Model # TGN3324

Internet #100674079

GE 200 Amp 240-Volt Non-Fuse Indoor Safety Switch
0783164008845

GE

200 Amp 240-Volt Non-Fuse Indoor Safety Switch

  • Highly visible ON/OFF label and easy to grip red handle
  • Unobstructed gutter and self-leveling, 3-point mounting system
  • Integral cover interlock for added protection
$183.00 /each

Frequently Bought Together

Product Overview

The GE 200 Amp 240-Volt Non-Fuse Indoor Safety Switch meets NEMA standards. This unit is intended for use as a safety switch in residential- or light commercial applications where the duty level is not severe and can be used as service entrance equipment when installed in accordance with the NEC. This single-phase switch features direct-drive, quick-make, quick-break mechanisms for a long life.

  • For use as a safety switch in residential- or light commercial applications where the duty level is not severe
  • Suitable for use as service entrance equipment when installed in accordance with the NEC
  • Metallic case for durability
  • Can be padlocked for added security
  • Direct-drive, quick-make, quick-break mechanisms for a long life
  • Spring-reinforced fuse clips help provide reliable contacts and cool operation
  • Non-fused
  • Single phase
  • 3 poles
  • 240-Volt
  • For indoor use
  • Meets NEMA standards
  • ANSI certified and CSA and UL listed
  • Removable interior and Amp le space simplify installation and wiring
  • Straight-through wiring and multiple knockouts speed installation



  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Connect to a 200 AMP Panel

I bought it and intend to use it as a disconnect at the service entrance. Can I use a Southwire 4/0-4/0-4/0-2/0 Aluminum SER Service Entrance Cable to connect this safty switch to the 200 AMP main panel about 20 feet away?
Asked by: ToPanel
Yes, you can use 4/0 SER to connect from the panel to the switch, as it is rated for 200 amps. For any further questions regarding installing your new safety switch, I'd recommend to consult a licensed electrician in your area. Joseph
Answered by: JosephHDATL
Date published: 2015-11-07

hi, i need lugs that fit 350mcm , can lugs be bolted on ?

i have up sized my wire do to a long distance run
Asked by: Anonymous
Shockme, No, unfortunately you would have to go up to a 400A safety switch to accommodate 350MCM. Thanks for your inquiry about this product, THD Customer Service
Answered by: Anonymous
Date published: 2015-09-17

Do you carry it in a 3 Pole?

Asked by: Anonymous
Hi Kyle, Thank you for your question. This unit does have 3 poles but can be used as a 2 pole as well... Hope this helps.
Answered by: Sushma
Date published: 2015-11-04

Can I use this to switch between a generator and the grid?

Asked by: eric
  • y_2017, m_4, d_24, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_100674079, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 92ms
  • QUESTIONS, PRODUCT

Customer Reviews

200 Amp 240-Volt Non-Fuse Indoor Safety Switch is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Great product This switch was easy to install,had plenty of working room and good knockout locations
Date published: 2013-06-27
Rated 5 out of 5 by from Excellent 200 AMP Disconnect Switch This switch is NEMA rated for indoor applications. I am using this switch inside a generator room to switch my generator into the home. Safety wise, I would rather operate a switch handle rather than flipping a 200 amp switch with my fingers. CBs should never be arc'ed. The blades in this switch are spring loaded to open and close quickly, thus minimizing an arc. There are three switch contactors (polls) in this device, thus N (neutral), P1 (phase), and P2 (phase). The box is ample size for wire placement. The box has cutouts on all four sides.
Date published: 2013-11-05
  • y_2017, m_4, d_23, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_, sid_100674079, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 83ms
  • REVIEWS, PRODUCT