Halo 6 in. Matte White LED Directional Recessed Lighting Trim-694WB - The Home Depot


Model # 694WB

Internet # 203310681

Store SKU # 287611

6 in. Matte White LED Directional Recessed Lighting Trim

Halo 6 in. Matte White LED Directional Recessed Lighting Trim

This item has been discontinued.
The Home Depot no longer carries this specific product.

$29.97 / each


Model # 694WB

Internet # 203310681

Store SKU # 287611

Upgrade your lighting with the Halo ML56 series of high performance recessed LED lighting. ML56 Light modules feature an inside frost lens that looks like a traditional lamp. Part of a wide selection of 5 in. and 6 in. trims, this trim is for use only in conjunction with the Halo ML56 series of LED light modules.

  • For 6 in. apertures
  • White finish
  • Reflector and baffle trims make ML56 air-tite for compliance to applicable state and local codes, and make any housing air-tite
  • Damp location compatible


Aperture width (in.)  6.0  Assembled Depth (in.)  2 in 
Assembled Height (in.)  6 in  Assembled Width (in.)  6 in 
Size  6 in. 
Adjustable Lamp Head  Yes  Collection Name  na 
Fixture Finish  White  Fixture finish family  White 
Fixture\track material  Metal  Light Source  LED 
Product Weight (lb.)  0.5 lb  Returnable  90-Day 
Warranty / Certifications
Certifications and Listings  1-UL Listed,CSA Listed  Manufacturer Warranty  1 year 


Rated 4.0 out of 5 by 1 reviewer.
Rated 4.0 out of 5.0 by Eyeball Trim The picture on the website is wrong. This is the 694WB EyeBall Trim and they show the 691WB Shallow Baffle Trim in the picture. Used with the ML56 LED module it provides a very stylish light. The locking leaves a bit to be desired though. You put the ML56 in the trim and turn to lock but it doesn't ever feel like it completely locks in and one came loose when I installed it and had to be removed and reseated. Once in though it should be pretty secure. The instructions are a bit light on how to use the springs. It took me a few tries to realize they had to be bent inside the C clips inside the can. Basically there is one C shaped clip on each side of the can and you squeeze the spring till each arm is pointing straight up then place the two arms inside the C clip. Once in the whole unit can just be pushed up and the springs will bow outwards providing a positive upward force to hold the unit securely against the ceiling. Figuring this out while 15ft up a ladder wasn't fun for someone who is scared senseless of heights. I would also strongly recommend doing the wiring first and then before mounting the light using some clean cotton gloves. The white ceramic material marks very easily and is very difficult to clean. I also found it easier to remove the ground wire and rejoin to the ML56 as the last step rather than holding the ML56 while trying to deal with persnickety can screws. November 26, 2012
  • 2015-03-30T10:05:58.027-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co-hasreviews, tv_1, tr_1
  • loc_en_US, sid_203310681, prod, sort_default
1-1 of 1


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.