0080083697700

Halo

Model SLD606930WHR

Internet #204732275

Store SKU #1000030242

5 in. and 6 in. Matte White Recessed LED Surface Disk Light with 90 CRI, 3000K

$34.97 /each

Frequently Bought Together

Product Overview

This Halo LED Disk Light is a universal surface mount. It replaces bulbs, flush mounts, recessed trims, and fits in most junction boxes and recessed housings. Features wave stream LED technology to create an ultra-low profile surface mounting luminaire with the performance and look of a traditional down light. The surface disk light has a 6 in. nominal aperture and is designed for installation in many standard 4 in. x 2-1/8 in. square, octagon and round junction boxes. It may also retrofit in 5 in. and 6 in. aperture IC and Non-IC recessed housings. The units integral 120-Volt LED driver is designed for compatibility with leading edge and trailing edge phase control dimmers. Dedicated LED wiring connector meets high efficacy code requirement when used in recessed downlighting. This unit is suitable for residential or commercial applications.

  • Flexible mounting with junction box bracket (included)
  • 90 CRI, 3000K, 675 Lumens
  • Lasts 22 years, up to $400 savings over the life of the fixture
  • Wet location, damp location, air-tite, insulation contact rated, and can be used with fire-rated ceiling system
  • Dimmable to 5% with select dimmers- electronic low-voltage dimmers are recommended for best performance
  • Can be installed in both a 5 in. and 6 in. recessed housings
  • Can be installed in 5 in. and 6 in. junction boxes for new construction, remodel and retrofit applications
  • Light output equivalent to 65-Watt traditional incandescent bulb at a fraction of the energy usage
  • California title 24 compliant and Energy Star qualified
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

8 Questions11 Answers

Customer Questions & Answers

5 in. and 6 in. Matte White Recessed LED Surface Disk Light with 90 CRI, 3000K
5 in. and 6 in. Matte White Recessed LED Surface Disk Light with 90 CRI, 3000K

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
3 answers

Watts used

This question is from 5 in. and 6 in. Matte White Recessed LED Surface Disk Light with 90 CRI, 3000K
Asked by
Read all my Q&A
December 28, 2015
How many watts or amps does one of these LEDs use? I'm trying to figure out how many I can put on a single dimmer switch.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (3)

Asked by
Seattle, WA, USA
Read all my Q&A
Home Improvement Profile: DIYer
April 30, 2016
Answer: 
12 WATTS
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 29, 2015
Answer: 
Dear valued consumer, as stated in the spec sheet, this unit uses 12.9 watts to operate.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

December 29, 2015
Answer: 
Hello Jay,
You can find all the specifications by:
Left click on the photo of the product you are interested in at Home Depot.com. Then detailed installation instructions and product specifications can be found by clicking on the orange arrow beside the word “specification” which is below the photo of this product on Home Depot.com. You will find an installation and user guide in a box to the right. Read More
Hello Jay,
You can find all the specifications by:
Left click on the photo of the product you are interested in at Home Depot.com. Then detailed installation instructions and product specifications can be found by clicking on the orange arrow beside the word “specification” which is below the photo of this product on Home Depot.com. You will find an installation and user guide in a box to the right. Read this over carefully to see if this is right for you.
For the 90CRI - input current=15a,
input power =12.9 w
Thanks for your inquiry.
Charlotte Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
2 answers

Is this available with bright white light instead of soft white?

This question is from 5 in. and 6 in. Matte White Recessed LED Surface Disk Light with 90 CRI, 3000K
Asked by
Read all my Q&A
November 4, 2015
You'd think people wouldn't want dingy light in everything!
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Lake Almanor, CA
Read all my Q&A
Home Improvement Profile: Professional
December 15, 2015
Answer: 
These put out excellent white light -- not dingy or dull at all. I've used them outside and inside, nice, bright, even lighting.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0

November 5, 2015
Answer: 
Dear valued consumer, this item is available in the Bright White, 3500K version. You would need to special order from your local home depot store referencing model # SLD606935WH.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
1 answer

What recessed bulbs compliment this kit?

This question is from 5 in. and 6 in. Matte White Recessed LED Surface Disk Light with 90 CRI, 3000K
Asked by
Read all my Q&A
July 6, 2016
I had to install these as I had duct work running directly above where I needed additional light, however, I also have exciting recessed lighting and have been unable to find LED bulbs that get even close to the same light as these put out. I tried finding 650 Lumen LED 65 Watt bulbs and it just didn't look the same......any ideas?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Woodstock, GA, USA
Read all my Q&A
Home Improvement Profile: DIYer
July 11, 2016
Answer: 
Unfortunately I think it will be trial and error. I replaced all the lighting at the same time with this unit, so I didn't have your issue. With the way that LED's differ in tone and intensity, I'm not sure you can find an LED replacement bulb that looks exactly like this one. This unit came with a screw in light bulb like adapter, I would consider buying another unit and using it in your existing Read More
Unfortunately I think it will be trial and error. I replaced all the lighting at the same time with this unit, so I didn't have your issue. With the way that LED's differ in tone and intensity, I'm not sure you can find an LED replacement bulb that looks exactly like this one. This unit came with a screw in light bulb like adapter, I would consider buying another unit and using it in your existing lighting. I think that's the only way to get them to look the same.
Hope this helps Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

How do I attach the light to the bracket

This question is from 5 in. and 6 in. Matte White Recessed LED Surface Disk Light with 90 CRI, 3000K
Asked by
Columbus, OH
Read all my Q&A
April 5, 2016
I am having the same difficulty as most of the reviewers. It is nearly impossible to get the light bracket to fit in to both openings in the fixture and then turn it to tighten and seal. I can get one side, but not both. I did get one to twist on, but now it won't seal against the cieling.

