Model # AC43

Internet #202530462

Store SKU #483048

HDX 43 in. Steel Roller Stand with Edge Guide

HDX

43 in. Steel Roller Stand with Edge Guide

  • Loading capacity of 250 lbs.
  • Features flip up edge guide for stock alignment
  • Folds flat for easy storage and transport
$2497 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

It is a smooth action ball bearing roller. Its loading capacity is 250 lbs. It is used with table saw, band saw, chop saw or planer.

  • 11-1/2 in. wide x 2 in. diameter
  • Flip-up guides for stock alignment
  • Folds flat for storage or transport
  • Moves long, wide, heavy materials

Specifications

Dimensions

Product Depth (in.)
19.69
Product Height (in.)
43.5
Product Width (in.)
12.68

Details

Bench & Stationary Tool Type
Accessory
Product Weight (lb.)
11.7lb
Returnable
90-Day
Tools Product Type
Tool Storage

Warranty / Certifications

Manufacturer Warranty
90 Day Return Policy

More Products With These Features

Search

Customer Questions & Answers

This is adjustable can go lower than 43"

Asked by: Kay
Yes it can.
Answered by: MisterC
Date published: 2017-02-21

Is states the height is 43" is that a max or stationary? Is the height adjustable and what range? Thanks

Asked by: Encee
43 inches is the maximum height.
Answered by: MisterC
Date published: 2017-02-21

Is a replacement locking handle available?

The plastic on my handle broke away from the bolt. It's a 5/16" coarse thread and I could rig something but would prefer to find an exact replacement.
Asked by: Bob
Not available. Just get a 5/16" coarse thread bolt and weld a piece of metal to it. You will never have this problem again
Answered by: Dave
Date published: 2017-04-20

I need a set of roller bearings for the rollers on both my stands,

The stands are workforce brand 43'' tall, I don't know if there are bearings inside but what ever they roll lopsided
Asked by: clifford
Not available. You gotta purchase another roller stand.
Answered by: Dave
Date published: 2017-04-20
  • y_2017, m_8, d_18, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_, sid_202530462, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 96ms
  • QUESTIONS, PRODUCT

Customer Reviews

43 in. Steel Roller Stand with Edge Guide is rated 4.1 out of 5 by 83.
Rated 4 out of 5 by from I bought 3 stands and had to return 1 because it wasn't level. Since I have only had them a coupl... I bought 3 stands and had to return 1 because it wasn't level. Since I have only had them a couple of weeks , I am not ready to give them a rave review. But so far they have done well and are doing what they were designed to do. Just make sure before you purchase one to check it for level. If they hold up over time they will be well worth the purchase price. They fold up and store easily, which is a plus in a limited space area
Date published: 2017-02-21
Rated 5 out of 5 by from picked up two of these stands, making counter tops so i needed to rip mdf in half, not a easy job... picked up two of these stands, making counter tops so i needed to rip mdf in half, not a easy job by yourself on a table saw. these stands helped me on the out feed side so i didn't need anyone's help. they were sturdy, quick to adjust and work flawlessly, i think i will grab a couple more for some other projects i have.
Date published: 2017-06-20
Rated 4 out of 5 by from Virtually identical to the Workforce model it replaced, but I believe the Workforce was a little ... Virtually identical to the Workforce model it replaced, but I believe the Workforce was a little more stable. The feet don't sit completely level on the floor, but over all a good stand for the price. I had to pick through several in the store to get a good one.
Date published: 2017-03-14
Rated 3 out of 5 by from After some "adjustments" this product works ok. 1) Initially annoyed at this product as the pin... After some "adjustments" this product works ok. 1) Initially annoyed at this product as the pins holding the roller in place are just barely long enough to fit in the bracket. Makes the roller likely to fall out in the middle of using it! Finally grabbed the pliers and bent the brackets inward a little bit; just enough to prevent the roller from falling out. Works better now. 2) The other design flaw is the edge guide, which is really just a pair of metal tabs that flip up and stay in place mostly due to the pressure of the pins holding the roller in place (see problem #1 above). These tabs tend to lose their grip and fall back down. Do not count on them for an edge guide. Going to break out the pliers again and see if I can bend the tab that holds the guide in place to make it a tighter fight. Seems to me that it would not have been terribly difficult to design this properly in the first place: longer pins on the roller, proper hinges for the edge guides with a real clamp to lock them in place. The price is reasonable at ~$25, but would gladly pay a few dollars more for a better design.
Date published: 2017-02-21
Rated 3 out of 5 by from Works Ok Don't buy this one and spend a little more on the Ridgid stand. Like others have said, the roller just barely stays in place, and i had to bend the legs on my stand to make it flat.
Date published: 2017-03-12
Rated 3 out of 5 by from Roller head is good but the stand is defective My issue with this product is the feet. I did not use the stand until the 90 day return window had passed. One of the feet was welded on incorrectly and is off by over 1/2 inch. I have to use shims to make it usable. I think the stand would be just fine if not for the defect. Just check it at the store before you purchase it.
Date published: 2016-10-22
Rated 3 out of 5 by from The product is OK. What is not, is receiving... The product is OK. What is not, is receiving yet another request from you to rate something I bought online. Writing a product review for you is a waste of my time and I resent you hounding me nearly every time I make an online purchase. Those folks who write tomes on a can of paint must have lots of leisure time...I don't. Why ever would I want to get into a conversation about a lumber roller....please, please, get a life!
Date published: 2017-06-21
Rated 5 out of 5 by from My husband purchased two of them. Hasn't used them yet, but he's still happy with his purchase. My husband purchased two of them. Hasn't used them yet, but he's still happy with his purchase.
Date published: 2017-04-18
  • y_2017, m_8, d_17, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_83
  • loc_, sid_202530462, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 99ms
  • REVIEWS, PRODUCT