Model # GR9

Internet #100185922

Store SKU #228614

Store SO SKU #1000094131

Frost King E/O 3 in. x 108 in. Top and Sides Vinyl Garage-Door Weather-Strip
0077578050492

Frost King

E/O 3 in. x 108 in. Top and Sides Vinyl Garage-Door Weather-Strip

  • Use on most garage doors to help seal out drafts,dust,water
  • Compatible with saddle thresholds/9 ft. Length
  • Rigid, vinyl-base section with a flexible, vinyl sweep
$8.47 /piece

Frequently Bought Together

Product Overview

The Thermwell Products 3 in. x 108 in. Dual-Vinyl Garage-Door Weather-Strip Seal features a rigid, vinyl-base section with a flexible, vinyl sweep. The seal is designed to seal out drafts, dust, dirt and water around the sides and tops of garage doors. Proper insulation around the garage door helps turn that space into a work area in the winter.

  • Use on the tops and sides of garage doors to help seal out drafts, dust, dirt and water
  • 9 ft. Length
  • Compatible with saddle thresholds
  • Rigid, vinyl-base section with a flexible, vinyl sweep

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

13 Questions26 Answers

Customer Questions & Answers

E/O 3 in. x 108 in. Top and Sides Vinyl Garage-Door Weather-Strip
E/O 3 in. x 108 in. Top and Sides Vinyl Garage-Door Weather-Strip

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
4 answers

can this b used on wood door not vinyl door

This question is from E/O 3 in. x 108 in. Top and Sides Vinyl Garage-Door Weather-Strip
Asked by
sandee
norway maine
August 27, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Denver CO
Read all my Q&A
Home Improvement Profile: DIYer
July 5, 2016
Answer: 
Yes, either will be OK.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Northern, NJ
Read all my Q&A
Home Improvement Profile: DIYer
April 29, 2015
Answer: 
I used this with a wood door and it worked fine. Holding up great too. No shrinking or cracking like others experienced and it really helped keep the garage warmer as well as the room above the garage.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Eastern Washington state
Read all my Q&A
December 10, 2014
Answer: 
I don't see why not. The rigid part attaches to the molding around your door, while the flexible part just rests against the surface of the door, so I don't think it would matter what your door is made of.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
New Jersey
Read all my Q&A
August 28, 2013
Answer: 
Yes it can be used on a wood Door. The type of Material on the garage door does not matter. This product attaches to the stops around the door not the door itself.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
 
3 answers

can it be attached using a brad nailer?

This question is from E/O 3 in. x 108 in. Top and Sides Vinyl Garage-Door Weather-Strip
Asked by
orlando fl
Read all my Q&A
November 2, 2015
since i will be attaching the weather strip to the 2x6 inner wood frame of the garage, can 2 inch brad nails be used or will it go right through the vinyl?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

January 4, 2016
Answer: 
Yes, an 18 gauge nailer will work fine with 2- 21/2" nails, though you might want to wait until it's warm(ish) outside. This might be cheap PVC which shatters on impact. Test a piece that will be leftover first. Otherwise, 1 1/4" striated nails meant for aluminum coil trim, will work well.
As for the Frost King "expert"-- he should worry himself with making 7' pieces-- the normal size of the side
Read More
Yes, an 18 gauge nailer will work fine with 2- 21/2" nails, though you might want to wait until it's warm(ish) outside. This might be cheap PVC which shatters on impact. Test a piece that will be leftover first. Otherwise, 1 1/4" striated nails meant for aluminum coil trim, will work well.
As for the Frost King "expert"-- he should worry himself with making 7' pieces-- the normal size of the side pieces-- versus wasting our money with 2ft extra and speculating on stuff of which he knows little (like brad nailing).
Read Less
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Northern NJ
Read all my Q&A
Home Improvement Profile: DIYer
December 28, 2015
Answer: 
I attached it using a finish nailer. I think a brad nailer should be fine if you adjust it properly.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

November 3, 2015
Answer: 
It will probably go right thru the vinyl if using a nailer.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
 
3 answers

Can this be painted to match the garage door?

This question is from E/O 3 in. x 108 in. Top and Sides Vinyl Garage-Door Weather-Strip
Asked by
Big Bear Lake, CA
Read all my Q&A
June 1, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Northern, NJ
Read all my Q&A
Home Improvement Profile: DIYer
July 27, 2015
Answer: 
Yes.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

Asked by
Eastern Washington state
Read all my Q&A
December 10, 2014
Answer: 
Yes. I used a stain-blocking oil primer (because that's what I had on hand) and exterior latex paint.
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1

Asked by
New Jersey
Read all my Q&A
June 3, 2014
Answer: 
Yes it can be painted.
+7points
7out of 7found this answer helpful.
Was this helpful?helpful7unhelpful0
 
3 answers

Frost King E/O Dual-vinyl Garage door weather strip. What is the best way to install? Masonry screws or adhesive?

