0819561010348

HDX

Model HDX4CF4

Internet #205373468

Store SKU #1000248487

Carbon High Flow Filter

$29.98 /each
  • Fits Glacier Bay system HDG4HS4 & all high-flow household systems
  • Reduces sediment and chlorine taste and odor
  • 25 micron

Frequently Bought Together

Product Overview

The carbon in the HDX Advanced High Flow Household Carbon Filter is made to provide better tasting water throughout your home. It reduces sediment as well as chlorine taste and odor. This filter is certified under Ecodyne Water Systems and fits Glacier Bay Household System HDG4HS4 and all major brands of high flow systems. This high flow carbon filter has a 25 micron rating and lasts up to three months.

  • Carbon
  • Universal fit - fits HDG4HS4 and all major brands of high flow systems
  • Reduces sediment and chlorine taste and odor
  • 25 micron
  • Lasts up to 3 months
  • Fits in place of GE replacement filter H for models: GXWH40L, GXWH35F, or GNWH38S
  • NSF certified under ecodyne water systems

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

11 Questions16 Answers

Customer Questions & Answers

Carbon High Flow Filter
Carbon High Flow Filter

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Carbon High Flow Filter
 
3 answers

Why can I not get my housing to unscrew so I can change the filter?

This question is from Carbon High Flow Filter
Asked by
Read all my Q&A
November 29, 2015
I broke the wrench trying to get it to unscrew.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
April 1, 2016
Answer: 
Hey Bob, First turn off the water coming into your house and make sure that all pressure has been released by opening a faucet anywhere. Then there should be a button on your filter housing, push it and make sure there isn't any pressure left on the filter. If no water comes squirting out then your good to go and the housing should be able to be unscrewed then. As long as there is pressure in the lines Read More
Hey Bob, First turn off the water coming into your house and make sure that all pressure has been released by opening a faucet anywhere. Then there should be a button on your filter housing, push it and make sure there isn't any pressure left on the filter. If no water comes squirting out then your good to go and the housing should be able to be unscrewed then. As long as there is pressure in the lines the housing is a royal bear to unscrew and water will go everywhere. Hope this helped Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Georgia
Read all my Q&A
Home Improvement Profile: DIYer
January 7, 2016
Answer: 
Be sure to relieve the water pressure in the filter. It's almost impossible to remove otherwise.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

December 2, 2015
Answer: 
It is possible that the housing was over-tightened during installation or when you changed your filter last. A strap wrench may help you unscrew your housing. HDX offers a Universal Strap Wrench, model number HDXAWO4.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Carbon High Flow Filter
 
3 answers

O-ring

This question is from Carbon High Flow Filter
Asked by
San Marcos
Read all my Q&A
April 16, 2015
Does Home Depot have the replacemnt O-ring for this filter? What locations?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Read all my Q&A
April 1, 2016
Answer: 
Yes they do. It is a HDX Universal o-ring kit that comes with about 4 O-rings of different sizes in the bag along with a little packet of grease. The biggest one in the bag fit my whole house filter, I bought 2 of the packs at my local home depot where they have the replacement cartridges.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Asked by
San Antonio, TX
Read all my Q&A
March 15, 2016
Answer: 
The -rings come with the item, ensure you have a plastic wrapped one to ensure complete item.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

April 22, 2015
Answer: 
Thank you for your recent inquiry with The Home Depot. Unfortunately, I need more information from you in order to properly address your question. For any other questions, please call us at HomeDepot.com Customer Service 800-430-3376. Thank you for shopping Home Depot.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2
This question is from Carbon High Flow Filter
 
2 answers

how often should i replace the filter??

This question is from Carbon High Flow Filter
Asked by
Read all my Q&A
January 9, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Reidsville North Carolina
Read all my Q&A
Home Improvement Profile: Other
January 26, 2016
Answer: 
every three to four months
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

January 11, 2016
Answer: 
The life of these filters is 3 months dependent on water conditions and volume of water used. Typically, if your water changes taste/quality or has a reduced flow rate you may need to replace your filter.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Carbon High Flow Filter
 
2 answers

Correct filter does not fit

This question is from Carbon High Flow Filter
Asked by
South Boardman Mi
Read all my Q&A
August 31, 2015
I purchased a HDX High-Flow Household Carbon Filter (HDX4CF4) to fit my new Glacier Bay household system HDG4HS4. The sump will not screw on far enough to stop leaking. The seal on the top of the filter appears to have been cut through where the filter meets the head. This was from my first attempt to tighten down the head. This makes the seal look like two separate seals one inside of the other. The seal on the other end stayed intact. What am I doing wrong? It looks like the filter is too tall. When I screw the sump on without the filter it does NOT leak.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Read all my Q&A
January 10, 2016
Answer: 
FLTRRC4 is to tall causing o-ring on HDG4HS4 to not fully seat.
BTW 800-247-1090 on the box connects you to adult chat line.
So full of fail.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

September 1, 2015
Answer: 
Please call our customer service line at 1-800-247-1087 and they will be able to help you.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-24 T15:58:52.661-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_205373468, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 334ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 40 reviewers.
Rated 5.0 out of 5.0 by High Flow Filter Excellent value for this product. Easy to install. Highly recommended. August 23, 2016
Rated 1.0 out of 5.0 by Not if you are trying to replace the GE fxhtc Been using ge for iver 10 years n still will. These are junk unless you prefer a dirtier water with an oily taste. Thought after a couple weeks I just got a bad one so I bought another. Mistake!!! Same thing. Now $60 in a months time and in the trash. Thankfully amazon has the ge for same price as this cheap imitation. Wont be buying again. July 14, 2016
Rated 1.0 out of 5.0 by Product was altered since last purchase This filter which was made in the US is now made India and is smaller in diameter than the old one. Consequently it would not seat properly in my GE Smarter Water unit and I could not get the unit to seal properly . I had to re-install the old one and am now probably going to have to replace my house filtration system. July 6, 2016
Rated 5.0 out of 5.0 by Whole House Filter Purchased the unit to fit our GE Whole House Filter and it fits and performs perfectly.. Quick install, with no hassle. Better filtration with no noticeable decrease in water flow or pressure. June 28, 2016
Rated 5.0 out of 5.0 by Water filter Love that this water filter is always available at my local store. Thank you. June 28, 2016
Rated 4.0 out of 5.0 by Good Good filter not great, but good. Will buy again.................,.......... April 19, 2016
Rated 5.0 out of 5.0 by high flow water filter for glacier bay would love to find a lower price,expensive replacing every 3 months,info on box dont tell you.but like the ease of changing it out April 26, 2016
Rated 5.0 out of 5.0 by excellant filter The carbon high flow filters work much better than folded paper style filters. May cost a little more but the carbon high flow filter is made stronger (plastic) and holds up to sand particles coming form our well. April 19, 2016
  • 2016-08-23 T11:45:02.031-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_40, tr_40
  • loc_en_US, sid_205373468, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 104ms
  • REVIEWS, PRODUCT