Model # WX08X10075DS

Internet #202214660

Store SKU #505199

GE 8 ft. Semi-Rigid Dryer Duct
0084691805830

GE

8 ft. Semi-Rigid Dryer Duct

$9.99 /each

Frequently Bought Together

Product Overview

This 8 ft. Semi-Rigid Dryer Duct is a semi-rigid dryer duct that fits most dryers. This duct is easy to install. It is also includes 2 clamps.

  • Fits most dryers
  • Semi-rigid design
  • 8 ft. for length
  • Includes 2 clamps

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

when putting on the dryer vent hose, it says to make sure the hose isnt smashed or bent,how do we keep from doing that?

i cant figure it out
Asked by: Anonymous
Once installed just be sure to have enough room behind the dryer for the hose and don't shove the machines into it too hard. Also don't store anything like brooms or mops behind your dryer on top of the duct. Other than that its pretty stiff stuff. Depending on the size of your dryer vent and vent line in the wall you may have to "squish" the line with a hose clamp to get it secured. This type of "bending/smashing" is ok at the ends to ensure an airtight connection.
Answered by: Andrew
Date published: 2017-01-11

will this type of semi rigid dryer duct hose catch fire and burn

I heard that some dryer hoses can catch fire if lint in hose gets to hot
Asked by: Rachael
This is metal and won't easily burn. Don't NOT use it inside a finished wall. It's for hooking the dryer to a wall vent, or, a simple, exposed 'up and out' short basement vent. Have someone clean the entire dryer vent yearly, and you won't have any problems.
Answered by: Ward
Date published: 2017-02-07

Will this hose bend 90 degrees?

I need to make a 90 degree bend coming out of the dryer then run up about 4 feet to another 90 degree bend to go out of the house.
Asked by: Jeff
I have mine installed in this exact way. there is a small radius that is needed to make the bend, but it will do it no problem. Installation tip, secure the dryer end firs and set the dryer in place, then run the duct and make your second bend. I didn't do this the first time around and the semi rigid nature of the duct caused it the twist in some interesting ways.
Answered by: Andrew
Date published: 2017-01-10

can this be trimmed to size? (only need 4 feet)

Asked by: kacey
Absolutely
Answered by: Felix
Date published: 2016-08-23
  • y_2017, m_2, d_19, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_202214660, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 57ms
  • QUESTIONS, PRODUCT

Customer Reviews

8 ft. Semi-Rigid Dryer Duct is rated 3.4 out of 5 by 93.
Rated 5 out of 5 by from Upon delivery of the two dryer ducts it was observed that there were the necessary two functional... Upon delivery of the two dryer ducts it was observed that there were the necessary two functional holes in each of them - one in the front and one in the back. The ductwork itself extended to the 8 ft length in the advertised manner. Upon delivery, the product was examined for any additional holes, which would have rendered it unusable. None were found. During installation, both holes at either end of both dryer ducts were successfully intersected in a parallel fashion to holes in other ductwork components. Namely, an intersection was performed with a connector part that attached to the second 8 ft semi-rigid dryer duct (also containing two functional holes), a output port on an electric clothes dryer, and an input port on a vent that led to the exterior of the dwelling. Connections at all points were successfully achieved using the circular brackets that were supplied with the dryer ducts. An integration test was performed using an operational dryer, and no air leakage was observed from any of the components.
Date published: 2016-12-06
Rated 5 out of 5 by from I used this for a bathroom vent. The previous owner had the vent blowing into the fiberglass insu... I used this for a bathroom vent. The previous owner had the vent blowing into the fiberglass insulation. I was able to move the insulation in the ceiling rafter to the side and pushed this ridged duct out to the soffit area to allow venting to outside air. it was stiff enough to not bend easy. It will also be better for dryers than the aluminum foil type. Blowing most hot air into fiberglass insulation could cause bad mildew.
Date published: 2016-12-27
Rated 5 out of 5 by from This is the nicest flexible duct I have ever used. I used it for a bathroom exhaust fan duct in ... This is the nicest flexible duct I have ever used. I used it for a bathroom exhaust fan duct in a difficult location. It is pretty heavy gauge metal, but expands and bends easily. Be careful not to crush the ends, and keep in mind that once stretched, it does not re-compress. I will soon be using another piece of it for a new dryer installation also
Date published: 2016-12-13
Rated 5 out of 5 by from great product When I purchased this item I really thought it would be to long, I love the way it adjust and stays true to form.. I was able to connect dryer and keep the original layout so no need to remove doors and swap side. Love the rigidness better then the soft flex. A truly remarkable product...
Date published: 2016-09-06
Rated 5 out of 5 by from I liked the screw clamps rather than the old ones that had to be squeezed with a pliers. These w... I liked the screw clamps rather than the old ones that had to be squeezed with a pliers. These were much more secure. The vent material was more rigid and seems like it will last. It was very easy to install once we got the dryer out of the way.
Date published: 2016-12-06
Rated 1 out of 5 by from I had a tight fit area and the duct kept unraveling. cut it try again got a hole in it. If it wi... I had a tight fit area and the duct kept unraveling. cut it try again got a hole in it. If it will never move and fits easy maybe, but for a dryer moving in and out to clean or service, I'm going with flexible. Not a great product.
Date published: 2016-11-08
Rated 2 out of 5 by from dryer duct was hard to work with didn't stretch out easy. got a hole in it easy. at the end of th... dryer duct was hard to work with didn't stretch out easy. got a hole in it easy. at the end of the day it worked but when I replace my dryer I am going to redo the dryer duck with a new one.
Date published: 2016-11-01
Rated 2 out of 5 by from So so item This duct is a pain. If you find the duct made in USA, goes together great, if not made in USA, your going to fight to put it together. I had to bend one of the tabs to make it work.
Date published: 2016-10-04
  • y_2017, m_2, d_15, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_93
  • loc_, sid_202214660, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 65ms
  • REVIEWS, PRODUCT