0883049007700

Gladiator

Model GAAC0232RY

Internet #204280721

Store SKU #1001107076

2 in. White Screws for Garage Wall Shelving GearTrack Channels and GearWall Panels

$6.97 /each
  • Compatible with GearTrack and GearWall systems
  • Color-matched for a seamless look with white channels and panels
  • Installs on drywall over studs, wood studs or masonry walls

Frequently Bought Together

Product Overview

Make your storage units look seamless with Gladiator color-matched screws. The white color matches the look and feel of the Gladiator product line for a consistent, uniform appearance. Pack contains 32 screws.

  • One 32-pack of Gladiator color-matched screws will mount one 8 ft. GearWall panel or four 4 ft. GearTrack channels
  • These screws mount in either drywall on wood studs or directly to bare wood studs, giving you a variety of locations to place your product
  • Number 8, 2 in. heavy-duty screws can be used on both covered and uncovered walls
  • White color matches the family look of other Gladiator brand products

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

2 Questions2 Answers

Customer Questions & Answers

2 in. White Screws for Garage Wall Shelving GearTrack Channels and GearWall Panels
2 in. White Screws for Garage Wall Shelving GearTrack Channels and GearWall Panels

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 2 in. White Screws for Garage Wall Shelving GearTrack Channels and GearWall Panels
 
1 answer

What is the strength of these screws? I mean allowable tensile strength and shear strength in lbf

This question is from 2 in. White Screws for Garage Wall Shelving GearTrack Channels and GearWall Panels
Asked by
Read all my Q&A
June 23, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 28, 2016
Answer: 
We apologize for the delay in response, this is a rather technical question and we are working with our supplier for the exact details. They have been able to provide the following:
MATERIAL:STEEL C-1022.
SURFACE HARDNESS: HV600 MIN
CORE HARDNESS:HRC 28-38.
BREAKAGE TORQUE: 3.4N.m MIN
We realize this does not directly answer your question and are still awaiting further details from our supplier.
Read More
We apologize for the delay in response, this is a rather technical question and we are working with our supplier for the exact details. They have been able to provide the following:
MATERIAL:STEEL C-1022.
SURFACE HARDNESS: HV600 MIN
CORE HARDNESS:HRC 28-38.
BREAKAGE TORQUE: 3.4N.m MIN
We realize this does not directly answer your question and are still awaiting further details from our supplier. Thanks for your patience.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from 2 in. White Screws for Garage Wall Shelving GearTrack Channels and GearWall Panels
 
1 answer

Mounting to Cinder Block in Garage

This question is from 2 in. White Screws for Garage Wall Shelving GearTrack Channels and GearWall Panels
Asked by
Bradenton, Florida
Read all my Q&A
February 2, 2016
Can these white screws be used for bare Masonry (Cinder block) walls? If not, what type screws must be used?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 4, 2016
Answer: 
Thank you for your interest in the Gladiator Garageworks products. The white screws are to be use on wood studs. For bare masonry cinder block walls, masonry screws or tapcons must be used.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
1 of 1
  • 2016-09-08 T11:31:56.613-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204280721, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 2.4 out of 5 by 11 reviewers.
Rated 4.0 out of 5.0 by These White screws are more than adequate, for me. I had installed more than a dozen wall tracks using these screws in my home in Annapolis. I used a couple different drills with bits, including the Worx power hand drill. All tracks were installed on studs and I hung a dozen cabinets and Gladiator accessories on these tracks. Of all the screws I used, I stripped about one half dozen but that was due to not drilling pre-holes in the studs. Since then, I removed all Gladiator cabinets, accessories, and tracks and moved to Florida, where I'm in the process of re-installing this Gladiator Garageworks system. So far, I've only installed a couple track, with these screws into the back wall which consists of drywall backed against 3/4 inch plywood, which in turn is attached to studs. Since the stud finder cannot locate the studs, I just attached the tracks to the drywall - plywood combo, successfully. While not relying on this to hang cabinets, I am hanging Gladiator shelves and accessories. Since, aside from the back wall, the other walls are bare (painted) masonry, I will have to use tapcon screws to attach the tracks and mount the cabinets. I said all this to say, I'm actually reusing these white screws, with no problem, especially since I'm pre-drilling holes for the screws in the drywall/plywood boards on the back wall. I did find, however, I had to make certain the drill bit was perfectly perpendicular to the screw heads to prevent slipping and stripping of the screw heads. So, for me, these screws are quite fine, and I'm happy I could reuse them with no problems. While the attached photo may appear a bit "busy," my garage in a work in progress as I've just moved in to my new home, its added to show the shelves attached to the track. Thanks, Captain T February 5, 2016
Rated 1.0 out of 5.0 by near impossible to use They shouldn't have painted the screw heads or used Phillips head. March 27, 2016
Rated 5.0 out of 5.0 by Use a 1/4 impact driver, makes a huge difference I just installed an entire wall of gladiator 8' wall panels this past weekend. I installed well over 200 screws without a single one stripping out. I predrilled and used a 1/4 hex impact driver, made a world of difference. Using only a drill with a Phillips bit does not work well at all. Out of the hundreds of these screws I have installed in the past two years in my basement, shed and now garage only one package had half of the screw heads filled in with paint. November 29, 2015
Rated 1.0 out of 5.0 by Not the Quality of Other Gladiator Products I experienced the same problems as the previous reviewer. I ended up buying higher quality screws at a local home improvement store, and replacing the color-matched screws where visible to assure a consistent appearance. September 21, 2015
Rated 2.0 out of 5.0 by White but otherwise not a good product The only benefit of this product is the color matches that of the Geartrack channels and Gearwall panels. The paint makes it difficult for the Phillips head bit to maintain good purchase and thus it tends to slip which in turn removes some of the paint! It is better to use regular deck screws and then paint them if that is important to you. September 15, 2015
Rated 1.0 out of 5.0 by Not the best option These screws are guaranteed to strip. The Husky screws for that system work much better, are thicker, have a better head and come with the special bit. I used 2 boxes of Husky brand screws and dropped 2 of them, with non stripping at all. I ran out and had to use the Gladiator brand that came with a kit and dropped 8 out of 10 I was screwing in, and stripped every one of them. The Husky screws are even cheaper and have been in stock at several of the Home Depots in my area. July 3, 2015
Rated 1.0 out of 5.0 by Worst screw ever. I bought 30 packages of these screws to install the 8' gear wall sections. The screws are poor quality. I had at least 30% of the screws that stripped out the head even when predrilling. Some of the screws where bent in manufacturing which did not help in installation. Do your self a favor and buy some Torx head screws. July 11, 2015
Rated 4.0 out of 5.0 by Good with no stripping These worked great. I pre-drilled the holes to make installation easier for me since I did everything myself. I would recommend doing this extra step as it seems many people had issues with the screws stripping otherwise. I put up 3 boxes of these with zero stripping problems. The paint did chip off a bit (Not that noticeable) and I may get some touch up paint, but overall they look and function as expected. Downside is that they are a little expensive for screws. July 10, 2015
  • 2016-09-08 T11:43:45.123-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_11, tr_11
  • loc_en_US, sid_204280721, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 33ms
  • REVIEWS, PRODUCT