Model # THQL2130

Internet #100356511

Store SKU #198153

GE Q-Line 30 Amp 2 in. Double Pole Circuit Breaker


Q-Line 30 Amp 2 in. Double Pole Circuit Breaker

  • Q-line plug-in breaker for residential load centers
  • Internal common trip bar and box type terminals
  • Quick make, quick break switch
$9.78 / each
If you buy 3 or more
$8.40 / each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The GE Q-Line 30 Amp 2 in. Double-Pole Circuit Breaker has a dedicated calibration screw which is cemented to prevent shifting. The attached screw creates a stable calibration for optimum performance. The unit has tin-plated copper stabs to create reliable, permanent and corrosion-resistant connections. The case is made of heat-resistant thermoset for stability and structural integrity.



Product Depth (in.)
Product Height (in.)
Product Width (in.)


Breaker Type
Double Pole
Electrical Product Type
Interruption Type
Standard Trip
Maximum Amperage (amps)
Mounting type
Plug In
Number of Poles
Power Distribution Features
No Additional Features
Product Weight (lb.)
Voltage (volts)

Warranty / Certifications

Certifications and Listings
1-UL Listed
Manufacturer Warranty
Lifetime Warranty

More Products With These Features


Customer Questions & Answers

what is the proper amount of torque for wire connection screw?

I'm adding this breaker to my load center. What is the proper amount of torque for the wire connection screws? I found 1 "not so tight" screw on a 20 AMP breaker causing other problems. "tight" isn't the answer. I'm looking for in/lb or ft/lb. Thanks Joe
Asked by: Joe
The proper torque value is 35 lb-in.
Answered by: TomB2
Date published: 2016-10-25

Is this HACR rated?

HACR rating is required for AC condenser circuit breaker.
Asked by: zoom38
Yes, all listed, modern breakers are HACR rated
Answered by: Maurice
Date published: 2016-10-26

need type tql 40 amp 240volt double pole

Asked by: jake
GE TQL breakers haven't been made for many years and are almost non-existent. The common GE THQL will replace the TQL.
Answered by: TomB2
Date published: 2016-10-25

can I inset a 2/0 AL wire in this breaker

can I inset a 2/0 AL wire in this breaker
Asked by: dawodif
No way!! A 2/0 conductor is much too large to fit the lugs. What is the application? There are ways to protect 2/0 conductors with a 30 amp breaker.
Answered by: TomB2
Date published: 2016-11-01
  • y_2017, m_7, d_19, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_, sid_100356511, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 99ms

Customer Reviews

Q-Line 30 Amp 2 in. Double Pole Circuit Breaker is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Yep. It works See above subject. Item works and is what it is described as
Date published: 2017-01-31
Rated 5 out of 5 by from sweet price! Needed to add breakers to my new panel. These were the ticket!
Date published: 2016-09-06
Rated 5 out of 5 by from Great value Very easy install and it works great so far. I should get years of trouble free use.
Date published: 2012-11-13
Rated 5 out of 5 by from Great buy The 30 amp breaker is of great quality and was for a new 230v compressor and is doing good
Date published: 2015-04-22
Rated 5 out of 5 by from Excellent purchase! The breaker fit exactly as I expected. Great price. Works well.
Date published: 2015-02-26
Rated 5 out of 5 by from Breaker Aging I was about to completely rebuild a 44 year old water heater. It was tripping the breaker about once a week. I figured that the elements had so much sludge on them that they were not necessarily shorting out but just drawing more current. As I researched the water heater, I found that both elements were allowed to be on a the same time -- equating to about 30.5 amps. ...on a 30 amp breaker. Aha! This is an old water heater, salvaged from my first house. I got to thinking, "how come it has been working for 40 years?" So I looked up the current/time trip curve for this breaker. It should be able to carry 31 amps for about 15 minutes! So I decided that the breaker had gotten weaker with age. (They do that when heavily loaded.) When I replaced the old one, I discovered that it was an ITE, which changed to Gould in 1976 and Siemens in 1986! The breaker must have come from the other house as well! No wonder it was weaker! It was also 44 years old! The moral of the story: don't rule out the basics. $9 & 5 minutes vs. $200 & a long hard day vs. $300-$400 + plumber!
Date published: 2015-09-21
  • y_2017, m_7, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_, sid_100356511, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 157ms