Rated 1.8 out of 5 by 21
Rated 5.0 out of 5.0 by HD76018 Removed Brass Nipple in Minutes
I bought this in spite of the many poor reviews. My need was to remove a brass nipple from a watet pump outlet. I had tried every type of pliers in my toolbox but the nipple wouldn't budge. This tool allowed me to remove the nipple in only a few minutes.
March 25, 2016
Rated 1.0 out of 5.0 by PaloAltoOG Too short
These are too short to be of any real use. Purchase the HDXInternal Pipe Wrench Set instead
July 19, 2016
Rated 4.0 out of 5.0 by rick Broken gas line
My gas line broke at a tee in the line. Used the 3/8in.extractor. worked perfect. This save me from replacing my whole gas line under my house. Thanks.
July 12, 2016
Rated 1.0 out of 5.0 by St12 Poor cheap tool
Extractors are not tapered so they don't fit inside the pipe easily. Also, gripping teeth are not sharp so they do not grab very well, even if you manage to get them to fit inside the broken nipple.
July 9, 2016
Rated 1.0 out of 5.0 by Tristan 1/2" extractor doesn't fit 1/2" pipe!
The extractor is too small and doesn't engage the pipe at all. Worthless.
June 25, 2016
Rated 1.0 out of 5.0 by Semiprotech Pass on these
Heed the warnings about not fitting a broken shower head pipe.
The quality of the product is pathetic. The steel used is not hardened steel. It's more akin to hard pot metal.
The hex ends on these are WAY too short. If the pipe is recessed being 1/2" drywall when inserted, a wrench cannot be used to turn it as the end of the hex shaft will be flush with the wall.
All of my frustration could have been avoided if a disclaimer that "This will not work on shower head pipes due to their larger, thin walled, inside diameter".
April 5, 2016
Rated 2.0 out of 5.0 by Homeowner Not effective for shower arm
May work for standard pipes but interior diameter sir broken shower arm is in between sizes.
April 19, 2016
Rated 1.0 out of 5.0 by Josh Wrong size most common problem
Whoever developed this product and didn't include an extractor for half inch shower arm should be fired.
March 18, 2016