Model # 10366483

Internet #202241636

Store SKU #652629

Gila 36 in. x 78 in. Titanium Energy Saving Peel and Cling Window Film


36 in. x 78 in. Titanium Energy Saving Peel and Cling Window Film

$40.97 /each

Frequently Bought Together

Product Overview

This film is slightly thicker, goes on more quickly and easily, and offers high heat rejection. The static cling design allows it to be removed in seconds and be reused again and again. Those in highly seasonal climates can remove this Heat Control film during the winter months and reinstall the following year. This Home Depot exclusive allows you to bask in natural light without overheating, squinting or worrying about UV rays.

  • Heat rejection: Helps block incoming heat from the sun, improving comfort and reducing cooling costs
  • Glare reduction: Reduces incoming glare on televisions and monitors
  • UV protection: UV protection helps reduce fading on flooring, furniture, portraits, blinds and draperies
  • Aesthetics: Transparent metallic gray
  • Can be cut to fit any window; typically applied to the interior window surface
  • Static cling design for easy installation, repositioning, removal and reuse; instructions included
  • For best results use the Gila complete window film application kit
  • Static-cling design for easy installation, repositioning and removal; instructions included




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Dual-pane Windows?

Is this safe to use on dual-pane windows? I'm reading that tint can shatter dual-pane windows. Is this applyable on the outside of the window with the reflective side still facing out so it doesn't trap heat between the glass panes?
Asked by: steve
With high heat rejection, definitely would only use this on the outside of a dual pane window - saw the same concerns expressed and it makes sense that it could build heat/pressure inside the closed space between the panes.
Answered by: CoolerInAZ
Date published: 2016-12-07

Is this reflective from the outside?

I'm not allowed to install reflective materials on the window, so I am wondering if this is reflective when installed.
Asked by: JT72
Yes it is reflective - not totally mirror-like, but it is quite reflective - that's the price you pay for 70% heat rejection.
Answered by: CoolerInAZ
Date published: 2016-12-07

It's much easier to get to my skylights from the roof. If I apply this to the outside glass, will it hold up to weather.

Asked by: Tina
No, this can not be applied on the outside of the glass.
Answered by: CommunityAnswer
Date published: 2017-03-27

Does it give some privacy

Asked by: JP
Very reflective, so yes
Answered by: sarg
Date published: 2016-08-12
  • y_2017, m_4, d_23, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_, sid_202241636, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms

