Rated 2.7 out of 5 by 43
Rated 4.0 out of 5.0 by Biginner good
It was hard to install it. Because it would not turn. If you buy and install it, you can understand what I mean. After installation, goooood!!
October 18, 2016
Rated 1.0 out of 5.0 by NicoG Not what I expected :-(
Hard to get the mount off; the hose doesn't fit properly in the holder. I had to return the first one because, even after calling product support, I couldn't get the base off, and the whole thing came apart. The second one was easier to get off, and screwing it in the wall was fairly simple, but the hose does not fit properly in the holder. The directions are wrong too. It says to mark the holes through the base, and then remove the base. Well, you can't exactly mark the holes with the base still attached. I also wish Home Depot carried more than one brand. At my store, this was the only option for handheld shower holders.
August 26, 2016
Rated 2.0 out of 5.0 by JHS Shower mount could be better.
This mount is made of plastic with a chrome finish. It attaches (not very securely) with a two-sided adhesive patch. It wobbles and sags when the hand showerhead is inserted.
September 27, 2016
Rated 5.0 out of 5.0 by Grandpamtnpaul Great Mount For Added Flexibility And Mobility
My wife has severe RA and requires a bath chair to use for her bathing. The existing hand-held shower was mounted on the shower head fixture, approximately six feet high. That was far too challenging for her to reach while sitting in her bath seat in the tub. So, this Glacier Bay Personal Shower Mount solved that dilemma. I mounted it forty-eight inches high from the bottom of her tub two feet from the front of her chair so she can easily reach it. This mount provides her reach and mobility. She can effortlessly remove it from the mount to use as hand-held, or, aim her hand shower towards her lock it into place freeing both her hands. This mount will conveniently 'lock' your hand-held shower in place with a quarter turn to the right - unlock in reverse. Additionally, we bathe our Grand Kids in this same tub, and they love the hand-held mounted on the wall nearer to them.
This shower mount is ideal as a primary or secondary shower mount. It can easily be installed anywhere on your existing shower walls using the included, screws and anchors, or, with the provided adhesive pad. I installed this mount with the adhesive, which requires 24 hours for the to set and cure before use. This mount has been installed for over two weeks now and works great and holds securely. I highly recommend the purchase of this mount for added flexibility and mobility of your hand-held shower.
March 16, 2016
Rated 1.0 out of 5.0 by D47150 Use less
Product doesn't fit our application needs couldn't use it
August 16, 2016
Rated 5.0 out of 5.0 by Teeny Does its job!
I read all the reviews after I bought simply because I was going to review it myself and I gotta say they must have improved it since these bad reviews. It has two screw holes for the that mount option. The suction ( the method I chose to use) has withstood two young children that shower their selves and two adults use without fail. If I were to use the screw method I would peel off the sticky for added strength. Over all it has exceeded my expectation of performance. Glad I chose it to help my children reach it better!
November 29, 2015
Rated 5.0 out of 5.0 by shorty It's working well.
Very easy to install the adsevice is working very well. It also has the ability to be installed with screws which if it should fail in the future I will be able to remounted with screws which will be very secure thank you
August 2, 2016
Rated 1.0 out of 5.0 by frustrated poor design/ instructions useless
This one mounts in any one of three ways -- screw, suction or adhesive. If you want an adhesive mount, it appears to be "peel and stick". Just make sure you have the holder (which sticks out to the side of the base) facing with the wide opening up. The handle of the hand held shower will not fit in it. It is designed to hold only the collar of the hose (the part that screws to the base of the shower head) For suction mount, the instructions call for you to remove the mounting bracket (which then reveals the black suction pad beneath it). However, the plastic mounting bracket (which also has to be removed and then reattached if you want a screw-mount) wraps around the base and has to be manhandled to remove it from the unit. I took it back to Home Depot and the guy at the service desk had to use pliers to bend the plastic enough to get it to snap off. Lastly, during your shower, the shower head suddenly may spin or pivot in the smooth plastic holder, spraying water everywhere, unless you wrap a thin rubber band around the base of the shower head to give it some friction.
July 27, 2016