Model # G16H

Internet #100141379

Store SKU #518700

Frost King E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal
0077578021041

Frost King

E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal

  • For use on wood doors and garage doors, EDPM Rubber
  • Nail-on rubber seal (nails included),16 ft roll
  • Helps seal out dust,dirt,water,accommodates uneven door bottoms
$13.67 /each

Frequently Bought Together

Product Overview

Use this 2-1/4 in. x 16 ft. Rubber Garage Door Bottom Seal to cushion overhead garage doors while also sealing out drafts, dirt, water and insects. Its unique design is intended to compensate for uneven concrete floors or uneven doors, accommodating a variety of fits. The seal is made for use on wooden doors and double garage doors. Made of EDPM rubber.

  • For use on wood doors and garage doors
  • 16 ft. roll
  • Nail-on rubber seal (nails included)
  • EPDM rubber
  • Helps seal out dust, dirt, water and accommodate uneven door bottoms and concrete

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions7 Answers

Customer Questions & Answers

E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal
E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

will this work on a 1 1/4" thick wooden garage door?

This question is from E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal
Asked by
hjones
Birmingham, AL
May 23, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Florida
Read all my Q&A
August 23, 2016
Answer: 
This should work ideally for your situation. It comes with nails and only needs to be fitted and trimmed accordingly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Jersey
Read all my Q&A
May 28, 2013
Answer: 
Yes it will.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

i have uneven garage floor

This question is from E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal
Asked by
Springfield, MA
Read all my Q&A
November 9, 2015
My garage floor is uneven. settled in middle. Gap between door and floor varies but is as much as 1 7/8 inches. Garage is metal/aluminum. Will this work? If not is there an alternate product?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 10, 2015
Answer: 
I do not know of anything that would fill that large of a gap. Your garage door takes a replacement vinyl strip at the bottom. The product you are referring to, is a nail-on product for wood doors and cannot be attached to aluminum doors.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

how many pieces do I need for my double garage door

This question is from E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal
Asked by
edmonton
Read all my Q&A
September 10, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
New Jersey
Read all my Q&A
September 12, 2014
Answer: 
If you have a 16 ft. door, one piece will be enough.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Will this work on a 2 inch metal door?

This question is from E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal
Asked by
Albany,ore
Read all my Q&A
January 11, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
New Jersey
Read all my Q&A
January 13, 2014
Answer: 
Yes it will, you will either have to screw it on or glue it on.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-10-31 T00:10:54.337-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100141379, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms
  • QUESTIONS, PRODUCT

Customer Reviews

E/O 2-1/4 in. x 16 ft. EDPM Rubber Garage Door Bottom Seal is rated 4.0 out of 5 by 13.
Rated 2 out of 5 by from In a world of 18' garages a 16' seal with instructions to trim to fit seems unfit. And somehow I ... In a world of 18' garages a 16' seal with instructions to trim to fit seems unfit. And somehow I missed that in all the comparisons I did. It is also limp and sagging...unless you stretch it to fit a 18' door, which worked out well so far. Beware, it doesn't extend down far enough for many poorly fitted doors, if your gap is over an inch pick something else.
Date published: 2016-11-01
Rated 5 out of 5 by from Purchased the wrong seal for bottom of my door. This product does in fact nail to the back edge of the garage door. A profile shot may have prevented this products return to the store.
Date published: 2016-08-23
Rated 1 out of 5 by from Cheap Foam, NOT Rubber This product is falsely labeled "Rubber". It is NOT rubber; it is cheap foam. Don't waste your money and time on this.
Date published: 2016-02-25
Rated 5 out of 5 by from Bottom Seal This seal, which is for wood garage doors, was easy to install and came with the necessary nails to attach it to the bottom of the door. All you need is a hammer and a pair of scissors to trim off the excess length when you get it nailed on. The rubber material is flexible enough to make a good seal when the door is closed. Works good, hopefully will last a long time.
Date published: 2011-04-30
Rated 4 out of 5 by from Simple. After realizing the install method was hammer time, takes 15 minutes to cut to size and go across the door. A year later, water only enters garage when door is open. Your only problem should be user error.
Date published: 2013-12-09
Rated 5 out of 5 by from Easy to use Worked perfectly for our situation. Uneven concrete floor but instead of putting on the floor, attached to garage door, as suggested by the clerk at the store.
Date published: 2011-11-08
Rated 4 out of 5 by from easy to install easy to install after removing old seal. would recommend.
Date published: 2016-04-27
Rated 5 out of 5 by from perfect fit perfect fit easy to install , took maybe 15 minutes
Date published: 2015-10-01
  • y_2017, m_1, d_18, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_, sid_100141379, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms
  • REVIEWS, PRODUCT