Customer Reviews

36 in. x 78 in. Titanium Energy Saving Peel and Cling Window Film is rated 3.2 out of 5 by 54.
Rated 5 out of 5 by from Purchased for a single pane West-facing window in an apartment - needed to be non-permanent due t... Purchased for a single pane West-facing window in an apartment - needed to be non-permanent due to the fact that it is a rental unit. The film performs very well - appears to live up to the 70% heat rejection specification. It is very expensive, but it does what it says it will do. Installation is just like regular film - a few drops of soap in a water sprayer works well - just soak up both window and film thoroughly - dripping wet, and install when window is in the shade and as cool outside as possible - this avoids bubbles. Plenty of soapy water spray on both sides of film makes re-positioning it and squeegeeing any bubbles out easy.
Date published: 2016-12-07
Rated 1 out of 5 by from NOT TO BE USED ON SEALED WINDOWS Online FAQ says Q: Do I apply the film on the inside or outside of the window? A: Apply Heat Control films to the INSIDE only. The instructions with the product says to apply it to the outside on sealed dual pane windows. Because of the conflicting information I called the help desk and was told that the static cling could not be used on the exterior as it would not stand up to the elements and couldn't be used on the inside because I have sealed dual pane windows and it could possibly crack the windows from heat build up. Product should state "NOT TO BE USED ON SEALED WINDOWS" could have saved myself a lot of time and energy.
Date published: 2016-06-02
Rated 2 out of 5 by from Confusing video and paper instructions I purchased item #10366483-50146358 and I installed it on four narrow windows on the southern exposure of my house. There are instructions wrapped around the film, one of which states if I am installing on a double pane insulated glass (that's me) to place the product on the exterior side of the glass. The instructions also stated to remove the liner from the film by putting scotch tape back to back on a corner and pull off the liner. I tried many times and there was no separation. I then looked at a video on how to install Heat Control film and it shows the tape on the corners too and being installed on interior side. I called Gila customer service and advised that the liner was not coming off and the nice lady stated, "oh, your product doesn't have any liner, it is static cling, just cut and spray both surfaces and install. She also stated that it is to be installed on the inside surface. Duh, that is not in writing or video anywhere. I did get the windows covered but found it challenging to get some of the corners to stick, and the plastic film is thick so a new razor blade is important. Today I finished my windows with the adhesive version of the Heat Control film and I think it was easier to install even though it did have a film liner to remove.
Date published: 2016-06-10
Rated 1 out of 5 by from Poor product I purchased the Gila Heat Control Window Film at the suggest of one of the Home Depot Associates. I was told of the ease of applying the film. Well it was easy to apply, however, the film refuses to stick on my windows. I have purchased products from Gila before and did not have a problem like this. I was told you did not have to peel the tint and is was reusable. After three days the film continues to roll up on the corners. I followed all the instructions, but it just refuses to stick. I'm sure the film does everything it says, however, it must stay on the window for it to be effective. With price tag of $40.00,plus additional for spray kit, I thought it would be easier to apply with the same performance of the peel off film which sticks to everything when mounting. Chances are I will have to purchase another type of window tinting as I am very dissatisfied and cannot recommend this at all.
Date published: 2016-04-09
Rated 5 out of 5 by from so far, very good! We have the type of storm door with full length window or screen. We can't use the screen, however, because of neighborhood (tom)cats which drive our (indoor spayed female) cat into a frenzy when they invade her territory. The door faces west; the accumulated heat was oppressive, and this product provided the perfect solution. It provides UV protection and privacy without distorting our view outside. Both my husband and I have checked at different times of day and are pleased with how much the accumulated heat has been reduced--especially during a recent heat wave. This does require two people to install if applying to a large area and take care that hair or fibers don't cling to the surface placed against the glass because they will be visible.
Date published: 2012-06-21
Rated 4 out of 5 by from product works but need time an patience to apply Product works to keep out UVA rays but if you DO NOT have time and patience then this product is not for you. It took about 45 minutes to apply to one side of our patio window. The product is easy to work with and is thick for a film. The hard part is getting the bubbles out, no creases and getting it smooth. That is where the patience comes in. You need to use the Gila application solution first, directly on the window, before applying the film but use sparingly under the film or you will have more bubbles to remove...I started at the top and worked down. When using the squeegee work from top to bottom and use small strokes. Once you get the film or part of the film down you need to use the solution over the film before you squeegee. When you get to some bubbles that won't seem to move spray solution and then use slow very small strokes and the bubbles will move. If there are bubbles on the edges you might have to lift the edge and squeegee and then use your fingers to smooth them. Don't be afraid to use the solution over the film to smooth it out. If you don't the bubbles won't move well and you could rip the film. Don't bother to buy the Window Film Application Kit by Gila as the cutter doesn't work well....your better off just buying the solution and using your own utility knife and saving $4.00. We still had to use the utility knife so we wasted the money. However, the product DOES NOT come with the plastic squeegee. I think the product is a little expensive but it is more economical than having it professionally done.
Date published: 2012-06-09
Rated 1 out of 5 by from Not a good product Ugh, what a waste of time and money!! The boxes for the adhesive product were faded and a little dog-eared in the display, so I picked this static cling version instead because the boxes looked newer. I also bought the installation kit (spray, squeegee, blade) and followed the instructions exactly (and I'm good at following written instructions). No matter how hard I tried (and I tried a lot), the film WOULD NOT stay adhered to the top edge of the window. In the end, I stopped trying and watched the whole thing unpeel itself and slump to the floor in a heap. A big disappointment! Hopefully the adhesive-based product sticks better. I also wonder if this product was previously used because the backing wasn't really attached to the film although they were rolled up together. If that's the case, then the product apparently isn't reusable either.
Date published: 2016-03-31
Rated 1 out of 5 by from Avoid at all costs. You need a new plan Avoid at all costs and get a new plan. I kniew there would be a problem when the Gila brain trust put the application instructions inside the roll. I did not discover them until after calling customer service as to how to get the liner off. (Put small pieces of tape on the corner on each side and allow them to adhere to each other, slightly and then pull apart. This sorta works. The liner readily grabs onto the film and the film readily grips itself. So while you are trying to get this separation started to the point that you can do something, the wetting solution on the window has dried. Simply put a bad idea, poorly executed. I will look for static cling that goes on the outside of the window. My previous installation of this type of film lasted 20 years and would still be good if the dog would bark instead of paw at the door.
Date published: 2016-05-11
  • y_2017, m_4, d_24, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_54
  • loc_, sid_202241636, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms