GP Canyon Yew 32 sq. ft. MDF Wall Panel-739525 - The Home Depot


Model # 739525

Internet # 202090205

Store SKU # 978696

Canyon Yew 32 sq. ft. MDF Wall Panel

GP Canyon Yew 32 sq. ft. MDF Wall Panel

This item has been discontinued.
The Home Depot no longer carries this specific product.

Was   $19.97
$18.97 / each

Save $1.00 (5%)



Model # 739525

Internet # 202090205

Store SKU # 978696

The Canyon Yew 32 sq. ft. MDF Wall Panel is made of medium-density fiberboard and pre-finished. It is not recommended for ceilings. It offers the traditional appearance of natural wood paneling.

California residents: seeProposition 65 information

  • Made of medium-density fiberboard
  • Traditional design
  • Pre-finished
  • Natural wood pattern


Assembled Depth (in.)  .127 in  Assembled Height (in.)  96 in 
Assembled Width (in.)  48 in  Product Length (in.)  96 
Product Thickness (in.)  .139 in  Product Width (in.)  48 
Ceiling use  No  Color Family  Wood 
Color/Finish  Beige  Moisture Resistant  No 
Paintable/Stainable  No  Paneling/Planking Style  Traditional 
Paneling/Planking Type  Engineered Wood  Prefinished  Yes 
Primed  No  Product Weight (lb.)  17 lb 
Rot Resistant  No 
Warranty / Certifications
Manufacturer Warranty  1 YEAR 


Rated 2.8 out of 5 by 4 reviewers.
Rated 4 out of 5 by Looks Great I had to replace a ceiling that is sloped from 13'4" to 9'4" and really didn't want to use sheetrock again so even though this paneling isn't recommended for ceilings I went with it. I put 5/8" OSB under it and glued it with Liquid Nails Paneling Glue and nailed it with brown stainless steel nails because the cheaper paneling nails usually bend. I ran the paneling sideways so the "planks" look like actual 8" knotty boards going across the ceiling and by staggering the joints I had 2 rows of joints where the 4' ends met so I stained 2- 2x6's to look like beams and ran them up the ceiling. It's been 3 weeks now and the paneling still looks as good as the day I put it up, it hasn't sagged anywhere and the joints are all still tight, I would recommend putting a backerboard under paneling and glue even if you're putting it on a wall. March 20, 2012
Rated 4 out of 5 by Very Pleased Installed in a secondary bathroom over painted drywall with Liquid Nails adhesive from top to botoom and in the middle along with brad nails at the edges. No sagging, bulging, warping or any negative issues. Just don't use in a high traffic area as suraface layer is thin and could tear easily. And hand pick each sheet as quality from sheet to sheet varies. December 27, 2012
Rated 1 out of 5 by Looks good, poor quality I put this up on the wall of a house I was remodeling. I used finishing nails to nail it to the wall. When i returned one week later, the wall had bowed and buckled and was not even remotely smooth. I am not sure what caused this, my guess is humidity or heat because the a/c was turned off in the house. Regardless what caused this, it is unacceptable, and if it was caused by change in temp., a product should be able to withstand temp. change of +-15 degrees. I had to take all of the wall board down and return it. June 11, 2012
Rated 2 out of 5 by Not Impressed bought these panels cause of the reviews i read at other stores,,, they said let set in the room for 3 or more days before installing.... i let set over a week, after have over half of them nailed up ---- most show buckling from top to bottom..... i should have gone with my first idea --- 1/4inch smooth sided flywood... or Luan paneling ..... January 12, 2012
1-4 of 4


Store Exclusive. This item is available for purchase in select stores only.