Model # HB7045-292

Internet #202504721

Store SKU #296466

Hampton Bay 2-Light Aged Iron Outdoor Flushmount

Hampton Bay

2-Light Aged Iron Outdoor Flushmount

$3997 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The Hampton Bay 2-Light Aged Iron Flush mount pairs durable die-cast aluminum housing with seeded glass and a classic aged iron finish. The lanterns flush mount design allows you to maximize the floor to ceiling height and is ideal for outdoor areas, such as covered porches, garages or car ports. Uses two 60-Watt incandescent light bulbs or comparable compact fluorescent light bulbs for energy-efficiency (not included).

  • Rugged die-cast aluminum housing is ideal for outdoor installation
  • Clear seeded glass is attractive
  • Aged iron finish complements a variety of styles
  • Flush mount installation is ideal for an entry foyer or covered porch
  • Easy installation with step-by-step instructions
  • Weather resistant for durability
  • Accepts compact fluorescent bulbs for energy savings
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Do you have a photo cell for this lamp I can buy?

To be installed at the entrance of a comercial building secondary access door. Flushmount 2-light outdoor hanging aged iron lantern, sku 296 466
Asked by: Alex
Thank you for your recent inquiry with The Home Depot. We do sell a great selection of photo cells, including a Hampton Bay Photocell Replacement. It is Internet # 202022460, Store SKU # 594135. You should consult a qualified electrician if you have any electrical questions. Because this light fixture is only available in Home Depot stores, I believe the best advice would be to talk to one of our many Electrical Department professionals at your local Home Depot store. For any other questions, please visit your nearest local Home Depot store or call us at Customer Service 800-430-3376. Thank you for shopping Home Depot.
Answered by: THDSUPPORT
Date published: 2015-10-08
  • y_2017, m_7, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_202504721, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 13ms

Customer Reviews

2-Light Aged Iron Outdoor Flushmount is rated 2.4 out of 5 by 20.
Rated 1 out of 5 by from Will not fit flush Will not fit flush without modification. Especially in newer homes that do not have deep junction boxes.
Date published: 2017-01-29
Rated 2 out of 5 by from Does not sit flush!!! Poor design/assembly/quality The unit does not sit flush to the ceiling. The threaded rods that bolt the two light sockets to the base each protrude beyond the bottom of the base. This requires that you drill two additional holes in your ceiling (which are hidden by the base) to receive them in order to push the base tight to the ceiling. I have two of these lights and they each have the same problem. One of the ceramic light sockets also was not attached to its base. I had to pull it out and re-fasten it with the decorative nut that had fallen off of it in shipping. Once these problems were fixed the light went up fine and looks good.
Date published: 2011-12-08
Rated 1 out of 5 by from Very Poor Quality! Beware of this very poor quality fixture. Housing does not sit flush with included bracket (standardized bracket)- if you want to use this as intended then better set some time aside to modify it to fit.
Date published: 2011-10-27
Rated 2 out of 5 by from Looks nice, but poor quality Looks nice. However, as other reviewers have mentioned, the quality is poor, and it will not sit flush without some modification. I had to trim the excess pipe nipple/threaded rod for the center and both light sockets, and even then I had to scrap the mounting bracket and just screw the fixture directly to the ceiling box. The panes of glass are all held in individually by metal clips. Most of the clips are loose, though, and do not do a good job of holding the glass. A few dabs of RTV silicone in the corners of each pane (not visible from the outside when installed) secured the glass for me.
Date published: 2013-12-27
Rated 1 out of 5 by from DOES NOT SIT FLUSH Poor design. Not a simple Installation like it should be. The name states Flushmount, But if you actually want it to sit flush against the ceiling that requires more modification. If you don't modify to accommodate the hardware under the base there will be a gap between the ceiling and base and look like a poor installation job. If I had to do it all over again I would have read the reviews first not bought this.
Date published: 2012-09-24
Rated 1 out of 5 by from Junk! Does not mount flush/tight; also, glass pieces in fixture are loose. Looks ok when up. Hoping there will not be heavy wind or rain :(
Date published: 2015-02-15
Rated 1 out of 5 by from Possibly the worst purchase I ever made This fixture bent without any application of force while trying to mount. Had to glue every piece of glass into the fixture before the final mount. PIECE OF JUNK!! Won't mount flush to the soffit. I also wish I had read some of the reviews before buying this scrap.
Date published: 2015-04-13
Rated 3 out of 5 by from Not bad for the price Purchased at the store so I was able to see it on display before purchased. Only problem was that the 2 screws they ship that hold the mounting plate to the fixure base are too long. They come with lock nuts however after you set them to the correct height to allow for flush mounting they protrude through the top and keep the fixure from mounting tight to the ceiling. I corrected this by replacing theirs with 2 shorter screws.
Date published: 2016-01-04
  • y_2017, m_7, d_19, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_, sid_202504721, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 59ms