Model # IM6

Internet #100025255

GE PVC Ice Maker Kit
0084691078746

Discontinued GE

PVC Ice Maker Kit

Frequently Bought Together

Product Overview

GE IM6 ice maker uses an electric motor, an electronically operated water valve, and an electrical heating unit. Hooks up to the plumbing line in your house to provide fresh water for ice cubes. The water-fill valve supplies household water to the ice maker. Comes complete with ice maker, bucket, and valve. Equipped with a new plastic feeler arm. This kit replaces the IM-1, IM-2, IM-3, IM-4, IM4A, IM5, IM5SS, UKKIT1, UKKIT2, UKKIT4, UKKIT5, WR30X318, WR30X10012 and WR30X10014. This kit will replace some applications of the WR30X0253, which is the old style round cube ice maker. It will replace applications where the ice maker is mounted on the left wall of the freezer. The ice maker produces crescent cubes.

  • Can be installed in most side-by-side, bottom mount and top freezer refrigerators
  • Electronic control board
  • On/Off slide switch to stop cube production
  • Water level adjustment screw to regulate cube size
  • Anti-jamming feature that causes jammed cubes to melt away

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

121 Questions140 Answers

Customer Questions & Answers

PVC Ice Maker Kit
PVC Ice Maker Kit

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from PVC Ice Maker Kit
 
3 answers

will this unit work on a Hotpoint model WR30X0318 Model can 5

This question is from PVC Ice Maker Kit
Asked by
charles
San francisco
July 17, 2012
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
charles
July 21, 2012
Answer: 
the model of the refigirator is CSX 25 GR
thanks
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
CHARLES
SAN FRANCISCO
July 18, 2012
Answer: 
hi Donna thanks for the answer,
the model is DR. NO. 470269G37 wr 30x0318 model can 5. WR30X0318
115V, 60HZ,1.6AMPS/100V 50 HZ - SA 9200 LR94540.
THESE ELEMENTS ARE IN THE ICE MAKER - FOR THE FREEZER : HOT POINT 1997 .
I hope I helped you .
thanks
Charles
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
July 18, 2012
Answer: 
Hello Charles,
This is Donna with GE and I am happy to assist you with your question on the GE icemaker kit IM6.
I will need the model number of the refrigerator to determine if the IM6 is compatible.
Please contact us again with this information and we will be glad to help!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from PVC Ice Maker Kit
 
2 answers

I have a GE side by side Model wr30x0327, is this a replacement?

This question is from PVC Ice Maker Kit
Asked by
Grafton, WI
Read all my Q&A
August 24, 2014
There seems to be many extra parts that look like they come with the product, why all the parts? I want to make it simple as possible to replace the broken unit.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Bridge City, TX, USA
Read all my Q&A
September 19, 2014
Answer: 
this kit seems to be a one size fits all, but don't worry about it. if you can get it hung, plugged in and water in it. it will make lots of ice. keep the parts like the fill valve and the hoses in case you need parts later.
if your refrig has the two screws on the side and the fill from the back, this unit should fit. GE has been using the same mounting style for 35 years at least. I'm like you, I
Read More
this kit seems to be a one size fits all, but don't worry about it. if you can get it hung, plugged in and water in it. it will make lots of ice. keep the parts like the fill valve and the hoses in case you need parts later.
if your refrig has the two screws on the side and the fill from the back, this unit should fit. GE has been using the same mounting style for 35 years at least. I'm like you, I bought it hoping it would fit my 20 year old refrig and it did. you may have to use the adapter plug and then kinda fold it up behind the icemaker like I did before you secure it.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
August 25, 2014
Answer: 
Hello,
This is Michelle with GE and I am happy to help.
This PVC IM6 ice maker kit is designed to be installed in a refrigerator that did not come with an ice-maker but is ice-maker-ready. This IM6 kit provides all the parts needed to install an ice maker for the first time (water valve, plastic fill tube, etc.).
If your refrigerator came from the factory with an ice-maker already installed and a Read More
Hello,
This is Michelle with GE and I am happy to help.
This PVC IM6 ice maker kit is designed to be installed in a refrigerator that did not come with an ice-maker but is ice-maker-ready. This IM6 kit provides all the parts needed to install an ice maker for the first time (water valve, plastic fill tube, etc.).
If your refrigerator came from the factory with an ice-maker already installed and a replacement is needed, only the ice-maker (not a kit) should be ordered. The ice-maker part # WR30X0327 has been superseded to part # WR30X10093.
Thank you for checking. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from PVC Ice Maker Kit
 
2 answers

Why is icemaker slow?

This question is from PVC Ice Maker Kit
Asked by
Tampa, fl
Read all my Q&A
May 12, 2014
Unit has been replaced with a unit the technician says was tested and works fine. Water flow is appropriate and temp is cold enough. I had the old one replaced because of sudden slow ice production, but the replacement seems even slower. Current production rate is 2 cubes in last 3 hrs.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Lebanon, TN, USA
Read all my Q&A
May 14, 2014
Answer: 
Maybe a restricted water flow or possible use of an additional filter. I have no problem with mine and was worried about the same thing. I was pleasantly surprised at the quickness the ice is manufactured.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
May 13, 2014
Answer: 
Hello Caregiver - this is Nancy at GE and I am happy to help you.
Unfortunately, replacing the icemaker will usually not resolve a slow ice situation. If you have a water filter in your refrigerator and it has not been changed lately, then we recommend changing it. Refrigerator water filters should be changed about every six months, depending upon your water quality. Also, you may wish to decrease the Read More
Hello Caregiver - this is Nancy at GE and I am happy to help you.
Unfortunately, replacing the icemaker will usually not resolve a slow ice situation. If you have a water filter in your refrigerator and it has not been changed lately, then we recommend changing it. Refrigerator water filters should be changed about every six months, depending upon your water quality. Also, you may wish to decrease the freezer's temperature by another position to make it colder.
If this does not help, I recommend scheduling a service appointment with a GE authorized technician who can accurately diagnose and repair your appliance. You can schedule an appointment online at:
http://geappliances.com/service_and_support/service/
Or, you may call 1-800-GECares (1-800-432-2737); Monday – Friday: 7 a.m. – 10 p.m. ET;
Saturday – Sunday: 8 a.m. – 6 p.m. ET.
I hope this helps! Thanks for checking with us! Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from PVC Ice Maker Kit
 
2 answers

Will this ice maker work on my Amana bottem mount freezer?

This question is from PVC Ice Maker Kit
Asked by
Trenton, Missouri
Read all my Q&A
April 29, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Lebanon, TN, USA
Read all my Q&A
May 1, 2014
Answer: 
I seriously doubt it because of the construction of bottom mount freezers. I bought this ice maker and am very well pleased but I installed it in a 20 year old GE refrigerator with a top mounted freezer.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Read all my Q&A
April 30, 2014
Answer: 
Hello John,
This is Michelle with GE and I am happy to help.
This PVC Ice Maker Kit is designed for GE branded refrigerators and has not been tested in any other brands. We must recommend checking with the manufacturer of your refrigerator for the approved ice maker kit.
Thank you for checking with us!
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 3 4 5  ... 7 »
  • 2016-10-31 T01:22:01.073-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_100025255, prod, sort_default
2 3 4 5  ... 7 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 167ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 49ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;