Model # 6378

Internet #203835678

Generac 30-Amp 7500-Watt Indoor Manual Transfer Switch for 10-16 Circuits


30-Amp 7500-Watt Indoor Manual Transfer Switch for 10-16 Circuits

  • Back up hard wired appliances safely and easily
  • Accepts interchangeable breakers including arc fault and GFCI
  • 2-year warranty against mechanical defects
$359.99 /each

Frequently Bought Together

Product Overview

Generac's most versatile transfer switch, model 301060 is designed for 10 circuits, 30-Amp, and generators up to 7,500-Watt. As your family or business needs change, you can expand the number of circuits up to 16 circuits, increasing its range of use. The enclosure can be conveniently flush or surface mounted indoors, and the design accommodates a hardwired or plug-in connection. It incorporates interchangeable type branch circuit breakers make for easy replacement and expansion, allowing your installer to reconfigure the product to suit your needs. Power up essentials like refrigerator/freezer, lights, furnace, kitchen circuits, television, well pump, water heater, home office, garage door opener, and security system. Dual Watt meters are included to help balance loads to prolong generator life. Includes three 15-Amp 1-pole breakers, three 20-Amp 1-pole breakers, one 2-pole 20-Amp breaker and one 2-pole 30-Amp breaker. This transfer switch accepts Arc Fault and GFCI breakers to meet the latest NEC requirement if your installation will be inspected. Installs like a subpanel next to your existing load center a 2-pole 60-Amp breaker must be installed in the existing load center. Easy to use. UL Listed in USA and Canada.

  • Generac's most versatile manual transfer switch for 10-16 circuits, 30-Amp, and generators up to 7,500-Watt
  • Can be flush or surface mounted indoors like a subpanel next to existing load center in a basement, interior room or garage
  • Expandable and reconfigurable to 16 circuits using standard interchangeable type circuit breakers listed with Siemens, square D (HOM), cutler-hammer (BR) and GE (THQL) breakers
  • Accommodates arc fault and GFCI breakers to meet the latest NEC requirements
  • Includes all wires, flexible non-metallic conduit, fittings and wire nuts for installation in about an hour
  • UL listed in US and Canada
  • 2-year warranty against mechanical defects
  • 60-Amp 2-pole main breaker is required in existing load center not included
  • Protected by US patent 6,861,596 B2 and other patents pending




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

any stock??seekonk or close to 02769

6378 trans switch
Asked by: Anonymous
Unless you order directly!!! The only one I could find is the 6-10 circuit unit.
Answered by: Blackfrog74
Date published: 2015-09-17

what is the best transfer switch for XT8000E generac generator

Asked by: goodguy
Generac’s XT8000E portable generator is designed for use either as a portable unit utilizing multiple receptacles, or in conjunction with a manual transfer switch, utilizing the 30 amp receptacle. The manual transfer switch should be sized either based on the largest available receptacle on the generator and the amount of circuits needed to be covered, or can be sized based on your incoming utility, depending on which set up would best meet your needs. To determine the best transfer switch for your needs, we recommend contacting your local certified dealer. Please contact Generac directly at 888-GENERAC (436-3722), for assistance locating a certified dealer closest to you.
Answered by: Generac
Date published: 2015-09-20
  • y_2017, m_2, d_20, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_203835678, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 52ms

Customer Reviews

30-Amp 7500-Watt Indoor Manual Transfer Switch for 10-16 Circuits is rated 4.0 out of 5 by 2.
Rated 4 out of 5 by from Word to the wise. Straight forward installation. I learned from instructions that my "neutral bonded" portable generator (Westinghouse) calls for a Switched Neutral kit ($100) to be added to the transfer switch. Why isn't it built-in or pre-installed since it is a safety feature. Check your generator before buying your transfer switch. The transfer switch is incomplete without this kit if your generator is neutral bonded.
Date published: 2012-10-03
Rated 4 out of 5 by from Easy install, great alternative to the monster whole house generator. Installed this for a client that did not want to a huge "whole house" generator. It was easy to install from the external plug to the internal wiring. The entire install took me about 3 hours. It is a great little addition that, with some research, can be installed by the average home owner. a couple of down sides are that you have to do some research to find out what types of breakers can work if you want to add circuits and it is a bit pricey. If you consider how much a typical sub-panel is, this unit is a little on the high side.
Date published: 2013-09-24
  • y_2017, m_2, d_20, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_, sid_203835678, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 92ms