This question is from E/O 3 in. x 108 in. Top and Sides Vinyl Garage-Door Weather-Strip
Asked by
Hank
Bayville, NJ
May 11, 2013
+1point
1out of 1found this question helpful.
Was this helpful?helpful1unhelpful0

Answers (3)

Asked by
Northern, NJ
Read all my Q&A
Home Improvement Profile: DIYer
July 27, 2015
Answer: 
I used regular finish nails since I was attaching it to the wooden door jambs. If you don't have wood and just masonry, since you're asking about masonry screws, then I would recommend using masonry screws. You can also use adhesive but I'd also use some screws too to hold it in place until the adhesive dries. Since the weatherstrip flap is going to be under some tension pressing up against the garage Read More
I used regular finish nails since I was attaching it to the wooden door jambs. If you don't have wood and just masonry, since you're asking about masonry screws, then I would recommend using masonry screws. You can also use adhesive but I'd also use some screws too to hold it in place until the adhesive dries. Since the weatherstrip flap is going to be under some tension pressing up against the garage door the adhesive alone won't hold it in place before it dries. Read Less
+6points
6out of 6found this answer helpful.
Was this helpful?helpful6unhelpful0

Asked by
rosemount
Read all my Q&A
December 23, 2013
Answer: 
Mine came with its own self tapping stainless screws.
+9points
9out of 9found this answer helpful.
Was this helpful?helpful9unhelpful0

Asked by
New Jersey
Read all my Q&A
May 13, 2013
Answer: 
It really depends on the materail you are mounting to. if it's masonary, then use that type of screw. It the material is siding with wood behind use Stainless steel nails (prevents rusting). Adhesive in these situations is not the best material for securely installing the product.
+12points
12out of 12found this answer helpful.
Was this helpful?helpful12unhelpful0
2 »
  • 2016-10-31 T01:37:15.347-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100185922, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 61ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.5 out of 5 by 28 reviewers.
Rated 5.0 out of 5.0 by Frost King Garage Door Weather Stripping This looks just like the Garage Door Weather Stripping that was used on my house originally. And it probably is. I had my house built in 1999. (17 years ago). And the weather stripping is still holding up. The reason that I am replacing it is at the very bottom of both sides, the Vinly that seals the air out has begun to loose its shape and is not tight against the door anymore. (Only the bottom 3"-4"). If that is my only complaint in 17 years, there is no complaint! This product worked great for the 1st 17 years and now that it has been replaced, I am sure that I will get another 17 years. Now... That's a good investment! I highly recommend this product! September 18, 2016
Rated 4.0 out of 5.0 by Garage Door Weather Stripping Found this easy to use and just cut it with a miter saw to the proper length. Much cleaner than nailing the flexible stripping along the door. I wish they would carry this in the store so you did not have to wait on it being shipped. September 20, 2016
Rated 5.0 out of 5.0 by A Good Buy Although it was not a problem using screws to apply this weatherstrip, it did not have holes to indicate where nails/screws were recommended as some videos showed. I would probably have decided myself where to put them anyway. Good product. Does what it was made for. August 11, 2016
Rated 1.0 out of 5.0 by Shrinks, Shrinks, Shrinks The Un-Amazing Disappearing Weather Strip I installed this weatherstrip prior to having my house painted so everything would get painted at the same time. Less than a week later it had shrunk and curled on the bottom so I cut the damaged section out and replaced it with a new piece of the proper length that I had left over. That lasted about another week before shrinking another inch at the bottom and slightly less at the top. It appears the sun affects it as the side of the door that is shaded had less shrinkage. This was temps in the 90's at most. I can't imagine what it would have done in the summer heat in 110's plus. This was a complete waste of time and effort to install as it had to be removed and returned for a refund. November 11, 2014
Rated 4.0 out of 5.0 by Easy install This was the best product I could find to weather strip my garage door without using a shop to install. Installation was easy. June 14, 2016
Rated 5.0 out of 5.0 by Vinyl Garage -Door Weather Strip It sealed my garage doors perfect.I can't see the sun light around the garage doors after I installed the weather stripping. June 7, 2016
Rated 5.0 out of 5.0 by Easy Home Improvement Project! The weather stripping around our garage was yellowed and cracked. The door are oversize, so it was hard to find weather stripping long enough that it didn't have to be pieced. I found just the right thing on HomeDepot.com. My teenage sons were able to take down the old and put up the new. It looks great, and was a valuable learning experience for my boys! September 8, 2014
Rated 4.0 out of 5.0 by good product It cut easily and smooth on my miter saw... being ever so careful not to get sawdust in my Budweiser. It sealed my garage doors up tighter than a frogs butt and I reckon it'll probably pay for its self in 50 years. March 15, 2016
  • 2016-10-31 T00:04:17.204-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_28, tr_28
  • loc_en_US, sid_100185922, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT