Rated 4.0 out of 5 by 22
Rated 2.0 out of 5.0 by jb not enough for whole door
This was literally just a 7ft piece. Other comments here said it was enough for a whole door, it's not. I returned. I don't understand why it's so hard to find a roll of this that's enough for a whole door.
August 30, 2016
Rated 5.0 out of 5.0 by Brian Super easy installation and great fit.
I just completed redoing all the seals around every door frame in my house. I'm not a pro by any means but I finished the entire job of 4 doors is just over 1 hour.
August 23, 2016
Rated 5.0 out of 5.0 by HappyCustomer511 What a difference
The seal on our door is now tight. No more cold air or bugs coming in when the door is closed!!!
May 11, 2016
Rated 4.0 out of 5.0 by jblack0819 Door is sealed now
Used this to replace the one where the French-style doors come together. As the dog was growing up, he would scratch on the door (hit the weather stripping instead) to be let in. There was a serious draft. This new Vinyl-clad Foam Kerf door seal works great. Although, I'll have to buy another one by this time next year. The dog is already tearing this one with his claws... Don't mind, the seal was very easy to install and no tools were needed.
March 8, 2016
Rated 1.0 out of 5.0 by Disappointed Cheap garbage
Could not push the fin into the slot completely and was baffled. Then I looked at the weatherstripping and noticed the ridiculously poor quality, sloppy manufacturing. The sticky foam that holds the vinyl cover was protruding and causing the fin to be too thick to push into the slot. I already cut it to size so I'm sure I can't return it. Now I'm on my way to other major competitor in hopes their product has better quality control.
I wish I could post a pic.
February 6, 2016
Rated 5.0 out of 5.0 by Mikey An excellent replacement.
I had recently replaced my workshop door within the past two years and since that time had let my cat stay in there once in awhile when she wanted to. After awhile and much to my horror I found that she was destroying the weatherstrip as she scratched and destroyed part of it when she felt it was time to come out. So now what do I do? Once I figured that the original weather strip was a friction fit and removable the next problem was where do I find a replacement? After a few minutes on the web I found this product at HD and it looked like it might work. I ordered it online and picked it up and went home and installed it. It was perfect and I couldn't be happier and my door was like new again. As a matter of fact I liked it so much I bought two more sets and installed them on the front and back door of my home as they were due for an update from the earlier stick on type foam. The vinyl cladding makes it more durable and it's supple surface made an instant seal to my doors and now I'm set for the next winter season. Thank you Home Depot, thank you Frost King.
May 12, 2015
Rated 5.0 out of 5.0 by Verified Reviewer Seals up quite nice
These worked out well. Surprised and embarrassed that I didn't do this previously. Our dogs have seemed to have torn up the original in the house so I was glad I found these. Even without directions, its pretty easy to put these in. Just reverse everything.
Liked these so much, I'm buying more for another door where the dog has torn up the seals. The originals were black but these are white. I've only see brown as another option but I think I'll be buying white again.
September 23, 2014
Rated 5.0 out of 5.0 by Dale Excellent weatherstripping for new installs too!
This weatherstripping is great for custom/new installs too. Much better than any ready-to-go strips I have seen. The soft foam/vinyl shape easily conforms to door faces. I have put it on 3 doors now and it makes a perfect seal. Use a 1-1/2" x 3/4" wooden strip to hold the weatherstrip and cut a 3/32" groove in the edge - you can do this with a special slotting cutter on a router or with a thin table saw blade - just check for this size - too wide and the barb will not hold well. I put the groove 1/4" from one edge on the 3/4" face. Cut the wood strip to length and install the weatherstrip with the "V" pointing toward the wider part of the grooved edge, trimming with a utility knife or scissors. Install the board/weatherstrip gently against the closed door with the "V" pointing away from the jamb and screw the board to the jamb. Don't over compress the weatherstrip, but make a positive seal. I find it best to start on the lockset/handle side of the door, then do the top and hinge side.
December 20, 2014