Rated 4.5 out of 5 by 650
Rated 3.0 out of 5.0 by SS Did Not Meet Expectations for the Brand and Price
The original installation went well, but the washer was not leveled properly. The company who installed the washer needed to return. Stated that the washer was level, but the washer was still very noisy during the spin cycle and when the washer drained. Needed to set up ANOTHER service call with a GE technician. The GE technician had to level the washer (apparently it was not level the first two times) and checked all other parts. The washer is still very noisy when it's draining, but the GE technician said that it was normal for this particular brand of washer. The spin cycle is still somewhat loud depending on the type of load that is being washed.
May 17, 2016
Rated 5.0 out of 5.0 by Dako Had for about two years now
I have been meaning to come back on the HD site to write a review. Usually never do unless I am truly impressed with a product. It has to perform. I am very impressed with this unit. So little water is used you wonder how it can wash your clothes, sheets, blankets etc. but it does. No mechanical problems with it at all. I would rather buy a GE than a foreign job (even if most of it is probably sourced outside the US), but was a little worried about quality. This washer exceeded my expectations.
May 31, 2016
Rated 2.0 out of 5.0 by Barbara Loudest washer I've ever had
My home warranty company offered us this washer when our previous one wasn't worth fixing. We were very excited about it until we ran it. When it is on the spin cycle it sounds like a runaway train. We have only had it 4 months. We had it leveled and it didn't make much difference. The level says it is fine so that is not the problem. Not too happy that we have to close the door whenever the washer is running.
June 7, 2016
Rated 1.0 out of 5.0 by Prof Horrible Design on Spider
Although we needed a stackable pair washer and dryer because of space, and we had trusted the GE name, it turned out that all front loaders have a spindle and spider to support the drum. That spindle and spider is in chlorinated, soapy, chemical rich water at least half of the time. If a load gets out of balance, then it also is aided by gravity and cracks the spindle (since it was aluminum and corroded by the chemically treated water is substantially weakened). GE ONLY SELLS replacement spindles and drums. This cost me $800 to repair, less than 4 years after purchase. They could have stamped the spindle out of stainless like the drum!!!! Inexcusable, but from a profit and repair point of view, double the cost to the homeowner.
April 4, 2016
Rated 1.0 out of 5.0 by jkinsf Grade: F
This washer worked ok for about four months before breaking down. First they thought it was a pressure switch and then a control board. Both parts were replaced but neither made it work again. We are now three weeks without a working machine. GE support is understaffed, but at least helpful. Home Depot "service" is laughable. Its all outsourced with no home depot representative willing to take proper responsibilty. Questioning the decision to buy from home depot and not a more dedicated appliance store.
March 3, 2016
Rated 3.0 out of 5.0 by Dsolrac Noisy
It sounds noisier than my previous GE front loader. It's noisy even when it is filling with water.
March 24, 2016
Rated 1.0 out of 5.0 by MHSFBay Absolute failure Out of the Box
Our machine failed right out of the box-- It squeels, it shakes, it makes an approximate 150 decibel mechanical noise from first start up. The parts are not available (of course) and it may be a month to repair-- since the parts are ordered and a repair is scheduled for the second visit ( since the first visit was , yep! it's broken .. I'l be back in 2-weeks), I am sorry to have bought it.
Then-- It requires a stacking kit that the sales person lectured us about for 10-minutes and then forgot to add to the order, which took an additional 10--days to get.
It is a sad tale.
December 23, 2015
Rated 5.0 out of 5.0 by John Great product, smart design and energy saving
I bought this GE washer to replace Samsung washer. I bought Samsung washer 4 years ago. Then spider hold the drum to motor was broken. It costs at least $800 to repair since it has to be took all parts off. Even you can do yourself, it doesn't deserve to repair since it would broken next 3~5 years. Suppose Samsung should redesign the spider to pass the durability test(I don't know if they test it. They might just copy competitor's designs). However the part is discontinued. After install new GE washer, my Samsung's dryer didn't run. Samsung is new company in appliance, has no experience, bad design and services. I wouldn't buy south Korean products any more(I had troubles with their TV, dishwasher too).
Let talk about GE. 1. convenience, door is bigger for same size of washer so it is easy to put in and take out. 2. Excellence design. a) it uses high speed spin during rinse. Rinse is more efficiency. b) After spin, all clothes are loose other than stick on drum like Samsung's. c) All processes during washes take less time in between. 3. Energy efficiency. One I could measure is less dry time. Since GE use high speed spin(I set up in the second high speed as same as using Samsung's), using same setup for dryer, 20 min less to dry. 4. Easy to maintain and good service. From GE website, you could see problem diagnoses, part assembly. You could do everything for yourself. 5. Price lower. It costs more than $200 less than Samsung bought 4 years ago, Samsung started lower when they came to US market at beginning but it still costs more than $800.
GE is great company and is making great products. I love US designs.
March 22, 2016