Rated 3.4 out of 5Â by 7
Rated 5 out of 5Â by DIYer Looks good
Very easy to install. Easy to clean and looks great.
August 5, 2014
Rated 2 out of 5Â by Barthenon Flimsy
Inexpensive, but flimsy. Mine lasted three weeks until my son leaned on it while shaving, the actual piece was only maybe 3/8 thick. The edges are thicker, but taper fast to the measurements above. To effectively use this, you must make sure it fits your vanity EXACTLY, all the edges match the vanity edges, and it is cemented that way, otherwise it will not handle weight well.
March 14, 2010
Rated 2 out of 5Â by Sully Won't fit the standard vanity cabinet to install
The supplier of this item has either changed or cut corners. This is the second one of these I have bought from Home Depot and the first one did not have any problems (about 12 years ago). The problem is that you must caulk/glue this top down to the edges of the vanity cabinet that it sits on, but the top has been molded on the bottom side so that there are no surface areas that come in contact with the vanity except at the corners. The top is basically hollowed down to about half the thickness starting at about 3/4" from the edge, which is right where the vanity walls should be glued to the top. I am going to use BONDO to fill in the big void all the way around it on the bottom, then sand it flat so that it can be attached to the vanity. This is a really pain in the backside, so don't buy this item unless you check this feature out carefully. You have to take the unit out of the box and examine the bottom to know if you got a place to glue it down or not.
January 6, 2012
Rated 3 out of 5Â by comptaz Reasonable purchase.
It looks nice and is finished pretty well. But I had to carve on the drain as the drain would not fit in the hole. So quality control is a bit lacking. However I fixed it and still plan on installing. It should work fine.
April 3, 2014
Rated 5 out of 5Â by Run7ner Vainty Top
Perfect for our DIY project in the bathroom. It fit the vanity, was light enough for homeowners to lift and install, and was squared correctly to align against the walls. So relived this part of the project worked. Have had it a month with no problems.
June 15, 2010