Model # 42001

Internet #100670610

Store SKU #757442

Gorilla 7/8 fl. oz. General Purpose Epoxy
0052427420015

Gorilla

7/8 fl. oz. General Purpose Epoxy

$547 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

Gorilla takes epoxy to the Gorilla tough level. Easy to dispense, and use, Gorilla Epoxy brings a strong, long-lasting bond for household and automotive repairs, alike. The two-part, gap-filling formula easily bonds steel, aluminum, wood, ceramic, tile and much more.

  • Dries clear: Ideal for clean, easy finishing
  • 5 Minute set: Plenty of repositioning time for the perfect fit
  • Gap-filling: Fills voids and bonds uneven and vertical surfaces
  • Water resistant: Withstands moderate exposure to water
  • Solvent resistant
  • Bonds steel, aluminum, glass, wood, ceramic, tile, plastic and more
  • Easy-to-use syringe: Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly
  • Includes a cap for multiple uses
  • Click here for more information on Gorilla Glue

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
1.13
Product Height (in.)
8.69
Product Width (in.)
3.38

Details

Adhesion level
High
Adhesive Product Type
Glue/Epoxy
Curing time (hours)
24
Dries clear
Yes
Drillable
Yes
Features
Dries Clear,Drillable,Moisture Resistant,Sandable,Solvent Resistant
Flammable
No
Glue/epoxy type
Epoxy/super glue
Indoor/Outdoor
Indoor/Outdoor
Moisture Resistant
Yes
Product Weight (oz.)
2.32 oz
Returnable
90-Day
Sandable
Yes
Set Time (Min.)
5
Solvent resistant
Yes
Stainable/Paintable
Stainable & Paintable
UV/sunlight resistant
No

Warranty / Certifications

Manufacturer Warranty
None

More Products With These Features

Search

Customer Questions & Answers

Does GORILLA EPOXY bonds mirror glass and PVC?

Asked by: Anonymous
Yes it will bond to both it is very strong
Answered by: fizzie
Date published: 2015-11-04

Can I use this to bond metal and wood?

I am trying to make a knife and I have to use epoxy to bond the wood handle to steel. Would this work?
Asked by: sanchezjoe
Absolutely
Answered by: Hayviator
Date published: 2017-01-07

I have a roll-up/roll-down garage door that is made of fiberglass front and back over a foam core.

The door is approximately 8 years old. The pull-up handle is secured to the bottom of the door by two self-tapping screws which have loosened up and no longer hold the handle in place. Can I use Gorilla Glue Epoxy to reset the screws and/or glue the handle directly to the door surface?
Asked by: Anonymous
It would probably work loose in time. This is too dynamic an application for adhesive. I would drill through and replace the screws with stainless-steel bolts and washers.
Answered by: tilepainter
Date published: 2015-11-10

Can one use it to repair seams in between slabs of granite?

Asked by: Anonymous
I would think so. I used it to glue an onyx bookend back together and it's a heavy eagle with the break through his little legs. It dried completely clear and is adhering the onyx very well.
Answered by: LILass
Date published: 2015-11-04
  • y_2017, m_8, d_14, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_30
  • loc_, sid_100670610, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 14ms
  • QUESTIONS, PRODUCT

Customer Reviews

7/8 fl. oz. General Purpose Epoxy is rated 4.4 out of 5 by 77.
Rated 1 out of 5 by from Purchased several times out of convenience and cost. Worked well enough. But my last one I purch... Purchased several times out of convenience and cost. Worked well enough. But my last one I purchased (6/3/2017) wouldn't harden. NO matter what I did the freaking mix wouldn't set. TOTALLY UNACCEPTABLE. Had to redo so much dang work. Ill stick with the other brands
Date published: 2017-06-08
Rated 1 out of 5 by from After doing as instructed, I have mixed generously and applied the epoxy coating to the area, aft... After doing as instructed, I have mixed generously and applied the epoxy coating to the area, after clamping both ends down and leaving them overnight - making sure to check on it to see if it was still in place, I waited 24 hours just as instructed, did a stress test and the glue simply fell apart.
Date published: 2017-04-20
Rated 1 out of 5 by from I am a big fan of Gorilla tape so was pretty at ease purchasing this epoxy-I've used most of the ... I am a big fan of Gorilla tape so was pretty at ease purchasing this epoxy-I've used most of the other brands in the past with good results so I was pretty confident this would work fine. The problem was you need to place equal parts into a container/surface and mix them for 20 seconds before applying, but the two materials did not come out of the tubes at the same rate-one of the materials, which I believe was the hardener, came out at less than one-half the rate of the other, which resulted in the epoxy never getting hard-two full days after applying it was still sticky and not holding, which obviously ruined the materials I was bonding (and the hours of fabrication I had spent constructing those materials).
Date published: 2017-05-30
Rated 5 out of 5 by from This is a great adhesive. Make sure you use gloves to protect yourself prior to using this as re... This is a great adhesive. Make sure you use gloves to protect yourself prior to using this as removal of the epoxy could spell trouble. I am cautious so, though it recommends a 5 minute set, I will add a couple of minutes just to be sure. Let it cure for 24 or more hours and it will be set for a long time. My application of bonding wood to steel with this adhesive gives me great confidence that this will hold up for a long time.
Date published: 2017-07-24
Rated 5 out of 5 by from This worked very well and has held together. The dual tips allow the same amount dispensed for m... This worked very well and has held together. The dual tips allow the same amount dispensed for mixing. Pay attention and don't throw away the tip in packaging. This allows you to reseal it.
Date published: 2017-05-09
Rated 5 out of 5 by from Sets up fast and pretty easy to work with.... Sets up fast and pretty easy to work with.
Date published: 2017-04-11
Rated 5 out of 5 by from Excellent bond strength; Longer cure time. I use Gorilla brand epoxy for joining metal to metal, metal to wood, and metal to some plastics in projects. I sometimes use it joining wood to wood instead of gorilla glue as the epoxy does not expand like their glue. The epoxy working/set up time is about the same as other 5 minute epoxies. Once you have mixed the 2 parts together you have about 5 minutes to use what you've mixed before it loses its workability. Make sure your have your pieces cut, cleaned, arranged and are ready to assemble (and clamp if necessary) before you mix up a batch of epoxy. Also, remember that it does not take much of this product to produce an extremely strong bond.
Date published: 2015-06-18
Rated 5 out of 5 by from How to join steel to wood? Epoxy. I wasn't sure how the whole project was going to go -- steel hairpin legs onto an old library card catalog. There wasn't enough wood to drill holes. So, I used some Gorilla Glue Epoxy and some shorter-than-I-would-have-otherwise-used wood screws to act as clamps. The cabinet is heavy and the hairpin legs aren't self-supporting. Worked perfectly. There was a little time to wiggle things into perfect position, and honestly I mixed the epoxy on the steel surface rather than in the plastic tray. It was fine.
Date published: 2015-02-15
  • y_2017, m_8, d_14, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_77
  • loc_, sid_100670610, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 26ms
  • REVIEWS, PRODUCT