Model # VA38W

Internet #204737192

Store SKU #1000029715

Frost King E/O Aluminum/Kerfs Door Set in White

Frost King

E/O Aluminum/Kerfs Door Set in White

$2371 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Install the Thermwell Products/Frost King Kerfs Seal, 3 Piece White Aluminum Door Stop Set on a Standard 36 in. entry door. It helps keep out cold, dust, dirt and rain. The door Stop set includes two 7 ft. pieces and one 3 ft. piece.

  • Fits a standard 36 in. entry door
  • Includes two 7 ft. pieces and one 3 ft. piece
  • Heavy gauge extruded-aluminum construction holds up to tough wear and tear
  • Kerfs material forms a tight seal against cold, dust, dirt and rain to help save energy
  • Vinyl covered foam provides excellent insulation in cold temperatures
  • White finish offers a clean look




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

What is the maximum width gap this can seal?

The door I need to seal has a gap up to 1" between door and frame. Will this product span the gap?
Asked by: Sydney
Suggest that you glue and nail a 1x? (actual 3/4" thick) product to the door frame to close the gap then use weather stripping to close the rest of the gap.
Answered by: Craig
Date published: 2017-01-31

Does this screw into the jamb and does it replace the door stop?

Asked by: Lee1957
This product is not meant to replace the door jamb. It screws onto the jamb and against the door to create a weather seal.
Answered by: WeatherstripExpert
Date published: 2016-12-31

Do you have a video to install?

Asked by: Jimmy
There is a video for installing Door Sets which will be the same as the door set with kerf.
Answered by: WeatherstripExpert
Date published: 2017-01-08

does this come in Brown

Asked by: al
The store should have this product in brown.
Answered by: WeatherstripExpert
Date published: 2016-01-26
  • y_2017, m_7, d_19, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_204737192, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms

Customer Reviews

E/O Aluminum/Kerfs Door Set in White is rated 4.0 out of 5 by 3.
Rated 3 out of 5 by from Frost King E/O Aluminum/Kerfs door set Frost King Door Weather-stripping I purchased the Frost King E/O Aluminum/Kerfs door set at Home Depot. I called the manufacturer and was told this product only comes in the color white. I think HD has an exclusive contract with Frost King on this product. I could not find it available from any other seller. I am a retired Mechanical Engineer and experienced handyman. I found the installation of this product to be time consuming and somewhat frustrating to achieve an airtight fit. The painted extrusion is not designed properly to keep the foam insert in proper alignment when compressed against the door jamb. If you compare this product in the store with the Frost King pine-wood unpainted product, you will notice that the foam strip is the same for both, but the product with the wood molding aligns the foam strip much better. The wood molding requires painting and the mounting holes are not pre-drilled. The wood molding may be a better option for some applications. Also, when you examine this product at the store, you will notice that the white vinyl covered foam rubber insert doesn’t exactly match the painted aluminum extrusion. The extrusion color looks more like a high gloss light gray and the paint is very hard and glossy. If you plan to repaint the extrusion to match the door jamb, you will need to first separate the foam strip from the extrusion, sand the extrusion to dull the surface, paint the extrusion and then re-attach the foam strip. HD does sell brown and white vinyl covered replacement inserts that will fit the extrusion or wood molding applications. I improved the alignment problem by purchasing two - 10 foot lengths of 1 ¼ inch diameter PVC pipe. I pushed all three pieces of the weather-stripping separately into the PVC pipe and left them in there for one week to compress the foam into a better aligned shape. After a week I pulled the strips out of the PVC pipes, cut and attached all sections to the door jam. I found it best to discard the small diameter screws supplied in the package as several heads broke off when I tried to screw them into the pine door jamb (even after drilling pilot holes). I replaced them with #8 - ¾ inch long Stainless Steel sheet metal screws. ................................................................................................................................................ I used the following installation procedure to get a tight weather proof seal: Cut the extrusion sections to fit together snugly at the corners and fit well against the threshold with minimum gaps. Use the pre punched slots in the extrusions as a template to drill 3/32 inch diameter pilot holes into the door jamb, one to align with every slot. Attach extrusions with the #8 – ¾ inch Stainless Steel screws and tighten them in place. Close the door and insure that there are no gaps between the door and the jamb. Insert a credit card between the door and jamb and slide it all around the perimeter of the door to check for a snug fit. Adjust the weather strip closer to the door at any point where you feel excessive gap. After the extrusions are aligned and secured in place and everything fits properly, mark a pencil line around the edge of the extrusions. Back off all screws about 3/8th of an inch, gently pry all three extrusions away from the door jamb, apply a bead of Alex Plus paintable caulk between the jamb and metal extrusions, and re-tighten all extrusions in place making sure all of them are in line with the pencil line. Immediately clean off all excess caulk. To make the door jamb blend in better with the weather stripping - Mask off the extrusion and paint the door jamb the same off white color as the extrusion. The weather-stripping will be less noticeable when the door is closed. Keep in mind that you can rarely achieve a perfect air-tight seal on an old entrance door as good as that on your refrigerator door. After installing the three piece weather stripping, you may still have leaks around the bottom of the door and threshold areas. Sealing those bottom leaks can be very time consuming, expensive and frustrating. And, your language may not be appropriate for young children. By putting in the extra time, creativity and attention to detail, my end result was satisfactory in appearance and function for my entrance door. In the future I would only use the extrusion weather stripping around a door where appearance was not important and where no painting was needed. I would use the wood molding type product for all other applications, and paint it.
Date published: 2016-04-08
Rated 4 out of 5 by from Absolutely a great product, but the instructions are atrocious It took me over two hours to install this when it should have taken 30 minutes. The instructions are completely worthless. There website was so worthless I had to go to another vendor's site to be able to install this.
Date published: 2017-01-07
Rated 5 out of 5 by from does the job after years of using so many different products, this one is the clear winner. seals great looks good
Date published: 2015-10-28
  • y_2017, m_7, d_19, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_, sid_204737192, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms