Message to Our Customers


Model # H99TAT-6PK

Internet # 100075582

Store SKU # 959397

4 in. Aluminum Recessed Lighting New Construction Non-IC Air-Tite Housing (6-Pack)

This item has been discontinued.
The Home Depot no longer carries this specific product.

$94.56 /  case


Model # H99TAT-6PK

Internet # 100075582

Store SKU # 959397

The small aperture Halo 4 in. 50-Watt New Construction Recessed Housings (6-Pack) for accent lighting feature a 5-1/2 in. height suitable for 2 in. x 6 in. joist construction and 1 in. thick ceilings.

  • Aluminum reflector finish
  • Features an integral thermal protector to guard against misuse of insulation materials or improper lamping
  • For non-insulated ceilings or where insulation can be kept 3 in. from housing
  • Pre-installed and captive bar hangers on the housing can be positioned to any point within a 24 in. joist space
  • Bar hangers also fit onto T-bars for easy installation into drop ceilings
  • UL approved and CSA certified
  • Note: Product may vary by store

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Aperture width (in.) 
Assembled Depth (in.) 
5.25 in 
Assembled Height (in.) 
5.5 in 
Assembled Width (in.) 
8 in 
Housing depth (in.) 
Product Width (in.) 
14.5 in 
4 in. 
Collection Name 
4 inch 
Insulation contact 
Non-insulation contact 
Light Bulb Base Code 
Light Source 
New Construction or Remodel 
New Construction 
Number of Housings Included 
Product Weight (lb.) 
15.72 lb 
Recommended bulb type 
Reflector finish family 
Warranty / Certifications
Certifications and Listings 
1-UL Listed,CSA Listed 
ENERGY STAR Certified 
Manufacturer Warranty 
1 year 


Rated 3.5 out of 5 by 2 reviewers.
Rated 5.0 out of 5.0 by Very Nice Very easy to install between floor joists, and easy to adjust to make level. Easy to cut down the braces, too, for narrow floor joists. Basically, easy in every way. We've only tried the housings with bulbs so far, no trim. So, I can't comment on the trim fit. For our install, we found it best to lightly nail all the housings in place to plan out the room. Then, once we were satisfied with the arrangement we took each housing down one by one, wired them, and then installed permanently. The junction box attached to each housing has bushings installed. It also has standard punch-out holes. For a lot of the housings I used the punch out holes and purchased bags of locking plastic bushings which snapped into the punch-out. These gripped the 12-2 more firmly and allowed the housing to hang for a moment on the incoming wire as I hooked up the outgoing wire. The included grommets work fine, but they won't grip hard on the wire. October 29, 2010
Rated 2.0 out of 5.0 by Poor Quality The cone holding the bulb is held in with cheap clips, a number of which broke when nailing the housing in place and required a trip to HD for replacements. Very cheaply made. Would find a better quality fixture next time. April 14, 2013
  • 2015-05-22T11:13:44.057-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_100075582, prod, sort_default
1-2 of 2


Store Exclusive. This item is available for purchase in select stores only.