0046335947788

Hampton Bay

Model HB7045-292

Internet #202504721

Store SKU #296466

2-Light Aged Iron Outdoor Flush Mount

$39.97 /each

Frequently Bought Together

Product Overview

The Hampton Bay 2-Light Aged Iron Flush mount pairs durable die-cast aluminum housing with seeded glass and a classic aged iron finish. The lanterns flush mount design allows you to maximize the floor to ceiling height and is ideal for outdoor areas, such as covered porches, garages or car ports. Uses two 60-Watt incandescent light bulbs or comparable compact fluorescent light bulbs for energy-efficiency (not included).

  • Rugged die-cast aluminum housing is ideal for outdoor installation
  • Clear seeded glass is attractive
  • Aged iron finish complements a variety of styles
  • Flush mount installation is ideal for an entry foyer or covered porch
  • Easy installation with step-by-step instructions
  • Weather resistant for durability
  • Accepts compact fluorescent bulbs for energy savings
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

2-Light Aged Iron Outdoor Flush Mount
2-Light Aged Iron Outdoor Flush Mount

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
 
1 answer

Do you have a photo cell for this lamp I can buy?

This question is from 2-Light Aged Iron Outdoor Flush Mount
Asked by
El Paso Texas
Read all my Q&A
November 17, 2014
To be installed at the entrance of a comercial building secondary access door.

Flushmount 2-light outdoor hanging aged iron lantern, sku 296 466
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 21, 2014
Answer: 
Thank you for your recent inquiry with The Home Depot. We do sell a great selection of photo cells, including a Hampton Bay Photocell Replacement. It is Internet # 202022460, Store SKU # 594135. You should consult a qualified electrician if you have any electrical questions. Because this light fixture is only available in Home Depot stores, I believe the best advice would be to talk to one of our many Read More
Thank you for your recent inquiry with The Home Depot. We do sell a great selection of photo cells, including a Hampton Bay Photocell Replacement. It is Internet # 202022460, Store SKU # 594135. You should consult a qualified electrician if you have any electrical questions. Because this light fixture is only available in Home Depot stores, I believe the best advice would be to talk to one of our many Electrical Department professionals at your local Home Depot store. For any other questions, please visit your nearest local Home Depot store or call us at HomeDepot.com Customer Service 800-430-3376. Thank you for shopping Home Depot. Read Less
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2
1 of 1
  • 2016-08-29 T14:17:07.562-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202504721, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 104ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 2.5 out of 5 by 19 reviewers.
Rated 3.0 out of 5.0 by Not bad for the price Purchased at the store so I was able to see it on display before purchased. Only problem was that the 2 screws they ship that hold the mounting plate to the fixure base are too long. They come with lock nuts however after you set them to the correct height to allow for flush mounting they protrude through the top and keep the fixure from mounting tight to the ceiling. I corrected this by replacing theirs with 2 shorter screws. January 3, 2016
Rated 2.0 out of 5.0 by Looks nice, but poor quality Looks nice. However, as other reviewers have mentioned, the quality is poor, and it will not sit flush without some modification. I had to trim the excess pipe nipple/threaded rod for the center and both light sockets, and even then I had to scrap the mounting bracket and just screw the fixture directly to the ceiling box. The panes of glass are all held in individually by metal clips. Most of the clips are loose, though, and do not do a good job of holding the glass. A few dabs of RTV silicone in the corners of each pane (not visible from the outside when installed) secured the glass for me. December 27, 2013
Rated 1.0 out of 5.0 by Possibly the worst purchase I ever made This fixture bent without any application of force while trying to mount. Had to glue every piece of glass into the fixture before the final mount. PIECE OF JUNK!! Won't mount flush to the soffit. I also wish I had read some of the reviews before buying this scrap. April 12, 2015
Rated 2.0 out of 5.0 by Does not sit flush!!! Poor design/assembly/quality The unit does not sit flush to the ceiling. The threaded rods that bolt the two light sockets to the base each protrude beyond the bottom of the base. This requires that you drill two additional holes in your ceiling (which are hidden by the base) to receive them in order to push the base tight to the ceiling. I have two of these lights and they each have the same problem. One of the ceramic light sockets also was not attached to its base. I had to pull it out and re-fasten it with the decorative nut that had fallen off of it in shipping. Once these problems were fixed the light went up fine and looks good. December 8, 2011
Rated 1.0 out of 5.0 by Junk! Does not mount flush/tight; also, glass pieces in fixture are loose. Looks ok when up. Hoping there will not be heavy wind or rain :( February 15, 2015
Rated 5.0 out of 5.0 by attractive light; easy installation; works well The man who installed it for me said it was easy to install. It looks attractive; gives good light. It replaces a fixture of 40 years ago! My main concern was ease to replace bulbs. We'll see... December 10, 2014
Rated 4.0 out of 5.0 by Look great; good choice I looked at nearly everything available to replace four 40-year fixtures. I actually bought three different styles before deciding to install these. I chose not to do the electrical work and had my electrician remove the old and hook these up. He decided not to use some part during the installation, instead driving the attaching screws directly into the wood ceiling. Something doesn't fit correctly otherwise. They look great! June 26, 2013
Rated 1.0 out of 5.0 by beware This product is very difficult to install. The installation method combined with the fiberglass insulation makes it almost imposible to get a good flush mount. May 17, 2014
  • 2016-08-29 T14:40:57.773-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_19, tr_19
  • loc_en_US, sid_202504721, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 103ms
  • REVIEWS, PRODUCT