Model # EVWSWBH-CP02

Internet #204269636

Store SKU #1000012749

GE EV Charger Indoor Level-2 WattStation Wall Mount


EV Charger Indoor Level-2 WattStation Wall Mount

$59900 /each

Frequently Bought Together

Product Overview

The GE WattStation Wall Mount EV charger is suitable for residential indoor locations. The GE WattStation Wall Mount offers Level II charging, which is capable of reducing charge time from 12-18 hours to 4-8 hours, with service needs of 208-240-Volt AC at 30 Amp assuming a 24 kWh battery and a full-cycle charge. GE Watt Station has a wide variety of features that make it reliable and beneficial to users in many different contexts.

  • Designed for a wall mount application
  • 18 ft. cord wraps conveniently around the unit keeping it organized and off of the ground
  • Features a NEMA 1 (indoor) durable non-metallic exterior and is hard wired, this unit does not feature an on/off button, it can only be turned off via the circuit breaker
  • Green backlit charging icon will illuminate to signal that the vehicle is charging and a red backlit icon illuminates to signal a fault has been detected
  • LED light surrounds the connector inlet and will illuminate white when the charging station is powered on
  • 2 piece mounting bracket designed for single personal installation and removal
  • Enclosure lock is featured on the mounting brackets to prevent unwanted removal of the enclosure from the wall
  • Features nuisance tripping avoidance and auto re-closure
  • Contains a vehicle ground monitoring circuit
  • Meets all of the following standards compliances: SAE J1772; NEC 625; UL 2231, 2251, 2594; NEMA and NIST; CUL 2594 and 2231

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Does the GE Residential Electric Vehicle (EV) 30-Amp Level 2 Indoor Watt Station includes a plug?

In the outdoor model it specifcally states that it includes a plug, but the indoor model it does not. I assume it still does because it is part of the picture and it includes the cable, but could you confirm? Model # EVWSWBH-CP02 Internet # 204269636 Store SKU # 1000012749
Asked by: Anonymous
The CP02 Model is hardwired, the CP01 has a plug, not sure of the NEMA # but I assume a 6-50P would work.
Answered by: kurt
Date published: 2016-04-07

What size wire is needed

What size wire is needed to connect to power source?
Asked by: Nick
# 8 Copper, 2 Hots & 1 Ground. If your running it in conduit you can use # 10 wire for the grounding conductor "per code"
Answered by: kurt
Date published: 2016-04-07

Will this use less than 7.2 kW? Thanks.

Asked by: Dawna
If you battery is completely discharged then possibly yes more likely a normal recharge would be 4 to 5000 watts.
Answered by: kurt
Date published: 2016-04-07

Does the hard wired model have the same three year warranty as the model that has a plug?

I don't see any warranty information on the hardwired version, does it have the same three year warranty as the plug in version?
Asked by: cwill
I checked with GE and yes it has the same warranty
Answered by: kurt
Date published: 2016-04-09
  • y_2017, m_6, d_21, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_, sid_204269636, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 30ms

Customer Reviews

EV Charger Indoor Level-2 WattStation Wall Mount is rated 4.8 out of 5 by 16.
Rated 4 out of 5 by from Good but a few minor flaws - Instructions are confusing and inconsistent - On one page it says use a 3/8" bolt and on the other it says 1/4" 1/4" is right. - It says there is a template for mounting included, it is not. - Later it says use the bracket as a template, but this does not help located the power hole. - The specs forgot to mention that it does not have a power off switch. So it's on all the time. - Don't take the plastic off the cover till you are done. I put a little scratch on mine - The power input holes are behind the binding post. That made pulling and routing the power wires a challenge for these heavy gauge wires. - Otherwise works OK so far
Date published: 2013-07-07
Rated 5 out of 5 by from The GE WattStation is built with Industrial Quality I bought my WattStation through, and it was delivered promptly. This product provides the connection point necessary for charging plug-in electric cars, and is fitted with the SAE standard J1772 car interface plug, on a long cable that is very conveniently flexible. When connected, the WattStation communicates with the car and ensures that the car is ready to receive a charge, and, importantly, that there is no circuit fault or other problem. Only then does the WattStation send power over the cable into the car. This is a "Level 2" system, which means that it will provide charging current of up to 30 amperes. At 240 volts, this delivers power to the charger in the car at a rate of up to 7200 Watts. At this level, a car will charge twice as quickly as with the Level 1 (120-volt) system usually delivered with plug-in cars. The physical form is stylish and is designed to provide a place for neatly looping the long, heavy cable around the housing when not in use. Internally, the components of the WattStation are robust, industrial grade. Mounting is simplified by an included steel plate which is first attached to the wall. The unit is then slipped into position and secured in place with a key lock. It will not easily be stolen or moved around, even if mounted outdoors. Two models are available. One model comes with a short AC able and plug already installed for use with a NEMA 6-50R 240-volt receptacle. The other model is intended for direct connection into house wiring, although it can also be fitted with a 10-gauge service cable and suitable connector for your available 240-volt AC receptacle. The WattStation is no lightweight, at about 30 pounds, but is sturdily constructed and appears capable of many years of reliable service.
Date published: 2013-09-18
Rated 5 out of 5 by from Works great for the Volt -- maximizes EV miles I was able to utilize our electric utility's rebate program to cover the cost of the unit and installation, so price was not a big factor. That said, this seems to be the best value out there, especially with it being UL listed. There are other options for less money, but most others are not UL listed. Works great for my Volt. Plug the car in right after work, and I'm able to use EV range again in the evening if I need to go out again. Looks nice on the wall too.
Date published: 2014-01-02
Rated 5 out of 5 by from Fast Shipping, Works Great! My WattStation arrived in only 2 business days! I installed it very easily with help from another person. The key at the bottom is a little tricky, but you'll need to insert the key and unlock the lock and then lift the unit into the mounting bracket with the key in. The key barely fits through the hole inthe bracket, but there is no other way. Once the key is through, the unit will seat properly and you can lock it and remove the key. The LED light is on constantly and is very bright. It lights up my whole garage, but I don't mind it. If it annoys you, it can be disconnected very easily inside the unit by detaching a small clip. When you plug it into your EV, a few seconds later, you'll here a relay pop over, then the quiet hum of a transformer as the car charges. Its nice, b/c you know its working.
Date published: 2013-12-10
Rated 5 out of 5 by from Works perfect for the Fords! Cmax Energi charges in about 2hrs. Ok I bought this one on sale for 2 reasons. 1st is because it comes with a 3 year warranty and all my EV customers talked great things. However this one was less money then the other GE. This charge center has no on and off button and is indoors only. The other GE charge center that is $849 is weather proof and and has a on and off button. However this one shuts off as soon as the reaches full charge. The car actually controls it so I don't think a physical power button is needed. Great unit and great rebate.
Date published: 2013-11-13
Rated 5 out of 5 by from Good charger, works great Great charger. We love how it charges our Volt in 4 hours compared to 10 hours with the 110 charger included with the car. I almost didn't buy the charger due to reviews saying the charger was very loud when the contactors switched on and off but our charger is very quiet. I saved some money by buying the hard wired version which was on sale for way less money than the plug version and had my electrician create a cord and plug for me.
Date published: 2013-11-08
Rated 5 out of 5 by from Works great . Works great charging my volt. Much faster than 120 v charging.
Date published: 2014-06-24
Rated 4 out of 5 by from Works as advertized and looks good Should have the power on-off button like the outdoor model. Everything is already on the control board, only the front panel button is missing. Wall mounting can be troublesome because there is only one access hole for the power cable. Thus there is a 50/50 chance it will be on the wrong side of the stud you are mounting the unit on. This means you've got to notch the wall board and stud to get the cable on the opposite side.
Date published: 2013-10-22
  • y_2017, m_6, d_21, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_, sid_204269636, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 27ms