Model # GSTB-R

Internet #202808538

Store SKU #419567

Genie Safe-T-Beam Replacement Kit
0050049017514

Genie

Safe-T-Beam Replacement Kit

  • Compatible with Genie garage door openers
  • Door reverses automatically when an object passes through
$37.97 /each

Frequently Bought Together

Product Overview

Use the Genie Safe-T-Beam Replacement Kit to change a broken or faulty safety beam part in your Genie garage door system. The mounting brackets are included for your installation convenience.

  • Works with all Genie openers that utilize safety beams
  • Places an invisible infrared beam across the door opening; door reverses automatically when an object passes through the LED light beam
  • Diagnostic lights to help ensure proper operation
  • Durable, reliable performance; extra safety feature
  • Mounting brackets, hardware included
  • Detailed, illustrated installation instructions included
  • Call Genie customer care 1-800-354-3643 for assistance

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

My garage door sensor don't work. It's a genie with the old square sponsor's with pig tails one light on the one.

Can I use this kit to repair it?
Asked by: charles
Charles, Had the same situation. Yes this product will work just fine. Be sure to replace each sensor identically, i.e., the two LED lighted sensor with the old two LED lighted sensor and the single LED sensor with the single LED sensor. Also, use the old wires to the overhead unit and tie the new sensors in with correctly sized wire nuts.
Answered by: Geno
Date published: 2017-04-17

How many sensors are included in the kit?

Asked by: LouS
2
Answered by: idahoboy
Date published: 2017-02-14

I have a Genie garage door opener, one sensor light blinks red the other is a steady green.

Asked by: Tam30106
check to see if they are aligned correctly, also check the wiring
Answered by: Bsmith
Date published: 2016-10-25

How do you connect the replacement sensors to the existence electric cable wire?

How do you connect the replacement sensors to the existence electric cable wire?
Asked by: Dee
Screw clamp terminals.
Answered by: BillB
Date published: 2017-03-07
  • y_2017, m_4, d_21, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_43
  • loc_, sid_202808538, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms
  • QUESTIONS, PRODUCT

Customer Reviews

Safe-T-Beam Replacement Kit is rated 4.9 out of 5 by 76.
Rated 5 out of 5 by from Excellent replacement for older model garage doors. Easy to install and calibrate. Good price also Excellent replacement for older model garage doors. Easy to install and calibrate. Good price also
Date published: 2017-02-21
Rated 5 out of 5 by from These worked perfectly. I have an opener from Overhead Door. At first, I purchased the other bran... These worked perfectly. I have an opener from Overhead Door. At first, I purchased the other brand of sensors that were $10 cheaper. I think I read somewhere that Genie didn't work with Overhead Door---not true. These work great. They are also much easier to replace. They have screw connection for the low-voltage wire. These took 30 minutes to put in .....(20 minutes installation and 10 minutes chastising myself for not getting these first!)
Date published: 2016-12-13
Rated 5 out of 5 by from My garage door opener was labeled "Overhead Door Legacy," but after research I found that this Ge... My garage door opener was labeled "Overhead Door Legacy," but after research I found that this Genie replacement kit would work with the Overhead Door Legacy model. Since it was a replacement and the wiring was already there, it took about ten minutes to complete the install - removed the screws attaching the old sensors to the door frame, cut and stripped the wiring on both sides, attached the wires to the sensors, and used the same holes to attach the replacements. Plugged in the garage door opener, both lights (green and red) on the sensors lit, and the garage door opens fine. Tested the sensors to ensure it would stop if there was an object blocking the beam, and that was it. Much nicer looking than the old sensors, and much less likely to be misaligned accidentally (the brace is much stronger). If the other door sensors malfunction, would definitely replace with this kit. Overall, very satisfied with this purchase.
Date published: 2017-04-18
Rated 5 out of 5 by from Beam Me Up Scotty Work perfect. Was easy to replace bad set that was failing. I was surprised by the indicator lights being on the end pointed to the front of the garage. Seeing the red light as you enter the garage is a quick alert when flashing.
Date published: 2016-12-07
Rated 5 out of 5 by from Works great Bought these as a replacement for old ones that stopped working. Took a few minutes to install and work great. I tried another brand that did not work with my Genie opener so I recommend these if you that brand.
Date published: 2016-12-13
Rated 5 out of 5 by from I had a little trouble wiring them into the old system according to the package directions, but w... I had a little trouble wiring them into the old system according to the package directions, but when I just connected them to the stubs of the old wiring still attached the garage door worked just fine.
Date published: 2017-03-29
Rated 5 out of 5 by from Was concerned because the package had been opened and it was covered in dust. Easy to install. Ac... Was concerned because the package had been opened and it was covered in dust. Easy to install. Actually was able to use the same screw holes as previous sensor. Works perfectly.
Date published: 2017-03-28
Rated 5 out of 5 by from The directions were not clear, you have to switch 2 sets of wires. Had to call Jenie to get it th... The directions were not clear, you have to switch 2 sets of wires. Had to call Jenie to get it the right information. Works great now.
Date published: 2017-02-07
  • y_2017, m_4, d_22, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_76
  • loc_, sid_202808538, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 15ms
  • REVIEWS, PRODUCT