A
Home Improvement Profile: DIYer
November 4, 2015
Answer: 
Yes there is a special "spline" that slides onto the edge of the plastic fin that goes into the slot (kerf). I got mine at a local lumber yard / building materials store. It was easy to slip onto the weather stripping, and fit perfectly into the kerf.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
Allentown, PA
Read all my Q&A
November 25, 2013
Answer: 
I had the same issue, an older Peachtree door with the 1/4" kerf. I bought the weatherstripping product for 1/8" kerf doors. I added .175" diameter screen spline cut to the same lengths as the weatherstripping and pressed them into place with the flat side of a 3" flexible putty knife. The screen spline will fit into the recess in the new weatherstripping and compensate for the kerf size difference. Easy Read More
I had the same issue, an older Peachtree door with the 1/4" kerf. I bought the weatherstripping product for 1/8" kerf doors. I added .175" diameter screen spline cut to the same lengths as the weatherstripping and pressed them into place with the flat side of a 3" flexible putty knife. The screen spline will fit into the recess in the new weatherstripping and compensate for the kerf size difference. Easy Peasy, took all of 20 minutes to do the entire door. Nice tight fit and no more drafts! Plus, you can still remove the new weatherstripping for painting if needed because you didn't use any nails, glue or caulk. Read Less
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0

Asked by
New Jersey
Read all my Q&A
November 5, 2013
Answer: 
No, the is nothing available in the store.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
 
2 answers

Will this fit a Feather River door that I purchased at Home Depot approx 10 years ago?

This question is from E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
Asked by
Read all my Q&A
March 14, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

March 15, 2016
Answer: 
Without more information on the door, this question cannot be answered accurately.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

March 15, 2016
Answer: 
The kerf replacement seal should fit this door.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
 
2 answers

I have a wider kerf and couldn't find wider fins to fit

This question is from E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
October 29, 2013
The original foam is around 3/8" wide so this Replacement doesn't hold inside.
Is there another part number with a wider KErf?

So far I made it fit with extra foam tape, but I don't like that it's loose on the side I didn't use foam tape
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Allentown, PA
Read all my Q&A
November 25, 2013
Answer: 
I had the same problem with an older Peachtree door with a 1/4" kerf. I used .175" diameter screen spline cut to the same lengths as the weatherstripping. I worked them into place at the same time using the flat side of a 3" flexible putty knife. The screen spline will fit into the recess in the new weatherstripping. Nice tight seal without drafts. Plus you can remove them if needed to paint. If the kerf Read More
I had the same problem with an older Peachtree door with a 1/4" kerf. I used .175" diameter screen spline cut to the same lengths as the weatherstripping. I worked them into place at the same time using the flat side of a 3" flexible putty knife. The screen spline will fit into the recess in the new weatherstripping. Nice tight seal without drafts. Plus you can remove them if needed to paint. If the kerf in your door stop is wider than 1/4" you can use wider screen spline to get the proper fit. Read Less
+5points
5out of 5found this answer helpful.
Was this helpful?helpful5unhelpful0

Asked by
New Jersey
Read all my Q&A
October 30, 2013
Answer: 
There is not a wider fin available. You could staple the fins into the Kerf or even place a small bead of Silicone to help seat and tighten the fins.
-3points
1out of 5found this answer helpful.
Was this helpful?helpful1unhelpful4
This question is from E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
 
2 answers

So how do I install this into the groove? Do I need a special tool? When I try to just slide it into the groove (kerf), it won't go in easily.

This question is from E/O 1 in. x 7 ft. Brown Replacement Foam Kerf Door Seal
Asked by
notsohandyman
Round Rock, TX
February 19, 2013
I assume once I figure out how to install it, I will slide in and then cut to fit. It looks like it will be easy to install once I figure out the mojo to do it.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Suwanee, GA
Read all my Q&A
Home Improvement Profile: DIYer
July 15, 2016
Answer: 
It should snap in to the groove. You dont need any tool to install this.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Jersey
Read all my Q&A
February 20, 2013
Answer: 
It should fit tightly into groove. Push into place with fingers, no tool required.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
2 »
  • 2016-09-08 T12:07:41.980-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100017658, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.2 out of 5 by 20 reviewers.
Rated 3.0 out of 5.0 by Watch out for bent or warped ones! 3 doors: 2 each for the sides, 1 for the top. I bought 8 - enough for the job. One of them, the plastic spine was bent/warped, and kept popping out of the slot. Went to two nearby HomeDepot's to get replacement, only to find that most of the box were also warped. These are packaged in a tall 6"x6" box, and stacked vertically in the store, which causes the bottoms to bend/warp. The "convenient" opening, about 8" from the bottom, requires that you to further bend each seal to get it out of the box. The dozen or so in one box were all warped. I'll try another HomeDepot soon. August 11, 2016
Rated 2.0 out of 5.0 by Limited for Certain applications These are great for shaded doors, but they will shrink more than 5% on a door exposed to west facing sun. I did not believe it, but several months after installation this shrank 7". It was like someone took a piece out! Both left and right sides. September 6, 2016
Rated 4.0 out of 5.0 by Works well Easy enough to snap right in. I used regular kitchen sheers to cut it to length. Wish HD carried the white color as well. I needed 3 to cover a regular door way. The one you use for the top (roughly 3 feet) ends up with 4 feet of scrap so the best bang for the buck would be to do 2 doors at a minimum so you dont end up throwing away the 4 feet piece. July 15, 2016
Rated 4.0 out of 5.0 by Good Choice Installation easy! Measure, cut and place. Good insulation quality. March 1, 2016
Rated 5.0 out of 5.0 by Door seal Have a puppy that loves to scratch at the door have had to replace many times,this seal works great I can tell the difference when it is leaking and not, installs very easy and works great. August 29, 2014
Rated 1.0 out of 5.0 by Must have been defective or damaged. I bought these to replace old door seals. Apparently the ones I bought were either defective or they had been damaged. The rubber like substance had not been glued adequately to the plastic so when I pushed the plastic into the groove, the rubber like substance did not seed into the groove like it was supposed to. I tried to use hot glue to fix, but was unsuccessful. If you do use these make sure they are glued together properly. They probably will work for you then. October 15, 2015
Rated 4.0 out of 5.0 by Great Product Did the job but was bent in shipping. They needed to shiped in a tube. October 20, 2015
Rated 5.0 out of 5.0 by Put an end to drafty doors The door seal was easy to install and did an excellent job of sealing the door September 22, 2015
  • 2016-09-08 T12:35:47.307-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_20, tr_20
  • loc_en_US, sid_100017658, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT