Model # WB2X9154

Internet #100659864

GE Oven Igniter for Gas Ranges
0084691791058

GE

Oven Igniter for Gas Ranges

$51.12 /each

Frequently Bought Together

Product Overview

Replaces all round style (Carborundum) oven igniters. It includes two high temp wire nuts. It does not replace flat style igniters. The dark grey coil is very fragile, so handle with care.

  • Genuine GE part
  • Includes wire nut
  • Each gas range needs two of these to operate properly
  • Replaces GR403

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Is this part available in the store

Asked by: Miia
No.
Answered by: Jefree
Date published: 2016-11-23

des this oven ignitor work for GE model GBP90MEB5BC?

Asked by: Anonymous
This works for our 2007 GE Gas Range -- model #JGBP33DEM1BB. Before purchasing the replacement oven igniter, we checked with Home Depot and found one that was 'universal' or similar enough to the expired oven igniter, to fit our gas range.
Answered by: ExplorerMum
Date published: 2015-11-06

GE gas range -high output burner ignition unserviceable.

My GE gas range -XL44; Model # JGBP35GEP6WG; Serial # TL258359P-; Spark Module Model # 6544G1001A, 120 v. AC 60 HZ. has suffered from ignition did not work on the R/H fwd- high output burner, with cross check from other lead, electrode proved functioning good, any comment on this problem?
Asked by: Anonymous
If you have a round ignitor for GE XL44 oven, this is my fresh experience from today: It was not hard but not as easy as some websites and U-Tube videos claim. Some said that it takes only one screw to disconnect a burner and then lift a shelf/cover, but there was more to it. I am not a tech. or really handy, but it took me some 1/2 hr. to replace it. That's how I did it (please do not ask for more details): 1. UNPLUG THE OVEN AND SHUT THE GAS. 2. Shut the gas valve on the pipe (on the same wall as outlet). 3. Remove the door by opening it some 30 degrees and pulling/lifting it up. 4. Remove the screw holding the closer end of the burner (tube). 5. Remove screws holding the cover under the burner (on the sides - just carefully find them all). There are also a couple hand crews in the back. Lift the back of the cover, then pull it out (figure it out). 6. Remove the heat shield (a layered and hollow plate under the cover). You may do w/o removing it, but I did remove it - more freedom of movement. 7. Remove 2 screws holding the back end of the burner to the back wall of the oven. 8. Disconnect 2 ignitor wires (do not let them drop inside the back oven wall - somehow clamp/hold them). 9. Pull out the burner. 10. Remove the old ignitor (2 screws) from the burner and install the new one in its place. 11. Re-install the burner with new ignitor back the same way it was there. 12. Reconnect the wires. You may have to strip them and securely connect with ceramic heat resistant wire nuts (insulate). 13. Plug electricity and turn on gas. 14. Turn on the oven and check/try if it ignites. 15. UNPLUG THE OVEN AND SHUT THE GAS AGAIN. 15. Re-install all shelves back the same way. 16. Plug the power and turn on the gas. DOUBLE-CHECK EVERYTHING. Start. No claims, please. I just shared my experience. Good luck.
Answered by: Oleg
Date published: 2015-11-08

Will this part work for a Hotpoint oven - model # RGB745WEH6WW?

Will this part work for a Hotpoint oven - model # RGB745WEH6WW?
Asked by: Chucky1
No, this part will not work for Hotpoint oven.
Answered by: CommunityAnswer
Date published: 2017-03-15
  • y_2017, m_3, d_21, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_80
  • loc_, sid_100659864, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms
  • QUESTIONS, PRODUCT

Customer Reviews

Oven Igniter for Gas Ranges is rated 4.6 out of 5 by 40.
Rated 1 out of 5 by from This product did not work in my GE Profile gas oven. Apparently, this part does not draw enough a... This product did not work in my GE Profile gas oven. Apparently, this part does not draw enough amperage to activate gas flow in my stove. I obtained the correct part from another source and it worked perfectly. It would be helpful if Home Depot would list the models that the part will work for. It installed OK and lit up OK, but the oven would only light very slowly, took a long time to reach temperature, and would not maintain temperature. The part is probably fine for the right stove, but was a waste of time and money for my stove (model #JGBP79WEB6WW).
Date published: 2016-12-17
Rated 4 out of 5 by from I had to look at a number of you tube videos to actually figure out how to install this part and... I had to look at a number of you tube videos to actually figure out how to install this part and then compiled them all to figure out how to do it. With the replacement part wires the way that they are and no clips like the original, you need to be careful with the amount of wire you leave when you cut the old wires. There are no instructions about what the right length is. I guessed right but could have easily messed this up. Otherwise the igniter works well and the stove is up and running again.
Date published: 2017-02-07
Rated 5 out of 5 by from On the Cheap This item shipped and arrived in a reasonable amount of time. It was easy to install. Once I turned the gas supply back on to the oven, it kicked right on within a few seconds and I have a working oven again for less than a service call with no repair would cost. This was a gamble as I did not diagnose the root cause due to needing to buy more equipment and spend more time in order to do that.
Date published: 2016-10-12
Rated 5 out of 5 by from The GE Gas Oven Igniter was delivered quicker than expected. It was packed securely in bubble wra... The GE Gas Oven Igniter was delivered quicker than expected. It was packed securely in bubble wrap, included everything shown in the picture with the instructions, which helped. The oven finally works again, after a long wait and being disappointed with ordering from Sears Marketplace vendor. Thank-you Home Depot.
Date published: 2017-03-08
Rated 5 out of 5 by from Ignighter This product was GE genuine replacement product, but more importantly being that it is such a fragile part it was packed for shipping very well and received in good shape.
Date published: 2016-11-23
Rated 5 out of 5 by from Home Depot I was very pleased with the product I received. It came as scheduled, it was what I ordered and I would order online from Home Depot anytime.
Date published: 2016-12-20
Rated 5 out of 5 by from It was the part that I needed, it matched the old part and was easy to put in. If I need any fut... It was the part that I needed, it matched the old part and was easy to put in. If I need any future parts I will go to Home depot first
Date published: 2017-03-01
Rated 5 out of 5 by from Fast and perfect The part was exactly right for our wall oven and was super easy to install. I'm so glad we didn't pay a repairman.
Date published: 2016-12-13
  • y_2017, m_3, d_20, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_40
  • loc_, sid_100659864, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • REVIEWS, PRODUCT