Love this light but HELP please
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

April 10, 2016
Answer: 
Dear valued consumer, there are two screws that are in the SLD disk light fixture that when removed, will allow you to easily twist and lock the fixture into place with the bracket. Please refer to page 4 of the instruction manual, “Mounting to a junction box”. The manual can be accessed from the home depot product page.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-18 T13:25:29.995-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204732275, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 58ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 18 reviewers.
Rated 3.0 out of 5.0 by Good replacement for the old lights HALO 6 inch LED Disk Light, 90CRI, 3000K comes with lot of installation options but it takes a little time to install it. Once installed it works great and a perfect replacement for old power guzzling bulbs. I replaced the laundry room light with this LED light that had a round junction box. I used the provided junction box bracket to install the light. It fits tight to the ceiling and looks great. It also does not gets very hot. April 30, 2016
Rated 5.0 out of 5.0 by excellent LED ceiling light replacement great for replacing ceiling fixtures. now there is no dust or bulbs to change May 17, 2016
Rated 5.0 out of 5.0 by Great light fixture alternative! Excellent product for appearance, quality (installed less than 3 weeks at this point - time will tell), a little pricy, but VERY easy to install. Highly recommend. And, delivery from Home Depot was fast. May 18, 2016
Rated 5.0 out of 5.0 by Love This Lighting! I remodeled my basement and hated the light fixture that stuck down from the ceiling. When I found this light I wasn't sure about it but thought I would give it a try and it was great. It mounts right over the junction box no special cans or inserts. The light is nice and bright. I only put up one light and it does a nice job of lighting up the room, any additional lighting I was planning on doing with lamps but not sure I will need to do it. I want to buy a couple more of these now. Not only are these attractive but high efficiency LED as well. June 10, 2015
Rated 4.0 out of 5.0 by Exactly what I needed, but not as simple as stated This was exactly what I needed for a kitchen retrofit with a finished bathroom above, so I couldn't count on where I might find existing pipes interfering with normal retrofit can units. This only took a j box, so it fit very nicely under the new plumbing upstairs. That being said, the hardest part is the actual assembly into the J box. You have to dress the wires short, and dress the connector wire with the filters above the bracket before assembly, as the entire space under the bracket is already allotted for the circuit brick. Then assembling the unit to the brackets is a major issue, I could always get one side to connect, but the second side always seemed to be a little off. That's because as you assemble the bracket, tension on the screws can warp it a bit, so it doesn't line up. I had to adjust the tabs by trial and error, and while I did get all the units up, I didn't get that satisfying click that the bracket clicked secure like I did when I was practicing the assembly on the counter. I'll have to take them down to paint the ceiling in a few weeks, so I'll give it a second shot then. Other than that, these are fantastic and I already bought some more. Used these to replace an overhead fluorescent, and it totally changed the look of the kitchen. Bright but dimmable. May 5, 2015
Rated 4.0 out of 5.0 by Closet Light Fixture Nice fixture for low head clearance in a small closet. Puts out good foot candles for size of fixture. April 13, 2016
Rated 2.0 out of 5.0 by Looks Nice - But A lot of Time to Install The good: looks nice, low profile, and bright. The bad: it didn't fit the j-box that I had in the ceiling. J box was too small. Consequently, wound up stripping out the j-box which included the ground lug, and the screw ports, also had to remove the connectors on the light fixtures and twist the wires together (i.e. no wire nuts) because it was too bulky. Don't know why, but the little transformer is not mounted to the LED module, so it flops around when trying to install the LED module. I also accidentally bent the mounting bracket which prevented me from twist locking the LED module to the ceiling like it was intended, I did a "tacky" and used screw to secure the light fixture to the ceiling. I am going to wait for a day to get some paint on he screws to blend it in. So, this is not a simple weekend job. However, if you're resourceful, you can do what I just did, I went to the extra effort just because I had so much time invested in the work and my "pride" was there , that I was compelled to see this through. This took me 2 weekends, I have a sore back and tired arms and fingers from all this overhead work. Thought I'd share some photos that I annotated March 8, 2015
Rated 5.0 out of 5.0 by Best Light So easy to install. Light is so much brighter than LED we replaced. Love! March 15, 2016
  • 2016-08-22 T13:57:25.683-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_18, tr_18
  • loc_en_US, sid_204732275, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 54ms
  • REVIEWS, PRODUCT