Model # H7ICAT-6PK

Internet #202522896

Store SKU #433504

Halo 6 in. Aluminum Recessed Lighting New Construction IC Air-Tite Housing (6-Pack)
0662400210016

Halo

6 in. Aluminum Recessed Lighting New Construction IC Air-Tite Housing (6-Pack)

  • 6˝ Aperture, New Construction, ICAT 120V Line Voltage
  • For installations that require direct contact with insulation
  • Pass-N-Thru allows bar hangers shortening without
$50.55 /case

Frequently Bought Together

Product Overview

The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with 1 basic housing. H7ICAT is for installations where the housing will be in direct contact with insulation, and also meet restricted air flow requirements.

  • Air-tite design
  • Aluminum construction for greater heat dissipation
  • Use in new-construction applications
  • Compatible with installations where the housing will be in direct contact with insulation
  • For use in residential and commercial applications
  • Meets restricted air-flow requirements
  • 6 units per case pack

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can LED bulbs be used with these fixtures?

Can LED bulbs be used with these fixtures?
Asked by: Zoolander
yes I installed led canlites
Answered by: Jeff
Date published: 2017-01-17

Can i use a dimmer with this product?

Asked by: tt
Yep! I used a Lutron LED/CFL dimmer for mine (since I was installing LED bulbs). Will work with all dimmers.
Answered by: AndyinVA
Date published: 2017-01-07

Does the kit also come with the flanges and baffels?

sdfvs
Asked by: mxg
It only comes with the pot into which you can put the flanges and baffles. It holds the bulb, but does not have any of the decorative trim or otherwise.
Answered by: AndyinVA
Date published: 2017-01-07

is this fixture allowed to be used for front porch exterior?

Asked by: raymond
If the fixture itself is installed in a dry space like your attic you can use it if you buy a "shower" trim.
Answered by: Tony
Date published: 2016-09-20
  • y_2017, m_3, d_28, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_, sid_202522896, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 23ms
  • QUESTIONS, PRODUCT

Customer Reviews

6 in. Aluminum Recessed Lighting New Construction IC Air-Tite Housing (6-Pack) is rated 4.5 out of 5 by 21.
Rated 5 out of 5 by from I bought this 6-pack case in October 2016. I'm a DIYer and purchased these to use during a pretty... I bought this 6-pack case in October 2016. I'm a DIYer and purchased these to use during a pretty extensive bathroom renovation, installed in an attic above the master batch. While I've had experience with recessed lights in the past, these are particularly great and simple to use. The quick connect electrical connections were particularly awesome (I uploaded a picture showing it as it comes with the product). Simply snap the wire connections into place and BAM, onto the next one. I definitely prefer these connections to having to use wire nuts, which I often have to do with other fixtures because they come with just filament wire to connect to your load wires. The junction box attached to the housing has two punchouts on either side and three on top, which gives you plenty of options for running wiring. I happened to be running 12-gauge wire in my project, and they were plenty wide to accommodate. Since this housing was being put into my attic, I needed it to be IC-rated to enable it to directly touch insulation, and this fit the bill nicely. They're also "air-tite," which I believe just refers to the small foam seal that surrounds the light opening to stop air movement between non-insulated spaces and your living space (yay for energy efficiency!). Also, according to specifications, the light is suitable for use in damp locations, such as over showers or in your bathroom, but that's also largely dependent upon what kind of light fixture you install into the housing. I installed these on a 20-amp circuit using 12-gauge wire and a dimmer switch. The dimmer operates them perfectly. Installation is pretty straightforward--cut a circle in your drywall slightly larger then the opening of the light, then stretch out the bar hangers flush with your joists and nail them into place. I encountered some issue with the nails supplied in the bar hangers where a lot of them would bend (I swear I know how to use a hammer properly!), but they still sit in place just fine and there are other pre-made holes in the bar hangers that you could use other nails/screws if you're worried about it. All-in-all, I consider this a definitive buy. IC-rating, air-tight housing, and easy installation is the name of the game. A word of caution if you're remodeling, however, is to check how much space you have to install them in before buying (they take up quite a bit of space).
Date published: 2017-01-06
Rated 5 out of 5 by from Trusted, Tried and True The design and construction of the HALO H71CAT met all my needs. I've used it several times in the past and just bought a Six-Pack to do a workshop in my garage. The quick connectors inside the housing made my job very easy. Good Design, reliable and easy to use. I won't use any other brand.
Date published: 2016-10-18
Rated 5 out of 5 by from Halo recessed cans I absolutely recommend halo brand recessed cans to all contractors. Installation is fast and easy. I have never encountered any problems with this brand.
Date published: 2016-12-07
Rated 1 out of 5 by from New halos are terrible The new halos (not the strictly LED models) are incredibly difficult to work with. The junction box is not as solid as the old model, the jbox covers fall off while piping/wiring. VERY disappointed. The ones for use with strictly LED trims are made the same as the old model.
Date published: 2017-03-20
Rated 5 out of 5 by from Units were easy to install and adjust. pre set nails helped hold the unit while minor adjustment ... Units were easy to install and adjust. pre set nails helped hold the unit while minor adjustment was done. Also loved the electrical connections and junction box.
Date published: 2016-12-06
Rated 5 out of 5 by from I have installed to date almost 500 of this can... I have installed to date almost 500 of this can light. Not one failure. Halo is an excellent brand and very easy to install. Buy with confidence.
Date published: 2017-02-14
Rated 4 out of 5 by from Really easy to install and hook up - boxes came... Really easy to install and hook up - boxes came delivered beat up with arms on the cans slightly bend but that didn't affect the product much.
Date published: 2017-02-07
Rated 5 out of 5 by from These recessed cans are a breeze to install and wire. Great value. These recessed cans are a breeze to install and wire. Great value.
Date published: 2016-11-08
  • y_2017, m_3, d_28, h_15
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_21
  • loc_, sid_202522896, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 20ms
  • REVIEWS, PRODUCT