Halo 6 in. White Dimmable CFL Insulation Contact Air-Tite New Construction Recessed Housing-H273ICAT1D at The Home Depot
Free shipping
Discontinued

Halo

Model # H273ICAT1D

Internet # 100646954

6 in. White Dimmable CFL Insulation Contact Air-Tite New Construction Recessed Housing


Halo 6 in. White Dimmable CFL Insulation Contact Air-Tite New Construction Recessed Housing
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$85.38 / each
Item cannot be shipped to the following state(s): GU,PR,VI

PRODUCT SOLD Online Only

In Stock

Loading...

PRODUCT OVERVIEW

Model # H273ICAT1D

Internet # 100646954

This 6 in. CFL new construction housing is fully a fully dimmable CFL. It is an energy star qualified housing that reduces energy consumption while providing generous light output with pleasing color temperatures. It meets all applicable requirements of California Title 24 and is IC rated for direct contact with insulation.

  • Dimmable CFL new construction recessed housing
  • Recommend using 32 watt TTT (triple twin tube) CFL lamps (not included)
  • A wide choice of trims are available
  • Meets all applicable requirements of California Title 24

SPECIFICATIONS

Airtight  Yes  Aperture width (in.) 
Assembled Depth (in.)  3 in  Assembled Height (in.)  4.75 in 
Assembled Width (in.)  4.75 in  Certifications and Listings  1-UL Listed,CSA Listed,IC Rated 
ENERGY STAR Certified  Yes  Housing depth (in.)  10.5 
Insulation contact  Insulation contact  Light Bulb Base Code  Other 
Light Source  Fluorescent  Manufacturer Warranty  standard 
New Construction or Remodel  New Construction  Number of Housings Included 
Product Weight (lb.)  3.7 lb  Product Width (in.)  11.8 
Recommended bulb type  CFL  Reflector finish family  White 
Returnable  90-Day  Size  6 in. 

CUSTOMER REVIEWS

Rated 5 out of 5 by 1 reviewer.
Rated 5 out of 5 No issues at all I installed 2 - H272ICAT units in my multi-purpose room with a 10' ceiling. Installation was easy with the push-in nut connectors and the adjustable hanger arms. The manufacturer recommends Mark 10 (Mark X) dimmer which I installed (cost ~ $25 - $35 depending on color). As with most ICAT units, there is still a air gap between the light canister and the flat frame which I sealed with foam. The light output using a 26W TTT 2700K lamp is very good. Note there is no adjustable base lamp socket which I found lacking since TTT lamps come in lengths from 4.5 to 6.5 inches. The Lutron Diva dimmer has a adjustable output which had to be tweaked north of half-way to allow enough start-up voltage to the CFL. In my estimation full dimming is about 50% of maximum output. These units cost 8x more than non-CFL ICAT, but I plan to have these running year-around which might be cost effective after a few years. January 8, 2013
1-1 of 1

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.