Model # MSG-301

Internet #202585314

Store SKU #307160

Gardner Bender Low Volt Wire Staple Gun for Heavy Duty and Stainless Steel
0032076075767

Gardner Bender

Low Volt Wire Staple Gun for Heavy Duty and Stainless Steel

$19.97 /each

Frequently Bought Together

Product Overview

Low-Voltage Staple Gun offers heavy-duty stainless steel construction and secures wires up to 1/4 in. in diameter. Gun features a safety handle to ensure staples don't release unintentionally. This stapler gun is designed for use with alarm, speaker, thermostat, A/V and computer network wires. 2 sizes of staples available; 5/32 in. (4 mm) Model #MMS-3101 and 1/4 in. (6 mm) #MMS-3102.

California residents: see   Proposition 65 information

  • Use for stapling low-voltage wiring such as alarm, bell, intercom, security, speaker, thermostat, A/V and computer wires
  • Resists damaging the wires and interfering with the electrical current
  • Heavy-duty stainless steel design
  • Compatible with 5/32 in. MMS-3101 and 1/4 in. MMS-3102 staples
  • Safety handles for compact storage
  • Easy loading
  • Fasten wires up to 1/4 in. of diameter

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

need to replace pusher spring in staple track.

need part number for pusher spring to advance staples.
Asked by: doctor
Contact the company and nicely request a replacement part. Oftentimes, manufacturerers will even forgo shipping/mailing fees when contacted directly when parts are otherwise difficult to locate. Try here with attention toward 'Contact'... http://www.gardnerbender.com/en/products Detail the tool name and model/numbers with a clear explanation of the part needed.
Answered by: Duke
Date published: 2016-01-06
  • y_2017, m_4, d_16, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_202585314, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms
  • QUESTIONS, PRODUCT

Customer Reviews

Low Volt Wire Staple Gun for Heavy Duty and Stainless Steel is rated 3.5 out of 5 by 10.
Rated 5 out of 5 by from Why didn't I buy one of these sooner? Works amazingly well, I've ran about 1,000 staples thru it in less then a week. No foul ups or jams and I haven't stapled through a wire yet with the deep recess in the front it aligns the staple flawlessly .
Date published: 2017-01-03
Rated 4 out of 5 by from Not for tight spots Have to be careful in small areas making sure the staple is going where you want. Haven't used it on hardwood yet but so far no problems driving staples all way in.
Date published: 2016-11-08
Rated 1 out of 5 by from Don't bother Don't buy this unless you are stapling into cardboard.
Date published: 2016-11-08
Rated 1 out of 5 by from Failed after 10 staples Failed in the first day of use. Did 10 staples without a problem. Every staple after that, one leg would go in, the other would double up or splay out to the side.
Date published: 2016-09-26
Rated 5 out of 5 by from best staple gun i ever bought to staple up speaker wire and christmas lights All the other staple guns I have end up not being a wide enough staple.
Date published: 2016-06-28
Rated 5 out of 5 by from Reliable and Tidy Installation of Ethenet Cable This stapler with the 1/4" staples made the job of doing a clean installation of a cat5e along a baseboard and up a plaster wall to extend a LAN connection to another room so much easier. Forget about using nail-on staples or tie-wraps with adhesive anchors which are unsightly and don't anchor well to plaster walls. Once installed, the staple is able to hold the cable in place yet with enough room to slide so there is no danger of damaging the cable. I'm looking forward to using this stapler for other low voltage cable runs in my house and garage.
Date published: 2016-02-06
Rated 5 out of 5 by from Specialty stapler Low voltage wire can often be shorted out to cause disrupted continuity and alot of frustration if fastened with standard staplers clinching the wire's insulation too tightly. This stapler uses shaped staples that cradle the wire without pinching. Garage door openers functioning improperly or intermittently from remote wired buttons can be a cause of pinched low voltage wires due to improper installation. People take shortcuts with the many feet of wire involved with the remote location buttons and safety features. Over the long run, it's worth investing in a proper stapler if hoping to save time and not cause harm to the wiring. This stapler functions flawlessly without jams and I highly recommend it to anyone installing garage door openers, doorbells, Christmas lights(the staples pull out easily with needle nose pliers for removal), and anything else a creative mind can find for the use of the shaped staples. I've even used these, carefully, for holding glass in frames and when fixing the backboards into picture frames by just bending the staple securely. The uses can be many and not limited to just fastening wire low voltage wire.
Date published: 2016-01-06
Rated 1 out of 5 by from Don't Bother I purchased this item to use when running CAT5e cable. It was not used hard or frequently. Had it about 3 months. One day it would not staple. I thought it was out of staples so I decided to reload. To my surprise it was more than half full. After further examination I found out that a piece that holds the spring tight was broken so the staples would not feed to the front. I liked the way the thing worked, when it worked, so I bought another one. This one lasted about 4 months before the same thing happened. I am now stuck with two boxes of staples almost full and no staple gun to use them in.
Date published: 2015-03-17
  • y_2017, m_4, d_16, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_, sid_202585314, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms
  • REVIEWS, PRODUCT